Start here
A few places to begin, from the aircraft’s story to the people who fly it.
Aircraft and simulator background
The A32 Vixxen in Got Friends' manual uses a 100 hp Rotax 912iS and a fixed three-bladed propeller. Its wheeled configurations use 15-inch or 17.6-inch tyres. Flaperons combine the functions associated with roll control and flap extension.
Aeroprakt A32 Vixxen
Got Friends · Read more ↗Flaperons, trim and panel choices
The manual lists flaperon positions of 0, 10 and 20 degrees and identifies a pitch-trim lever. GMC307 and KAP140 panels are alternative cockpit arrangements. The software's adjustable cosmetic vibration is a separate presentation setting.
Aeroprakt A32 Vixxen
Got Friends · Read more ↗Optional navigation packages
Got Friends lists different installation requirements for PMS and TDS navigation products. PMS uses its base product without an extra aircraft pack; TDS requires a compatible base installation and Got Friends' expansion.
Aeroprakt A32 Vixxen
Got Friends · Read more ↗Meet Aeroprakt A32 Vixxen
The A32 Vixxen in Got Friends' manual uses a 100 hp Rotax 912iS and a fixed three-bladed propeller. Its wheeled configurations use 15-inch or 17.6-inch tyres. Flaperons combine the functions associated with roll control and flap extension.
The simulator offers alternative GMC307 and KAP140 cockpit arrangements. Its pitch-trim lever is separate from those avionics choices, and cosmetic vibration has its own adjustment.
Aeroprakt A32 Vixxen
Aeroprakt → · Explore the family →
Aeroprakt A32 Vixxen
Got Friends · Aeroprakt Vixxen Download original download ↗Aircraft type designators
No type designator selected for this reference.
History & design
A new fuselage around a familiar wing
Foxbat Australia dates the A32 Vixxen’s launch to 2015. It describes the aircraft as sharing the Foxbat wing but using a different fuselage and tail. The A32 is therefore a distinct development within Aeroprakt’s two-seat family.
Foxbat Australia · Foxbat Australia: A32 introduction ↗Distributor development history
Systems & details
Flaperons, trim and panel choices
The manual lists flaperon positions of 0, 10 and 20 degrees and identifies a pitch-trim lever. GMC307 and KAP140 panels are alternative cockpit arrangements. The software's adjustable cosmetic vibration is a separate presentation setting.
Optional navigation packages
Got Friends lists different installation requirements for PMS and TDS navigation products. PMS uses its base product without an extra aircraft pack; TDS requires a compatible base installation and Got Friends' expansion.
In your simulator
Systems, equipment and documentation for each developer’s aircraft.
MSFS 2020 · MSFS 2024Got Friends Aeroprakt A-32 Vixxen
Got Friends · Released
Got Friends Aeroprakt A-32 Vixxen
Got Friends · Released
Manuals & resources
Find your next read
Choose a topic for a short introduction and a link to the original source. Simulator references identify the developer and edition they cover.
Developer documentation
Current Got Friends avionics enhancement prerequisitesAeroprakt A32 Vixxen
PMS and TDS aircraft lists
Got Friends · Read the source ↗Aeroprakt Vixxen Download original downloadAeroprakt A32 Vixxen
Aeroprakt A-32 Vixxen – Got FriendsAeroprakt A32 Vixxen
Product description and feature list
Developer · Read the source ↗Read the original documentation from the people who created it. Manuals open on their publisher’s website.
Developer documentation
Current Got Friends avionics enhancement prerequisitesGot Friends · PMS and TDS aircraft lists Aeroprakt Vixxen Download original downloadGot Friends · PDF6-9 Aeroprakt A-32 Vixxen – Got FriendsDeveloper · Product description and feature listAircraft history
Foxbat Australia: A32 introductionFoxbat Australia · Distributor first-hand account of the 2015 A32 launchBuilt-in force-feedback profiles
Read the documentary basis, editable starting settings and remaining questions for the aircraft you fly. Each explanation refers to the exact profile revision shown.
Catalogue programme-20261011-v3 · 2 profile choices
Got Friends Aeroprakt A-32 Vixxen
Got Friends · Free and Pro · Revision 5 · Inherited starting point
MSFS 2020 · MSFS 2024
A light aircraft represented with a Rotax 912iS, fixed gear and combined flaperons.
Aeroprakt A32 Vixxen
Free and Pro · Revision 1 · Partial review
MSFS 2020 · MSFS 2024 · X-Plane 12
A light aircraft represented with a Rotax 912iS, fixed gear and combined flaperons.
Aeroprakt A32 Vixxen
A light aircraft represented with a Rotax 912iS, fixed gear and combined flaperons.
Aircraft and simulator scope
- Aeroprakt A32 Vixxen · MSFS 2020 · Variant starting point
- Aeroprakt A32 Vixxen · MSFS 2024 · Variant starting point
- Aeroprakt A32 Vixxen · X-Plane 12 · Variant starting point
Universal named airframe/configuration; intended MSFS2020/MSFS2024/XP12 starting point, not add-on or edition acceptance. · Physical facts and prior documentary review are reused from their archived dated sources; new market availability is not inferred.
The simulator model and controls
A light aircraft represented with a Rotax 912iS, fixed gear and combined flaperons.
How this profile feels
Spring resistance builds with the selected airspeed response. A separate aerodynamic term adds speed-dependent control load.
Valid trim provides the configured pressure relief. Autopilot following is off.
Aircraft and configuration
Fixed tricycle gear, 100 hp Rotax 912 iS and three-blade fixed-pitch propeller.
Flaperons, trim and panel choices
The manual lists flaperon positions of 0, 10 and 20 degrees and identifies a pitch-trim lever. GMC307 and KAP140 panels are alternative cockpit arrangements. The software's adjustable cosmetic vibration is a separate presentation setting.
Optional navigation packages
Got Friends lists different installation requirements for PMS and TDS navigation products. PMS uses its base product without an extra aircraft pack; TDS requires a compatible base installation and Got Friends' expansion.
About the values
Strengths are normalized hardware-feel settings. They set the effect balance; hand force depends on the device and its limits. The IAS reference is a tuning value.
What the documentation establishes
Aeroprakt A32 Vixxen: Fixed tricycle gear, 100 hp Rotax 912 iS and three-blade fixed-pitch propeller.
Documentary review and sources
These decisions describe the documentary basis and remaining gaps for this revision. Aircraft documentation and a starting setting describe different kinds of evidence.
Aircraft and variant
ReviewedA light aircraft represented with a Rotax 912iS, fixed gear and combined flaperons.
Flight controls
InheritedA light aircraft represented with a Rotax 912iS, fixed gear and combined flaperons.
Trim
InheritedThe manual lists flaperon positions of 0, 10 and 20 degrees and identifies a pitch-trim lever. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.
Autopilot and stability
ReviewedAutopilot following is off; the configured spring and load retain the hardware feel.
Equipment
InheritedFixed tricycle gear, 100 hp Rotax 912 iS and three-blade fixed-pitch propeller.
Speeds and limits
InheritedThe indicated-speed references set the profile response scale; they are separate from aircraft operating limits.
Simulator integration
ReviewedThe profile targets msfs2020, msfs2024, xplane12. Add-on-specific controls use only the supported references configured by this profile.
Force-feedback settings
InheritedThe settings define the profile’s effect balance. Device output limits affect physical hand force.
Starting settings and their rationale
These configured values are starting estimates. The explanations describe what each setting controls; physical validation appears separately below.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0.74 | What it controls and whyThe manual lists flaperon positions of 0, 10 and 20 degrees and identifies a pitch-trim lever. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 50 KIAS. |
| Master force gain | Starting value0.85 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| Profile force gain | Starting value0.8 | What it controls and whyThe aerodynamic-load gain is 0.8 with an indicated-speed reference of 95 KIAS. This supplies speed-dependent loading alongside the spring. |
| Force tuning speed/reference | Starting value95 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Spring response reference speed | Starting value50 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Aileron force scale | Starting value0.76 | What it controls and whyRoll and pitch aerodynamic scales are 0.76 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value1 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Trim feel | Starting valueDisabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueEnabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
All 44 starting settings and their rationale
The settings define the profile’s effect balance. Device output limits affect physical hand force.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0.74 | What it controls and whyThe manual lists flaperon positions of 0, 10 and 20 degrees and identifies a pitch-trim lever. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 50 KIAS. |
| Profile force gain | Starting value0.8 | What it controls and whyThe aerodynamic-load gain is 0.8 with an indicated-speed reference of 95 KIAS. This supplies speed-dependent loading alongside the spring. |
| Elevator force scale | Starting value1 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Aileron force scale | Starting value0.76 | What it controls and whyRoll and pitch aerodynamic scales are 0.76 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
Aeroprakt A32 Vixxen: Manual lever/readback normalization requires installed confirmation; no camera vibration converted to force. Estimated pitch/roll trim authorities 0.3/0; exact add-on sign, travel, units and build-specific neutral remain unqualified. Rudder trim never substitutes for roll trim.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Elevator Authority | Starting value0.3 | What it controls and whyThe manual lists flaperon positions of 0, 10 and 20 degrees and identifies a pitch-trim lever. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0. |
| Aileron Authority | Starting value0 | What it controls and whyScales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
Aeroprakt A32 Vixxen: 95 KIAS is the retained estimated tuning reference. It is not published cruise TAS, VNE, a new flight limit or a measured force threshold. Source-specific operating quantities remain attached to their original configuration and conditions.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Force tuning speed/reference | Starting value95 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
Flaperon animation and engine modeling do not measure movement-texture or engine-force gains.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Gain | Starting value0.12 | What it controls and whyFlaperon animation and engine modeling do not measure movement-texture or engine-force gains. |
| Gain | Starting value0.12 | What it controls and whyFlaperon animation and engine modeling do not measure movement-texture or engine-force gains. |
Exact configured values with software explanations. Force magnitudes remain editable estimates; disabled features retain inactive values.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring deadband | Starting value0.04 | What it controls and whySets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Master force gain | Starting value0.85 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| QBlend Enabled | Starting valueEnabled | What it controls and whyAllows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| QSpring Minimum Factor | Starting value0.55 | What it controls and whySets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| QSpring Start Knots | Starting value20 kt | What it controls and whySets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring response reference speed | Starting value50 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Airspeed spring stiffening gain | Starting value0.15 | What it controls and whyThe high-speed spring-stiffening gain is 0.15. It strengthens the permitted spring response above 50 KIAS, with the squared-speed ratio capped at 5. |
| Airspeed spring stiffening limit | Starting value5 | What it controls and whyLimits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Trim feel | Starting valueDisabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueEnabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Force Trim Enabled | Starting valueDisabled | What it controls and whyEnables local force trim, separate from aircraft-owned trim and add-on integration qualification. |
| GLoad Enabled | Starting valueEnabled | What it controls and whyAllows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| Rate Damping Enabled | Starting valueEnabled | What it controls and whyEnables rate damping with the configured coefficients and control law. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot follow authority | Starting value0.1 | What it controls and whySets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot neutral hold strength | Starting value0.6 | What it controls and whySets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Gain | Starting value0.35 | What it controls and whySets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Gain | Starting value0 | What it controls and whySets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Gain | Starting value0 | What it controls and whySets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Maximum flap index | Starting value3 | What it controls and whySets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Minimum flap index | Starting value2 | What it controls and whySets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Gain | Starting value0 | What it controls and whySets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Shaker Enabled | Starting valueDisabled | What it controls and whyPermits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Stick shaker amplitude | Starting value0.5 | What it controls and whySets triggered shaker strength; inactive while the shaker feature is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables ground effects; each still needs its own strength and contact or motion telemetry. |
| Gain | Starting value0.4 | What it controls and whySets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Gain | Starting value0.25 | What it controls and whySets gear-bump texture during ground motion, separate from touchdown impact. |
| Gain | Starting value0.65 | What it controls and whySets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Gain | Starting value0 | What it controls and whySets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Enabled | Starting valueEnabled | What it controls and whyEnables engine cues with nonzero settings and valid running-engine telemetry. |
| Enabled | Starting valueEnabled | What it controls and whyEnables accessory cues with configured strengths and observed accessory movement. |
| Gain | Starting value0 | What it controls and whySets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Limits and open questions
- Aeroprakt A32 Vixxen is a universal starting point; exact add-on matching, edition operation and physical hand-force calibration remain unqualified.
- Autopilot movement and unknown custom trim, failure or force-input signals are disabled. Confirm the selected equipment fit and trim direction for the implementation in use.
- Force magnitudes and speed tuning are editable inherited estimates. Owner physical and installed-aircraft acceptance remain pending.
Physical validation
No physical force validation is recorded in this public catalogue for this revision. Documentary review and software checks do not establish how a particular device feels.
Discuss this aircraft (0)
Questions, observations and useful sources from the community.
No published discussions yet. Bring a question or share a useful source.
Open aircraft discussions →Content expanded · What’s new
Something missing or a source that needs attention?
Suggest a correction ↗
