Start here
A few places to begin, from the aircraft’s story to the people who fly it.
Meet the aircraft
The Dynali H3 is a compact helicopter offered in ready-to-fly and kit forms. Its side-by-side cabin and conventional tail rotor give it the familiar arrangement of a utility helicopter at a smaller scale. VSKYLABS includes the classic EasyFlyer and newer Sport versions. Its X-Plane product uses native aircraft systems and supports interaction from a VR cockpit as well as a conventional screen.
Aircraft background
VSKYLABS · Read more ↗Released product and variants
The package includes classic EasyFlyer and newer Sport variants of the Dynali H3. Both belong to the developer’s light-helicopter range for X-Plane.
H3 EasyFlyer / Sport · VSKYLABS · X-Plane 11 · X-Plane 12
VSKYLABS · Read more ↗Into the cockpit
YouTube Dynali Helicopter Company · 5 min ·
DYNALI H3 SPORT OFFICIAL VIDEO 2019
Dynali introduces the H3 Sport helicopter and its manufacturing facility.
Real aircraft · Dynali H3
Watch on YouTube ↗Preview images are served by AirframeDB. Videos open on YouTube only when you choose to watch.
Meet Dynali H3
The Dynali H3 is a compact helicopter offered in ready-to-fly and kit forms. Its side-by-side cabin and conventional tail rotor give it the familiar arrangement of a utility helicopter at a smaller scale.
VSKYLABS includes the classic EasyFlyer and newer Sport versions. Its X-Plane product uses native aircraft systems and supports interaction from a VR cockpit as well as a conventional screen.
Dynali H3
Dynali → · Explore the family →
Dynali H3
VSKYLABS · VSKYLABS Aerospace Simulations Aircraft Center: VSKYLABS 'Test-Pilot': Dynali H3 ↗H3 EasyFlyer
VSKYLABS · VSKYLABS Aerospace Simulations Aircraft Center: VSKYLABS 'Test-Pilot': Dynali H3 ↗VSKYLABS · X-Plane 11 · X-Plane 12 →H3 Sport
VSKYLABS · VSKYLABS Aerospace Simulations Aircraft Center: VSKYLABS 'Test-Pilot': Dynali H3 ↗VSKYLABS · X-Plane 11 · X-Plane 12 →Aircraft type designators
Use the code for the model you are flying. The linked authority lists the applicable aircraft.
History & design
A light helicopter launched in 2013
Dynali’s October 2017 release dates the H3 launch to 2013. By that announcement the manufacturer reported more than fifty flying worldwide, with both complete aircraft and kits reaching overseas customers.
Dynali Helicopter Company (press release hosted by Airframer) · Expansion of Dynali markets continues, 10 October 2017 ↗Dynali press release, 10 October 2017, hosted by Airframer
An American demonstrator joins the fleet
The first United States-registered H3, N361EX, appeared in October 2017 as an importer’s demonstrator in Cincinnati. The same release described deliveries to South Korea, France and China and an order from New Zealand, illustrating the type’s expansion beyond Belgium.
Dynali Helicopter Company (press release hosted by Airframer) · Expansion of Dynali markets continues, 10 October 2017 ↗Dynali press release, 10 October 2017, hosted by Airframer
Systems & details
A small helicopter with conventional rotor controls
The H3 Sport pairs its four-blade anti-torque rotor with an automatic clutch and a governor. Dynali describes light control inputs and a cabin 1.30 m wide. The engine is modified for helicopter service, so its 135 hp rating should not be confused with an unmodified Rotax 912 ULS.
EasyFlyer, Sport and Open Air are not one specification
The figures here describe the manufacturer’s 135 hp H3 Sport. The Open Air has a different cabin treatment, while simulator packages may also include the earlier EasyFlyer. Match the selected aircraft’s documentation before borrowing weights, equipment or operating details from another version.
In your simulator
Systems, equipment and documentation for each developer’s aircraft.
X-Plane 11 · X-Plane 12H3 EasyFlyer / Sport
VSKYLABS · Released
H3 EasyFlyer / Sport
VSKYLABS · Released
Manuals & resources
Find your next read
Choose a topic for a short introduction and a link to the original source. Simulator references identify the developer and edition they cover.
Simulator documentation
Released product and variantsH3 EasyFlyer / Sport · VSKYLABS · X-Plane 11 · X-Plane 12
The package includes classic EasyFlyer and newer Sport variants of the Dynali H3. Both belong to the developer’s light-helicopter range for X-Plane.
Official developer / designated-store reference · checked 2026-09-14
VSKYLABS · Read the source ↗Read the original documentation from the people who created it. Manuals open on their publisher’s website.
Developer documentation
VSKYLABS Aerospace Simulations Aircraft Center: VSKYLABS 'Test-Pilot': Dynali H3VSKYLABS · Official developer / designated-store reference · checked 2026-09-14 VSKYLABS Dynali H3. A High-Definition Ultralight Helicopter Simulation for X-Plane.VSKYLABS · Official developer / designated-store reference · checked 2026-09-14Type designator
ICAO Doc 8643 — aircraft type designatorsInternational Civil Aviation Organization · Public search data retrieved 2026-09-14; authority update 2026-09-03Manufacturer documentation
H3 Sport and Open AirDynali · Dynali H3 Sport 135 hp manufacturer specification, retrieved October 2026Aircraft history
Expansion of Dynali markets continues, 10 October 2017Dynali Helicopter Company (press release hosted by Airframer) · Dynali press release, 10 October 2017, hosted by AirframerBuilt-in force-feedback profiles
Read the documentary basis, editable starting settings and remaining questions for the aircraft you fly. Each explanation refers to the exact profile revision shown.
Catalogue programme-20261022-v1 · 2 profile choices
VSKYLABS Dynali H3 EasyFlyer
VSKYLABS · Free and Pro · Revision 2 · Inherited starting point
X-Plane 12
VSKYLABS Dynali H3 EasyFlyer: The cyclic spring and damping approximate mechanical push-pull controls.
Dynali H3
Free and Pro · Revision 1 · Partial review
X-Plane 12 · X-Plane 11
Dynali H3: The cyclic spring and damping approximate mechanical push-pull controls.
Dynali H3
Dynali H3: The cyclic spring and damping approximate mechanical push-pull controls.
Aircraft and simulator scope
- Dynali H3 · X-Plane 12 · family starting point
- Dynali H3 · X-Plane 11 · family starting point
Dynali H3 · The Aircraft Center identifies XP12 v3.1.1 in March 2026 and includes Classic EasyFlyer and Sport variants; separate XP11/XP12 products are listed.
The simulator model and controls
The Dynali H3 is a compact helicopter offered in ready-to-fly and kit forms. Its side-by-side cabin and conventional tail rotor give it the familiar arrangement of a utility helicopter at a smaller scale.
This starting point selects Dynali H3. Its aircraft-level settings do not select a particular developer’s custom systems.
How this profile feels
The cyclic spring and damping approximate mechanical push-pull controls. Spring resistance builds with the selected airspeed response. A separate aerodynamic term adds speed-dependent control load. Cyclic damping adds resistance to hardware motion.
Governor selection is separate from trim; the acquired controls description does not establish an in-flight trim linkage. Local force trim is off. Autopilot following is off.
Controls and trim
Dynali documents push-pull cyclic and collective controls, adjustable friction and a rotor-sensed governor. The governor is an engine/rotor-regulation function. The preserved manufacturer and developer rotor-speed references differ, so they retain their named values and source context.
About the values
The gains are normalized profile settings. They describe the chosen effect balance; hand force depends on the device and its output limits. IAS references are tuning values rather than operating limits. Physical acceptance of this revision remains pending.
What the documentation establishes
The Aircraft Center identifies XP12 v3.1.1 in March 2026 and includes Classic EasyFlyer and Sport variants; separate XP11/XP12 products are listed.
Documentary review and sources
These decisions describe the documentary basis and remaining gaps for this revision. Aircraft documentation and a starting setting describe different kinds of evidence.
Aircraft and variant
ReviewedThis starting point selects Dynali H3. Its aircraft-level settings do not select a particular developer’s custom systems.
Flight controls
Not yet reviewedDynali documents push-pull cyclic and collective controls, adjustable friction and a rotor-sensed governor. The governor is an engine/rotor-regulation function. The preserved manufacturer and developer rotor-speed references differ, so they retain their named values and source context.
Trim
Not yet reviewedGovernor selection is separate from trim; the acquired controls description does not establish an in-flight trim linkage. Local force trim is off. Autopilot following is off.
Autopilot and stability
Not yet reviewedAutopilot following is off; the configured spring and load retain the hardware feel.
Equipment
Not yet reviewedGear, flap and ground cues follow the selected settings and available simulator-reported states.
Speeds and limits
Not yet reviewedThe indicated-speed references set the profile response scale; they are separate from aircraft operating limits.
Simulator integration
Not yet reviewedThe profile targets xplane12, xplane11. Add-on-specific controls use only the supported references configured by this profile.
Force-feedback settings
Not yet reviewedThe settings define the profile’s effect balance. Device output limits affect physical hand force.
Starting settings and their rationale
These configured values are starting estimates. The explanations describe what each setting controls; physical validation appears separately below.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0 | What it controls and whyThe cyclic spring and damping approximate mechanical push-pull controls. The baseline spring is 0. Its low-speed blend reaches baseline strength at 40 KIAS. |
| Master force gain | Starting value0.85 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| Profile force gain | Starting value0.35 | What it controls and whyThe aerodynamic-load gain is 0.35 with an indicated-speed reference of 80 KIAS. This supplies speed-dependent loading alongside the spring. |
| Force tuning speed/reference | Starting value80.0 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Spring response reference speed | Starting value40.0 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Aileron force scale | Starting value1 | What it controls and whyRoll and pitch aerodynamic scales are 1 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value1 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Trim feel | Starting valueDisabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueDisabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
All 44 starting settings and their rationale
The settings define the profile’s effect balance. Device output limits affect physical hand force.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0 | What it controls and whyThe cyclic spring and damping approximate mechanical push-pull controls. The baseline spring is 0. Its low-speed blend reaches baseline strength at 40 KIAS. |
| Spring deadband | Starting value0.02 | What it controls and whySets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Profile force gain | Starting value0.35 | What it controls and whyThe aerodynamic-load gain is 0.35 with an indicated-speed reference of 80 KIAS. This supplies speed-dependent loading alongside the spring. |
| Master force gain | Starting value0.85 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| QBlend Enabled | Starting valueEnabled | What it controls and whyAllows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| QSpring Minimum Factor | Starting value1 | What it controls and whySets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| QSpring Start Knots | Starting value11.2 kt | What it controls and whySets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring response reference speed | Starting value40.0 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Force tuning speed/reference | Starting value80.0 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening gain | Starting value0 | What it controls and whyAdds permitted spring resistance above the full-blend speed. Zero removes this high-speed increase. |
| Airspeed spring stiffening limit | Starting value5 | What it controls and whyLimits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | Starting value1 | What it controls and whyRoll and pitch aerodynamic scales are 1 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value1 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
| Trim feel | Starting valueDisabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueDisabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Elevator Authority | Starting value0.3 | What it controls and whyScales supported pitch-trim relief and permitted centre movement. Zero removes pitch response. |
| Aileron Authority | Starting value0.3 | What it controls and whyScales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| Force Trim Enabled | Starting valueDisabled | What it controls and whyGovernor selection is separate from trim; the acquired controls description does not establish an in-flight trim linkage. Local force trim is off. The stored latch parameters are inactive; the profile does not supply a local hold-where-left neutral. |
| GLoad Enabled | Starting valueDisabled | What it controls and whyAllows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| Rate Damping Enabled | Starting valueEnabled | What it controls and whyEnables rate damping with the configured coefficients and control law. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot follow authority | Starting value0.05 | What it controls and whySets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot neutral hold strength | Starting value0.6 | What it controls and whySets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Gain | Starting value0 | What it controls and whySets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Gain | Starting value0 | What it controls and whySets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Gain | Starting value0 | What it controls and whySets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Maximum flap index | Starting value1 | What it controls and whySets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Minimum flap index | Starting value1 | What it controls and whySets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Gain | Starting value0 | What it controls and whySets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Shaker Enabled | Starting valueDisabled | What it controls and whyPermits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Stick shaker amplitude | Starting value0.5 | What it controls and whySets triggered shaker strength; inactive while the shaker feature is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables ground effects; each still needs its own strength and contact or motion telemetry. |
| Gain | Starting value0 | What it controls and whySets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Gain | Starting value0 | What it controls and whySets gear-bump texture during ground motion, separate from touchdown impact. |
| Gain | Starting value0.5 | What it controls and whySets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Gain | Starting value0 | What it controls and whySets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Enabled | Starting valueEnabled | What it controls and whyEnables engine cues with nonzero settings and valid running-engine telemetry. |
| Gain | Starting value0.12 | What it controls and whySets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Enabled | Starting valueEnabled | What it controls and whyEnables accessory cues with configured strengths and observed accessory movement. |
| Gain | Starting value0 | What it controls and whySets texture from observed flap movement; a command without movement does not establish the cue. |
| Gain | Starting value0 | What it controls and whySets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Limits and open questions
- Native X-Plane flight modeling does not establish the H3 cyclic-force mechanism or hydraulics.
- The pages link a POH without documenting trim hardware in the captured text.
- No H3 automatic-flight system is described by the captured product pages.
- The short product text does not establish the retained piston, skid or rotor-blade configuration in enough detail for this review.
- No indicated-speed limit or80 knot loading reference is specified.
- Use of native X-Plane features does not define aircraft-specific external trim telemetry.
- The raw-control-response description does not measure cyclic forces or vibration at a desktop stick.
- Dynali H3 documentary evidence does not establish force-feedback hardware acceptance.
Physical validation
No physical force validation is recorded in this public catalogue for this revision. Documentary review and software checks do not establish how a particular device feels.
Discuss this aircraft (0)
Questions, observations and useful sources from the community.
No published discussions yet. Bring a question or share a useful source.
Open aircraft discussions →Content expanded · What’s new
Something missing or a source that needs attention?
Suggest a correction ↗
