Start here
A few places to begin, from the aircraft’s story to the people who fly it.
Meet the aircraft
The Trislander developed the Britten-Norman Islander into a three-engine passenger aircraft. The British Airliner Collection identifies its preserved 1977 example as having carried passengers and served as an air ambulance.
Britten-Norman BN-2A Trislander
British Airliner Collection · Read more ↗Meet Britten-Norman BN-2A Trislander
The Trislander developed the Britten-Norman Islander into a three-engine passenger aircraft. The British Airliner Collection identifies its preserved 1977 example as having carried passengers and served as an air ambulance.
Britten-Norman BN-2A Trislander
Britten-Norman → · Explore the family →
Britten-Norman BN-2A Trislander
British Airliner Collection · Airliners - The British Airliner Collection ↗Aircraft type designators
No type designator selected for this reference.
History & design
An Islander with more capacity
The second Islander prototype became the Trislander through a fuselage stretch and the addition of an engine above the fin. It first flew on 11 September 1970, with deliveries beginning in June 1971. The design kept the utility-airliner emphasis on short routes and simple loading.
Duxford Aviation Society · Britten-Norman Trislander G-BEVT ↗Duxford Aviation Society: development and G-BEVT BN-2A Mk III-2
A Channel Islands working life
Duxford’s G-BEVT first flew in 1977 and joined Aurigny in 1983. It accumulated 86,603 flights, averaging about twenty minutes each, before its final journey from Alderney to Duxford in June 2017.
Duxford Aviation Society · Britten-Norman Trislander G-BEVT ↗Duxford Aviation Society: development and G-BEVT BN-2A Mk III-2
Systems & details
Doors instead of an aisle
Five doors provided access to the seat rows without a central aisle. Removing seats offered a long freight space, while air-ambulance work could use the forward cabin for a stretcher and attendant.
The long nose is a variant feature
G-BEVT is a BN-2A Mk III-2. The extended nose provided additional luggage space; that feature distinguishes it from the earlier short-nose version. The museum aircraft’s career should not be read as the history of every Trislander.
In your simulator
Systems, equipment and documentation for each developer’s aircraft.
MSFS 2020 · MSFS 2024BN-2A Trislander
BlackBox Simulation · Released
BN-2A Trislander
BlackBox Simulation · Released
Manuals & resources
Find your next read
Choose a topic for a short introduction and a link to the original source. Simulator references identify the developer and edition they cover.
museum or collection history
Airliners - The British Airliner CollectionBritten-Norman BN-2A Trislander
The British Airliner Collection describes a 1977 Trislander that carried passengers and served as an air ambulance.
Collection overview gives family facts; its 1977 preserved airframe is a specific example.
British Airliner Collection · Read the source ↗Developer documentation
BN-2A Trislander — product listingBN-2A Trislander · MSFS 2020 · MSFS 2024
Product listing captured 2026-09-30; edition scope from the reviewed catalogue
BlackBox Simulation · Read the source ↗Read the original documentation from the people who created it. Manuals open on their publisher’s website.
museum or collection history
Airliners - The British Airliner CollectionBritish Airliner Collection · Collection overview gives family facts; its 1977 preserved airframe is a specific example.Product
Britten Norman Trislander BN2A – Product Home – BlackBox SimulationBlackBox Simulation · Product listing captured 2026-09-30; edition scope from the reviewed catalogueAircraft reference
Britten-Norman Trislander G-BEVTDuxford Aviation Society · Duxford Aviation Society: development and G-BEVT BN-2A Mk III-2Aircraft documentation
Report 09-004 aircraft particularsNew Zealand TAIC · TAIC Report 09-004, aircraft information section 1.3; ZK-LOU, serial 322, 1972 airframe.Built-in force-feedback profiles
Read the documentary basis, editable starting settings and remaining questions for the aircraft you fly. Each explanation refers to the exact profile revision shown.
Catalogue programme-20261022-v1 · 2 profile choices
BlackBox Britten-Norman Trislander
BlackBox Simulation · Free and Pro · Revision 2 · Inherited starting point
MSFS 2020 · MSFS 2024
A three-engine development of the Islander used for short-route passenger service.
Britten-Norman Trislander
Free and Pro · Revision 1 · Partial review
MSFS 2020 · MSFS 2024 · X-Plane 12
A three-engine development of the Islander used for short-route passenger service.
BlackBox Britten-Norman Trislander
A three-engine development of the Islander used for short-route passenger service.
Aircraft and simulator scope
- BlackBox Britten-Norman Trislander · BlackBox Simulation · MSFS 2020 · Add-on starting point
- BlackBox Britten-Norman Trislander · BlackBox Simulation · MSFS 2024 · Add-on starting point
The simulator model and controls
BlackBox Britten-Norman Trislander is the selected BlackBox Simulation configuration.
How this profile feels
Spring resistance builds with the selected airspeed response. A separate aerodynamic term adds speed-dependent control load.
Valid trim provides the configured pressure relief. Autopilot following is off.
Aircraft and configuration
The Trislander developed the Britten-Norman Islander into a three-engine passenger aircraft. The British Airliner Collection identifies its preserved 1977 example as having carried passengers and served as an air ambulance.
About the values
Strengths are normalized hardware-feel settings. They set the effect balance; hand force depends on the device and its limits. The IAS reference is a tuning value.
Documentary review and sources
These decisions describe the documentary basis and remaining gaps for this revision. Aircraft documentation and a starting setting describe different kinds of evidence.
Aircraft and variant
InheritedBlackBox Britten-Norman Trislander is the selected BlackBox Simulation configuration.
Flight controls
InheritedA three-engine development of the Islander used for short-route passenger service.
Trim
InheritedThe profile uses the trim behaviour configured below. Pitch authority 0.32 provides load relief and permitted centre movement; roll authority is 0.
Autopilot and stability
InheritedAutopilot following is off; the configured spring and load retain the hardware feel.
Equipment
InheritedThe Trislander developed the Britten-Norman Islander into a three-engine passenger aircraft. The British Airliner Collection identifies its preserved 1977 example as having carried passengers and served as an air ambulance.
Speeds and limits
InheritedThe indicated-speed references set the profile response scale; they are separate from aircraft operating limits.
Simulator integration
InheritedThe profile targets msfs2020, msfs2024. Add-on-specific controls use only the supported references configured by this profile.
Force-feedback settings
InheritedThe settings define the profile’s effect balance. Device output limits affect physical hand force.
Starting settings and their rationale
These configured values are starting estimates. The explanations describe what each setting controls; physical validation appears separately below.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0.74 | What it controls and whyThis profile uses reversible-control loading for Britten-Norman BN-2A Trislander. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 70 KIAS. |
| Master force gain | Starting value0.85 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| Profile force gain | Starting value0.8 | What it controls and whyThe aerodynamic-load gain is 0.8 with an indicated-speed reference of 120 KIAS. This supplies speed-dependent loading alongside the spring. |
| Force tuning speed/reference | Starting value120 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Spring response reference speed | Starting value70 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Aileron force scale | Starting value0.75 | What it controls and whyRoll and pitch aerodynamic scales are 0.75 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value1 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Trim feel | Starting valueDisabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueEnabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
All 44 starting settings and their rationale
The settings define the profile’s effect balance. Device output limits affect physical hand force.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0.74 | What it controls and whyThis profile uses reversible-control loading for Britten-Norman BN-2A Trislander. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 70 KIAS. |
| Spring deadband | Starting value0.045 | What it controls and whySets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Profile force gain | Starting value0.8 | What it controls and whyThe aerodynamic-load gain is 0.8 with an indicated-speed reference of 120 KIAS. This supplies speed-dependent loading alongside the spring. |
| Master force gain | Starting value0.85 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| QBlend Enabled | Starting valueEnabled | What it controls and whyAllows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| QSpring Minimum Factor | Starting value0.55 | What it controls and whySets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| QSpring Start Knots | Starting value25 kt | What it controls and whySets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring response reference speed | Starting value70 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Force tuning speed/reference | Starting value120 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening gain | Starting value0.15 | What it controls and whyThe high-speed spring-stiffening gain is 0.15. It strengthens the permitted spring response above 70 KIAS, with the squared-speed ratio capped at 5. |
| Airspeed spring stiffening limit | Starting value5 | What it controls and whyLimits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | Starting value0.75 | What it controls and whyRoll and pitch aerodynamic scales are 0.75 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value1 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
| Trim feel | Starting valueDisabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueEnabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Elevator Authority | Starting value0.32 | What it controls and whyThe profile uses the trim behaviour configured below. Pitch authority 0.32 provides load relief and permitted centre movement; roll authority is 0. |
| Aileron Authority | Starting value0 | What it controls and whyScales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| Force Trim Enabled | Starting valueDisabled | What it controls and whyEnables local force trim, separate from aircraft-owned trim and add-on integration qualification. |
| GLoad Enabled | Starting valueEnabled | What it controls and whyAllows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| Rate Damping Enabled | Starting valueEnabled | What it controls and whyEnables rate damping with the configured coefficients and control law. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot follow authority | Starting value0.1 | What it controls and whySets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot neutral hold strength | Starting value0.6 | What it controls and whySets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Gain | Starting value0.35 | What it controls and whySets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Gain | Starting value0 | What it controls and whySets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Gain | Starting value0 | What it controls and whySets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Maximum flap index | Starting value2 | What it controls and whySets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Minimum flap index | Starting value2 | What it controls and whySets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Gain | Starting value0 | What it controls and whySets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Shaker Enabled | Starting valueDisabled | What it controls and whyPermits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Stick shaker amplitude | Starting value0.5 | What it controls and whySets triggered shaker strength; inactive while the shaker feature is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables ground effects; each still needs its own strength and contact or motion telemetry. |
| Gain | Starting value0.4 | What it controls and whySets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Gain | Starting value0.25 | What it controls and whySets gear-bump texture during ground motion, separate from touchdown impact. |
| Gain | Starting value0.65 | What it controls and whySets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Gain | Starting value0 | What it controls and whySets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Enabled | Starting valueEnabled | What it controls and whyEnables engine cues with nonzero settings and valid running-engine telemetry. |
| Gain | Starting value0.12 | What it controls and whySets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Enabled | Starting valueEnabled | What it controls and whyEnables accessory cues with configured strengths and observed accessory movement. |
| Gain | Starting value0.12 | What it controls and whySets texture from observed flap movement; a command without movement does not establish the cue. |
| Gain | Starting value0 | What it controls and whySets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Limits and open questions
- Force amplitudes and curves are estimates. Installed-product and physical acceptance remain deferred.
- Current product1.2.0 and older public changelog1.1.7 differ. Tutorial acquisition returned a challenge page; the tutorial was not read.
- KAP140 servo following, adjustable roll trim, gust-lock status and per-engine thrust/propeller phase are unqualified. Those bespoke effects remain disabled.
- No distinct hand-force data support different propeller or cabin profiles. All four included variants intentionally use the same model.
- The pinned Islander parent is an implementation template, not a claim that Trislander is the same airframe. Dedicated internal aircraft identity remains a catalogue-enrichment task.
Physical validation
No physical force validation is recorded in this public catalogue for this revision. Documentary review and software checks do not establish how a particular device feels.
Discuss this aircraft (0)
Questions, observations and useful sources from the community.
No published discussions yet. Bring a question or share a useful source.
Open aircraft discussions →Content expanded · What’s new
Something missing or a source that needs attention?
Suggest a correction ↗