Start here
A few places to begin, from the aircraft’s story to the people who fly it.
Meet the aircraft
The P6M-2 SeaMaster was a Martin flying boat powered by Pratt & Whitney J75 turbojets. The Smithsonian preserves a J75-P-2 engine identified as having powered this exact version, giving a direct link between the variant and its jet propulsion.
Martin P6M-2 SeaMaster
Smithsonian National Air and Space Museum · Read more ↗Meet Martin P6M-2 SeaMaster
Martin's P6M-2 SeaMaster was a flying boat powered by Pratt & Whitney J75 turbojets. The Smithsonian preserves a J75-P-2 engine that powered this version.
Martin P6M-2 SeaMaster
Aircraft type designators
No type designator selected for this reference.
History & design
A jet bomber that could leave the runway behind
Martin's SeaMaster combined a long hull, a sharply swept high wing and four turbojets mounted above the wing to reduce water-spray ingestion. The first XP6M-1 flew on 14 July 1955. The project aimed to bring jet performance to a large naval flying boat.
The P6M-2 changed from the earlier Allison installation to non-afterburning Pratt & Whitney J75 engines. The programme was cancelled in August 1959 after only three P6M-2s had been built. Virtavia explicitly labels its imagined early-1960s operational paint scheme as fictional; the type never entered that proposed service career.
Virtavia · P6M-2 Seamaster User Operating Manual ↗Virtavia manual introduction and historical model notes.
Systems & details
Water handling is part of the design
The manual describes wingtip floats, nose spray strips and a beaching cradle, as well as a rotary weapons bay that avoided conventional doors opening into the airflow. In the simulator, the cradle serves ground and water transitions. It is not a conventional retractable landing gear for routine runway operations.
In your simulator
Systems, equipment and documentation for each developer’s aircraft.
MSFS 2020Martin P6M-2 Seamaster
Virtavia · Released
Martin P6M-2 Seamaster
Virtavia · Released
Manuals & resources
Find your next read
Choose a topic for a short introduction and a link to the original source. Simulator references identify the developer and edition they cover.
manufacturer, operator, museum or archive primary source
Pratt & Whitney J75-P-2 Turbojet Engine | National Air and Space MuseumMartin P6M-2 SeaMaster
The Smithsonian identifies a preserved J75-P-2 turbojet as an engine used by the Martin P6M-2 SeaMaster.
Smithsonian engine object record confirms exact P6M-2 identification; broader aircraft role is not asserted.
Smithsonian National Air and Space Museum · Read the source ↗Developer documentation
Martin P6M-2 Seamaster — product listingMartin P6M-2 Seamaster · MSFS 2020
Product listing captured 2026-09-24; edition scope from the reviewed catalogue
Virtavia · Read the source ↗Martin P6M-2 Seamaster — product listingMartin P6M-2 Seamaster · MSFS 2020
Product listing captured 2026-09-24; edition scope from the reviewed catalogue
Virtavia · Read the source ↗Read the original documentation from the people who created it. Manuals open on their publisher’s website.
manufacturer, operator, museum or archive primary source
Pratt & Whitney J75-P-2 Turbojet Engine | National Air and Space MuseumSmithsonian National Air and Space Museum · Smithsonian engine object record confirms exact P6M-2 identification; broader aircraft role is not asserted.Product
Seamaster MSFS exact product and manual linksVirtavia · Product listing captured 2026-09-24; edition scope from the reviewed catalogue P6M-2 Seamaster User Operating ManualVirtavia · Product listing captured 2026-09-24; edition scope from the reviewed catalogueBuilt-in force-feedback profiles
Read the documentary basis, editable starting settings and remaining questions for the aircraft you fly. Each explanation refers to the exact profile revision shown.
Catalogue programme-20261022-v1 · 1 profile choice
Virtavia P6M-2 Seamaster
Virtavia · Free and Pro · Revision 2 · Inherited starting point
MSFS 2020
A jet-powered Martin flying boat represented by a preserved P6M-2 engine.
Virtavia P6M-2 Seamaster
A jet-powered Martin flying boat represented by a preserved P6M-2 engine.
Aircraft and simulator scope
- Virtavia P6M-2 Seamaster · Virtavia · MSFS 2020 · Add-on starting point
The simulator model and controls
Virtavia P6M-2 Seamaster is the selected Virtavia configuration.
How this profile feels
The spring stays independent of airspeed. A separate aerodynamic term adds speed-dependent control load.
Pitch-trim relief is off. Autopilot following is off.
Aircraft and configuration
Martin's P6M-2 SeaMaster was a flying boat powered by Pratt & Whitney J75 turbojets. The Smithsonian preserves a J75-P-2 engine that powered this version.
About the values
Strengths are normalized hardware-feel settings. They set the effect balance; hand force depends on the device and its limits. The IAS reference is a tuning value.
Documentary review and sources
These decisions describe the documentary basis and remaining gaps for this revision. Aircraft documentation and a starting setting describe different kinds of evidence.
Aircraft and variant
InheritedVirtavia P6M-2 Seamaster is the selected Virtavia configuration.
Flight controls
InheritedA jet-powered Martin flying boat represented by a preserved P6M-2 engine.
Trim
InheritedThe profile uses the trim behaviour configured below. Pitch relief is off, with stored authority 0; roll authority is 0.
Autopilot and stability
InheritedAutopilot following is off; the configured spring and load retain the hardware feel.
Equipment
InheritedMartin's P6M-2 SeaMaster was a flying boat powered by Pratt & Whitney J75 turbojets. The Smithsonian preserves a J75-P-2 engine that powered this version.
Speeds and limits
InheritedThe indicated-speed references set the profile response scale; they are separate from aircraft operating limits.
Simulator integration
InheritedThe profile targets msfs2020. Add-on-specific controls use only the supported references configured by this profile.
Force-feedback settings
InheritedThe settings define the profile’s effect balance. Device output limits affect physical hand force.
Starting settings and their rationale
These configured values are starting estimates. The explanations describe what each setting controls; physical validation appears separately below.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0.74 | What it controls and whyThis profile uses powered-control feel for Martin P6M-2 SeaMaster. The baseline spring is 0.74. Low-speed spring blending is off. |
| Master force gain | Starting value0.85 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| Profile force gain | Starting value0.25 | What it controls and whyThe aerodynamic-load gain is 0.25 with an indicated-speed reference of 240 KIAS. The hydraulic-load factor of 0.35 scales that modeled term; it is a selected artificial-feel approximation. |
| Force tuning speed/reference | Starting value240 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Spring response reference speed | Starting value65 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Aileron force scale | Starting value0.72 | What it controls and whyRoll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value1 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Trim feel | Starting valueDisabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueDisabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
All 44 starting settings and their rationale
The settings define the profile’s effect balance. Device output limits affect physical hand force.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0.74 | What it controls and whyThis profile uses powered-control feel for Martin P6M-2 SeaMaster. The baseline spring is 0.74. Low-speed spring blending is off. |
| Spring deadband | Starting value0.04 | What it controls and whySets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Profile force gain | Starting value0.25 | What it controls and whyThe aerodynamic-load gain is 0.25 with an indicated-speed reference of 240 KIAS. The hydraulic-load factor of 0.35 scales that modeled term; it is a selected artificial-feel approximation. |
| Master force gain | Starting value0.85 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| QBlend Enabled | Starting valueDisabled | What it controls and whyAllows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| QSpring Minimum Factor | Starting value0.55 | What it controls and whySets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| QSpring Start Knots | Starting value8 kt | What it controls and whySets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring response reference speed | Starting value65 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Force tuning speed/reference | Starting value240 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening gain | Starting value0 | What it controls and whyThe high-speed spring-stiffening gain is 0. No additional speed-driven stiffening is added; this does not disable independent aerodynamic loading. |
| Airspeed spring stiffening limit | Starting value5 | What it controls and whyLimits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | Starting value0.72 | What it controls and whyRoll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value1 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
| Trim feel | Starting valueDisabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueDisabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Elevator Authority | Starting value0 | What it controls and whyThe profile uses the trim behaviour configured below. Pitch relief is off, with stored authority 0; roll authority is 0. |
| Aileron Authority | Starting value0 | What it controls and whyScales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| Force Trim Enabled | Starting valueDisabled | What it controls and whyEnables local force trim, separate from aircraft-owned trim and add-on integration qualification. |
| GLoad Enabled | Starting valueEnabled | What it controls and whyAllows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| Rate Damping Enabled | Starting valueEnabled | What it controls and whyEnables rate damping with the configured coefficients and control law. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot follow authority | Starting value0.1 | What it controls and whySets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot neutral hold strength | Starting value0.6 | What it controls and whySets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Gain | Starting value0 | What it controls and whySets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Gain | Starting value0 | What it controls and whySets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Gain | Starting value0 | What it controls and whySets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Maximum flap index | Starting value3 | What it controls and whySets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Minimum flap index | Starting value2 | What it controls and whySets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Gain | Starting value0 | What it controls and whySets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Shaker Enabled | Starting valueDisabled | What it controls and whyPermits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Stick shaker amplitude | Starting value0.5 | What it controls and whySets triggered shaker strength; inactive while the shaker feature is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables ground effects; each still needs its own strength and contact or motion telemetry. |
| Gain | Starting value0 | What it controls and whySets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Gain | Starting value0 | What it controls and whySets gear-bump texture during ground motion, separate from touchdown impact. |
| Gain | Starting value0.32 | What it controls and whySets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Gain | Starting value0 | What it controls and whySets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Enabled | Starting valueDisabled | What it controls and whyEnables engine cues with nonzero settings and valid running-engine telemetry. |
| Gain | Starting value0 | What it controls and whySets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Enabled | Starting valueEnabled | What it controls and whyEnables accessory cues with configured strengths and observed accessory movement. |
| Gain | Starting value0.12 | What it controls and whySets texture from observed flap movement; a command without movement does not establish the cue. |
| Gain | Starting value0 | What it controls and whySets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Limits and open questions
- Conservative fixed jet-control feel estimate. The developer manual does not quantify the actual powered-control/feel linkage; no measured claim or pressure-failure force.
- Pitch and roll controls are documented but no calibrated simulator-neutral relationship is established; automatic neutral shift off.
- Convenience autopilot modes are documented, but no calibrated servo demand is published. AP-follow and neutral hold remain disabled.
- Read-only motion and accessory telemetry. No guessed custom servo outputs, input compensation or hardware writes outside the production Armed force path. Installed identity remains unobserved. Cradle parking brake and AP quick release do not create brake force. Conflicting approach-speed guidance is retained as context only.
- 240 KIAS is an estimated control-feel reference, not cruise TAS, V-speeds or an operating limit.
- Spring 0.74, lateral scale 0.7, trim relief 0/0; editable estimates, not measured hand forces.
- Physical and installed-aircraft checks are deferred. Save this profile as the aircraft default if telemetry omits its developer or configuration.
- Only actual accessory-position changes drive movement textures. No pressure-dependent failures, guessed servo outputs or input compensation.
Physical validation
No physical force validation is recorded in this public catalogue for this revision. Documentary review and software checks do not establish how a particular device feels.
Discuss this aircraft (0)
Questions, observations and useful sources from the community.
No published discussions yet. Bring a question or share a useful source.
Open aircraft discussions →Content expanded · What’s new
Something missing or a source that needs attention?
Suggest a correction ↗