Start here
A few places to begin, from the aircraft’s story to the people who fly it.
Aircraft and simulator background
The Navion configurations described by Hangar Studios 713 include hydraulic landing gear and flaps, with an emergency hand pump in the cockpit. A pitch-trim wheel, flap selector and gear handle give each system its own control.
Ryan Navion
Hangar Studios 713 via Orbx · Read more ↗Hydraulics and cockpit controls
The Navion B manual identifies a pitch-trim wheel, flap selector, gear handle and emergency hydraulic hand pump. Gear-position lights indicate the resulting state. They are separate from the controls that operate the hydraulic system.
Ryan Navion
Hangar Studios 713 via Orbx · Read more ↗The L-17 variants
The L-17B manual specifies a 205 hp O-470-7 with hydraulic flaps and retractable landing gear. Its L-17D ski configuration has inoperative gear and indicators, and version 1.0.1 removed the gear-lever function. The manual's aileron-trim label remains unresolved against its elevator-trim references.
Ryan Navion
Hangar Studios 713 via Orbx · Read more ↗Meet Ryan Navion
The Navion configurations described by Hangar Studios 713 include hydraulic landing gear and flaps, with an emergency hand pump in the cockpit. A pitch-trim wheel, flap selector and gear handle give each system its own control.
The Super 260 rendition uses a 260 hp Continental IO-520 and KAP140 autopilot. The L-17B uses the 205 hp O-470-7; its included L-17D ski version has an inoperative gear system. These engine and undercarriage differences distinguish the package's represented variants.
Ryan Navion
North American / Ryan → · Explore the family →
Ryan Navion
Hangar Studios 713 via Orbx · Navion B developer manual ↗Aircraft type designators
No type designator selected for this reference.
History & design
Civil origins and military adoption
North American’s civil NA-154 Navion first flew in 1946. The Army Air Forces ordered eighty-three military versions as the L-17A, adapting a touring aeroplane to liaison, reconnaissance and light transport work.
National Museum of the United States Air Force · North American L-17A Navion ↗National Museum of the USAF: North American L-17A
Ryan continues the line
Ryan acquired the design and manufacturing rights and built 164 improved L-17Bs for the Air Force. Thirty-five earlier L-17As were subsequently converted to L-17C standard with better brakes and more fuel capacity; some served briefly as forward air-control aircraft in Korea.
National Museum of the United States Air Force · North American L-17A Navion ↗National Museum of the USAF: North American L-17A
Names and markings tell different stories
The military L-17s were redesignated U-18s in 1962. The museum’s surviving L-17A wears markings representing a Ryan-built L-17B used by Bradley University’s Air Force ROTC programme, so its painted identity is distinct from its underlying airframe model.
National Museum of the United States Air Force · North American L-17A Navion ↗National Museum of the USAF: North American L-17A
Systems & details
Hydraulics and cockpit controls
The Navion B manual identifies a pitch-trim wheel, flap selector, gear handle and emergency hydraulic hand pump. Gear-position lights indicate the resulting state. They are separate from the controls that operate the hydraulic system.
The L-17 variants
The L-17B manual specifies a 205 hp O-470-7 with hydraulic flaps and retractable landing gear. Its L-17D ski configuration has inoperative gear and indicators, and version 1.0.1 removed the gear-lever function. The manual's aileron-trim label remains unresolved against its elevator-trim references.
In your simulator
Systems, equipment and documentation for each developer’s aircraft.
Compare simulator versions →Manuals & resources
Find your next read
Choose a topic for a short introduction and a link to the original source. Simulator references identify the developer and edition they cover.
Developer manual
Developer Navion manualRyan Navion
Developer manual PDF6-7/16/21/34/38
Hangar Studios 713 via Orbx · Read the source ↗Navion B developer manualRyan Navion
Developer manual PDF7-9 visual cockpit labels
Hangar Studios 713 via Orbx · Read the source ↗Developer documentation
Ryan Navion B "Super 260"Ryan Navion
Current product engine, hydraulics and avionics
Hangar Studios 713 · Read the source ↗North American Ryan Navion L-17BRyan Navion
Current product edition banner
Hangar Studios 713 · Read the source ↗Read the original documentation from the people who created it. Manuals open on their publisher’s website.
Developer manual
Developer Navion manualHangar Studios 713 via Orbx · Developer manual PDF6-7/16/21/34/38 Navion B developer manualHangar Studios 713 via Orbx · Developer manual PDF7-9 visual cockpit labelsDeveloper documentation
Ryan Navion B "Super 260"Hangar Studios 713 · Current product engine, hydraulics and avionics North American Ryan Navion L-17BHangar Studios 713 · Current product edition bannerAircraft history
North American L-17A NavionNational Museum of the United States Air Force · National Museum of the USAF: North American L-17ABuilt-in force-feedback profiles
Read the documentary basis, editable starting settings and remaining questions for the aircraft you fly. Each explanation refers to the exact profile revision shown.
Catalogue programme-20261011-v3 · 4 profile choices
Hangar Studios 713 Ryan Navion B Super 260
Hangar Studios 713 · Free and Pro · Revision 2 · Inherited starting point
MSFS 2020 · MSFS 2024
A Navion family represented with hydraulic gear and flaps, military variants and a 260 hp civilian rendition.
Hangar Studios 713 Ryan Navion L-17B
Hangar Studios 713 · Free and Pro · Revision 2 · Inherited starting point
MSFS 2020 · MSFS 2024
A Navion family represented with hydraulic gear and flaps, military variants and a 260 hp civilian rendition.
Hangar Studios 713 Ryan Navion L-17D Skis
Hangar Studios 713 · Free and Pro · Revision 2 · Inherited starting point
MSFS 2020 · MSFS 2024
A Navion family represented with hydraulic gear and flaps, military variants and a 260 hp civilian rendition.
Ryan Navion B Super 260
Free and Pro · Revision 1 · Partial review
MSFS 2020 · MSFS 2024 · X-Plane 12
A Navion family represented with hydraulic gear and flaps, military variants and a 260 hp civilian rendition.
Hangar Studios 713 Ryan Navion L-17B
A Navion family represented with hydraulic gear and flaps, military variants and a 260 hp civilian rendition.
Aircraft and simulator scope
- Hangar Studios 713 Ryan Navion L-17B · Hangar Studios 713 · MSFS 2020 · Add-on starting point
- Hangar Studios 713 Ryan Navion L-17B · Hangar Studios 713 · MSFS 2024 · Add-on starting point
The simulator model and controls
Hangar Studios 713 Ryan Navion L-17B is the selected Hangar Studios 713 configuration.
How this profile feels
Spring resistance builds with the selected airspeed response. A separate aerodynamic term adds speed-dependent control load.
Valid trim provides the configured pressure relief. Autopilot following is off.
Aircraft and configuration
The Navion configurations described by Hangar Studios 713 include hydraulic landing gear and flaps, with an emergency hand pump in the cockpit. A pitch-trim wheel, flap selector and gear handle give each system its own control.
Hydraulics and cockpit controls
The Navion B manual identifies a pitch-trim wheel, flap selector, gear handle and emergency hydraulic hand pump. Gear-position lights indicate the resulting state. They are separate from the controls that operate the hydraulic system.
The L-17 variants
The L-17B manual specifies a 205 hp O-470-7 with hydraulic flaps and retractable landing gear. Its L-17D ski configuration has inoperative gear and indicators, and version 1.0.1 removed the gear-lever function. The manual's aileron-trim label remains unresolved against its elevator-trim references.
About the values
Strengths are normalized hardware-feel settings. They set the effect balance; hand force depends on the device and its limits. The IAS reference is a tuning value.
Documentary review and sources
These decisions describe the documentary basis and remaining gaps for this revision. Aircraft documentation and a starting setting describe different kinds of evidence.
Aircraft and variant
InheritedHangar Studios 713 Ryan Navion L-17B is the selected Hangar Studios 713 configuration.
Flight controls
InheritedA Navion family represented with hydraulic gear and flaps, military variants and a 260 hp civilian rendition.
Trim
InheritedThe Navion B manual identifies a pitch-trim wheel, flap selector, gear handle and emergency hydraulic hand pump. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.
Autopilot and stability
InheritedAutopilot following is off; the configured spring and load retain the hardware feel.
Equipment
InheritedThe Navion configurations described by Hangar Studios 713 include hydraulic landing gear and flaps, with an emergency hand pump in the cockpit. A pitch-trim wheel, flap selector and gear handle give each system its own control.
Speeds and limits
InheritedThe indicated-speed references set the profile response scale; they are separate from aircraft operating limits.
Simulator integration
InheritedThe profile targets msfs2020, msfs2024. Add-on-specific controls use only the supported references configured by this profile.
Force-feedback settings
InheritedThe settings define the profile’s effect balance. Device output limits affect physical hand force.
Starting settings and their rationale
These configured values are starting estimates. The explanations describe what each setting controls; physical validation appears separately below.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0.74 | What it controls and whyThe Navion B manual identifies a pitch-trim wheel, flap selector, gear handle and emergency hydraulic hand pump. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 50 KIAS. |
| Master force gain | Starting value0.85 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| Profile force gain | Starting value0.8 | What it controls and whyThe aerodynamic-load gain is 0.8 with an indicated-speed reference of 115 KIAS. This supplies speed-dependent loading alongside the spring. |
| Force tuning speed/reference | Starting value115 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Spring response reference speed | Starting value50 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Aileron force scale | Starting value0.72 | What it controls and whyRoll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value1.0 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Trim feel | Starting valueDisabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueEnabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
All 44 starting settings and their rationale
The settings define the profile’s effect balance. Device output limits affect physical hand force.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0.74 | What it controls and whyThe Navion B manual identifies a pitch-trim wheel, flap selector, gear handle and emergency hydraulic hand pump. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 50 KIAS. |
| Spring deadband | Starting value0.04 | What it controls and whySets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Profile force gain | Starting value0.8 | What it controls and whyThe aerodynamic-load gain is 0.8 with an indicated-speed reference of 115 KIAS. This supplies speed-dependent loading alongside the spring. |
| Master force gain | Starting value0.85 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| QBlend Enabled | Starting valueEnabled | What it controls and whyAllows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| QSpring Minimum Factor | Starting value0.55 | What it controls and whySets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| QSpring Start Knots | Starting value8 kt | What it controls and whySets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring response reference speed | Starting value50 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Force tuning speed/reference | Starting value115 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening gain | Starting value0.15 | What it controls and whyThe high-speed spring-stiffening gain is 0.15. It strengthens the permitted spring response above 50 KIAS, with the squared-speed ratio capped at 5. |
| Airspeed spring stiffening limit | Starting value5 | What it controls and whyLimits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | Starting value0.72 | What it controls and whyRoll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value1.0 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
| Trim feel | Starting valueDisabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueEnabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Elevator Authority | Starting value0.3 | What it controls and whyThe Navion B manual identifies a pitch-trim wheel, flap selector, gear handle and emergency hydraulic hand pump. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0. |
| Aileron Authority | Starting value0 | What it controls and whyScales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| Force Trim Enabled | Starting valueDisabled | What it controls and whyEnables local force trim, separate from aircraft-owned trim and add-on integration qualification. |
| GLoad Enabled | Starting valueEnabled | What it controls and whyAllows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| Rate Damping Enabled | Starting valueEnabled | What it controls and whyEnables rate damping with the configured coefficients and control law. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot follow authority | Starting value0.1 | What it controls and whySets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot neutral hold strength | Starting value0.6 | What it controls and whySets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Gain | Starting value0.35 | What it controls and whySets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Gain | Starting value0 | What it controls and whySets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Gain | Starting value0 | What it controls and whySets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Maximum flap index | Starting value3 | What it controls and whySets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Minimum flap index | Starting value2 | What it controls and whySets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Gain | Starting value0 | What it controls and whySets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Shaker Enabled | Starting valueDisabled | What it controls and whyPermits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Stick shaker amplitude | Starting value0.5 | What it controls and whySets triggered shaker strength; inactive while the shaker feature is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables ground effects; each still needs its own strength and contact or motion telemetry. |
| Gain | Starting value0.4 | What it controls and whySets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Gain | Starting value0.25 | What it controls and whySets gear-bump texture during ground motion, separate from touchdown impact. |
| Gain | Starting value0.65 | What it controls and whySets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Gain | Starting value0 | What it controls and whySets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Enabled | Starting valueEnabled | What it controls and whyEnables engine cues with nonzero settings and valid running-engine telemetry. |
| Gain | Starting value0.12 | What it controls and whySets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Enabled | Starting valueEnabled | What it controls and whyEnables accessory cues with configured strengths and observed accessory movement. |
| Gain | Starting value0.12 | What it controls and whySets texture from observed flap movement; a command without movement does not establish the cue. |
| Gain | Starting value0.025 | What it controls and whySets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Limits and open questions
- L17D historical engine variants not transferred into package without current evidence. Historical MPH restrictions vary with weight and are not new VNE overrides. Exact pitch linkage remains unqualified.
- Estimated forces; installed-aircraft and physical acceptance deferred.
- No qualified AP servo, failure, control-lock or dynamic fit detection. Select and save the exact profile as aircraft default when telemetry omits developer or configuration.
Physical validation
No physical force validation is recorded in this public catalogue for this revision. Documentary review and software checks do not establish how a particular device feels.
Discuss this aircraft (0)
Questions, observations and useful sources from the community.
No published discussions yet. Bring a question or share a useful source.
Open aircraft discussions →Content expanded · What’s new
Something missing or a source that needs attention?
Suggest a correction ↗
