Start here
A few places to begin, from the aircraft’s story to the people who fly it.
Meet the aircraft
The Piper PA-30 Twin Comanche is a twin-engine light aircraft.
Piper PA-30 Twin Comanche
www.vflyteair.com · Read more ↗Meet Piper PA-30 Twin Comanche
The Piper PA-30 Twin Comanche is a twin-engine light aircraft.
Piper PA-30 Twin Comanche
Piper → · Explore the family →
Piper PA-30 Twin Comanche
www.vflyteair.com · Piper PA-30 Twin Comanche — aircraft background ↗Aircraft type designators
No type designator selected for this reference.
History & design
A light twin and a long modification history
The Twin Comanche became a platform for substantial owner upgrades as well as ordinary touring. AOPA compared the standard aircraft with a comprehensively rebuilt Bailey Bullet in 1998, illustrating how far avionics, interiors and equipment can move from the original aeroplane. The baseline dimensions here are explicitly the standard PA-30 figures.
AOPA · The Ultimate Twin Comanche, May 1998 ↗Standard 1963 PA-30 figures, distinguished from the modified Bailey Bullet flown in the article.
Systems & details
Read the panel as well as the airframe name
A rebuilt example may have quite different avionics and workload from a period aircraft. This distinction matters in the simulator too: equipment claims for a modified Twin Comanche cannot automatically describe the original analog panel. The PA-30 and later counter-rotating PA-39 also need separate scope.
The Bullet’s electrical conversion
AOPA’s 1998 account describes a substantial systems conversion in the Bailey Bullet. Electric heating replaced the original fuel-fired Janitrol heater, while electrically powered gyros replaced vacuum-driven instruments. The upgraded panel included backup attitude equipment, a Century 2000 autopilot and electronic attitude and navigation displays. This is a description of that refurbishment project: a standard PA-30, or a simulator recreation of an earlier panel, should not be assumed to have the same equipment or electrical demands.
In your simulator
Systems, equipment and documentation for each developer’s aircraft.
Compare simulator versions →MSFS 2020 · MSFS 2024PA-30 Twin Comanche
vFlyteAir · Released
PA-30 Twin Comanche
vFlyteAir · Released
X-Plane 12Piper Twin Comanche PA30
vFlyteAir · Released
Piper Twin Comanche PA30
vFlyteAir · Released
Manuals & resources
Find your next read
Choose a topic for a short introduction and a link to the original source. Simulator references identify the developer and edition they cover.
Manufacturer, developer or authorized-product aircraft context
Piper PA-30 Twin Comanche — aircraft backgroundPiper PA-30 Twin Comanche
Background on the Piper PA-30 Twin Comanche light twin.
Aircraft-context passage, preserved text line 11; reviewed 2026-09-29
www.vflyteair.com · Read the source ↗Developer documentation
PA-30 Twin Comanche — product listingPA-30 Twin Comanche · MSFS 2020 · MSFS 2024
Individual product listing and edition passage reviewed 2026-09-29
www.vflyteair.com · Read the source ↗Piper Twin Comanche PA30 — product listingPiper Twin Comanche PA30 · X-Plane 12
Individual product listing and edition passage reviewed 2026-09-29
store.x-plane.org · Read the source ↗Read the original documentation from the people who created it. Manuals open on their publisher’s website.
Manufacturer, developer or authorized-product aircraft context
Piper PA-30 Twin Comanche — aircraft backgroundwww.vflyteair.com · Aircraft-context passage, preserved text line 11; reviewed 2026-09-29Product
Piper Twin Comanche PA30store.x-plane.org · Individual product listing and edition passage reviewed 2026-09-29Aircraft documentation
The Ultimate Twin Comanche, May 1998AOPA · Standard 1963 PA-30 figures, distinguished from the modified Bailey Bullet flown in the article.Built-in force-feedback profiles
Read the documentary basis, editable starting settings and remaining questions for the aircraft you fly. Each explanation refers to the exact profile revision shown.
Catalogue programme-20261022-v1 · 5 profile choices
Shrike / Blackbird PA-30 Twin Comanche
Shrike / Blackbird · Free and Pro · Revision 2 · Inherited starting point
MSFS 2020 · MSFS 2024
The Piper PA-30 Twin Comanche is a twin-engine light aircraft.
vFlyteAir PA30 Twin Comanche MSFS GNS
vFlyteAir · Free and Pro · Revision 1 · Inherited starting point
MSFS 2020 · MSFS 2024
The Piper PA-30 Twin Comanche is a twin-engine light aircraft.
vFlyteAir PA30 Twin Comanche MSFS TDS
vFlyteAir · Free and Pro · Revision 1 · Inherited starting point
MSFS 2020 · MSFS 2024
The Piper PA-30 Twin Comanche is a twin-engine light aircraft.
vFlyteAir Twin Comanche PA-30
vFlyteAir · Free and Pro · Revision 3 · Inherited starting point
X-Plane 12
The Piper PA-30 Twin Comanche is a twin-engine light aircraft.
Piper PA-30 Twin Comanche
Free and Pro · Revision 1 · Partial review
MSFS 2020 · MSFS 2024 · X-Plane 12
The Piper PA-30 Twin Comanche is a twin-engine light aircraft.
Shrike / Blackbird PA-30 Twin Comanche
The Piper PA-30 Twin Comanche is a twin-engine light aircraft.
Aircraft and simulator scope
- Shrike / Blackbird PA-30 Twin Comanche · Shrike / Blackbird · MSFS 2020 · Add-on starting point
- Shrike / Blackbird PA-30 Twin Comanche · Shrike / Blackbird · MSFS 2024 · Add-on starting point
The simulator model and controls
Shrike / Blackbird PA-30 Twin Comanche is the selected Shrike / Blackbird configuration.
How this profile feels
Spring resistance builds with the selected airspeed response. A separate aerodynamic term adds speed-dependent control load.
Valid trim provides the configured pressure relief. Autopilot following is off.
Aircraft and configuration
The Piper PA-30 Twin Comanche is a twin-engine light aircraft.
About the values
Strengths are normalized hardware-feel settings. They set the effect balance; hand force depends on the device and its limits. The IAS reference is a tuning value.
Documentary review and sources
These decisions describe the documentary basis and remaining gaps for this revision. Aircraft documentation and a starting setting describe different kinds of evidence.
Aircraft and variant
InheritedShrike / Blackbird PA-30 Twin Comanche is the selected Shrike / Blackbird configuration.
Flight controls
InheritedThe Piper PA-30 Twin Comanche is a twin-engine light aircraft.
Trim
InheritedThe profile uses the trim behaviour configured below. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.
Autopilot and stability
InheritedAutopilot following is off; the configured spring and load retain the hardware feel.
Equipment
InheritedThe Piper PA-30 Twin Comanche is a twin-engine light aircraft.
Speeds and limits
InheritedThe indicated-speed references set the profile response scale; they are separate from aircraft operating limits.
Simulator integration
InheritedThe profile targets msfs2020, msfs2024. Add-on-specific controls use only the supported references configured by this profile.
Force-feedback settings
InheritedThe settings define the profile’s effect balance. Device output limits affect physical hand force.
Starting settings and their rationale
These configured values are starting estimates. The explanations describe what each setting controls; physical validation appears separately below.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0.74 | What it controls and whyThis profile uses reversible-control loading for Piper PA-30 Twin Comanche. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 65 KIAS. |
| Master force gain | Starting value0.85 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| Profile force gain | Starting value0.8 | What it controls and whyThe aerodynamic-load gain is 0.8 with an indicated-speed reference of 145 KIAS. This supplies speed-dependent loading alongside the spring. |
| Force tuning speed/reference | Starting value145 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Spring response reference speed | Starting value65 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Aileron force scale | Starting value0.72 | What it controls and whyRoll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value1 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Trim feel | Starting valueDisabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueEnabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
All 44 starting settings and their rationale
The settings define the profile’s effect balance. Device output limits affect physical hand force.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0.74 | What it controls and whyThis profile uses reversible-control loading for Piper PA-30 Twin Comanche. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 65 KIAS. |
| Spring deadband | Starting value0.04 | What it controls and whySets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Profile force gain | Starting value0.8 | What it controls and whyThe aerodynamic-load gain is 0.8 with an indicated-speed reference of 145 KIAS. This supplies speed-dependent loading alongside the spring. |
| Master force gain | Starting value0.85 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| QBlend Enabled | Starting valueEnabled | What it controls and whyAllows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| QSpring Minimum Factor | Starting value0.55 | What it controls and whySets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| QSpring Start Knots | Starting value8 kt | What it controls and whySets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring response reference speed | Starting value65 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Force tuning speed/reference | Starting value145 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening gain | Starting value0.15 | What it controls and whyThe high-speed spring-stiffening gain is 0.15. It strengthens the permitted spring response above 65 KIAS, with the squared-speed ratio capped at 5. |
| Airspeed spring stiffening limit | Starting value5 | What it controls and whyLimits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | Starting value0.72 | What it controls and whyRoll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value1 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
| Trim feel | Starting valueDisabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueEnabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Elevator Authority | Starting value0.3 | What it controls and whyThe profile uses the trim behaviour configured below. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0. |
| Aileron Authority | Starting value0 | What it controls and whyScales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| Force Trim Enabled | Starting valueDisabled | What it controls and whyEnables local force trim, separate from aircraft-owned trim and add-on integration qualification. |
| GLoad Enabled | Starting valueEnabled | What it controls and whyAllows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| Rate Damping Enabled | Starting valueEnabled | What it controls and whyEnables rate damping with the configured coefficients and control law. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot follow authority | Starting value0.1 | What it controls and whySets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot neutral hold strength | Starting value0.6 | What it controls and whySets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Gain | Starting value0.35 | What it controls and whySets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Gain | Starting value0 | What it controls and whySets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Gain | Starting value0 | What it controls and whySets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Maximum flap index | Starting value3 | What it controls and whySets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Minimum flap index | Starting value2 | What it controls and whySets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Gain | Starting value0 | What it controls and whySets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Shaker Enabled | Starting valueDisabled | What it controls and whyPermits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Stick shaker amplitude | Starting value0.5 | What it controls and whySets triggered shaker strength; inactive while the shaker feature is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables ground effects; each still needs its own strength and contact or motion telemetry. |
| Gain | Starting value0.4 | What it controls and whySets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Gain | Starting value0.25 | What it controls and whySets gear-bump texture during ground motion, separate from touchdown impact. |
| Gain | Starting value0.65 | What it controls and whySets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Gain | Starting value0 | What it controls and whySets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Enabled | Starting valueEnabled | What it controls and whyEnables engine cues with nonzero settings and valid running-engine telemetry. |
| Gain | Starting value0.12 | What it controls and whySets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Enabled | Starting valueEnabled | What it controls and whyEnables accessory cues with configured strengths and observed accessory movement. |
| Gain | Starting value0.12 | What it controls and whySets texture from observed flap movement; a command without movement does not establish the cue. |
| Gain | Starting value0.025 | What it controls and whySets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Limits and open questions
- Manual light-twin stabilator yoke with estimated airspeed loading; use the PA30 architecture, not A2A single-Comanche dynamic variables.
- Estimated pitch-only stabilator/anti-servo trim relief. No operational roll-trim actuator inferred from generic simulator trim axes.
- The Shrike analog installation has no qualified servo contract. Other PA30 products use different avionics; follow and neutral hold remain off.
- Exact Shrike/Blackbird developer identity required for automatic matching. Generic standard trim is an estimate; no proprietary variable writes.
- 145 KIAS is an estimated control-feel reference, not cruise TAS, V-speeds or an operating limit.
- Spring 0.74, lateral scale 0.72, trim relief 0.22/0; editable estimates, not measured hand forces.
- Physical and installed-aircraft checks are deferred. Save this profile as the aircraft default if telemetry omits its developer or configuration.
- Only actual accessory-position changes drive movement textures. No pressure-dependent failures, guessed servo outputs or input compensation.
Physical validation
No physical force validation is recorded in this public catalogue for this revision. Documentary review and software checks do not establish how a particular device feels.
Discuss this aircraft (0)
Questions, observations and useful sources from the community.
No published discussions yet. Bring a question or share a useful source.
Open aircraft discussions →Content expanded · What’s new
Something missing or a source that needs attention?
Suggest a correction ↗