Start here
A few places to begin, from the aircraft’s story to the people who fly it.
Meet the aircraft
The Boeing 247 was an all-metal, low-wing airliner with retractable landing gear. The Smithsonian identifies the 247-D as a later version that introduced controllable-pitch propellers and wing de-icer boots; its preserved example also flew in the 1934 MacRobertson Race.
Boeing 247-D
Smithsonian National Air and Space Museum · Read more ↗Meet Boeing 247-D
The Boeing 247 was an all-metal, low-wing airliner with retractable landing gear. The Smithsonian identifies the 247-D as a later version that introduced controllable-pitch propellers and wing de-icer boots; its preserved example also flew in the 1934 MacRobertson Race.
Boeing 247-D
Aircraft type designators
No type designator selected for this reference.
History & design
A new airline layout in 1933
The Boeing 247 entered United service in 1933 with all-metal construction, a low wing, retractable gear and supercharged engines. It helped establish the configuration of a new generation of airline transports.
Smithsonian National Air and Space Museum · Boeing 247-D collection record ↗Museum type history
An airliner in a long-distance race
Roscoe Turner and Clyde Pangborn flew the museum’s first-production 247-D in the 1934 MacRobertson race to Australia, finishing third overall. It then returned to United’s regular service.
Smithsonian National Air and Space Museum · Boeing 247-D collection record ↗Museum history of its own airframe
From race aircraft to experimental transport
After the MacRobertson Race, the museum’s 247-D returned to United service. The Smithsonian records its sale in 1937 for use as an executive transport, followed by a 1939 transfer to the Department of Commerce Air Safety Board. Fourteen years of experimental work earned it the nickname Adaptable Annie before its 1953 museum donation. Its display combines racing markings on one side with United markings on the other, reflecting two stages of that working life.
Smithsonian National Air and Space Museum · Boeing 247-D collection record ↗Smithsonian history of the preserved 247-D
Systems & details
The D model adds useful distinctions
The 247-D introduced controllable-pitch propellers and wing de-icing boots. These are model-specific systems to look for in the chosen simulator. Propeller, icing and landing-gear cues should follow that implementation’s telemetry; the museum specification does not calibrate their joystick amplitudes.
In your simulator
Systems, equipment and documentation for each developer’s aircraft.
MSFS 2020Boeing 247D
Wing42 · Released
Boeing 247D
Wing42 · Released
Manuals & resources
Find your next read
Choose a topic for a short introduction and a link to the original source. Simulator references identify the developer and edition they cover.
manufacturer, operator, museum or archive primary source
Boeing 247-D | National Air and Space MuseumBoeing 247-D
The Smithsonian describes the 247-D's controllable-pitch propellers, wing de-icer boots and 1934 MacRobertson Race flight.
Variant-specific Smithsonian collection record.
Smithsonian National Air and Space Museum · Read the source ↗Developer documentation
Boeing 247D — product listingBoeing 247D · MSFS 2020
Product listing captured 2026-09-30; edition scope from the reviewed catalogue
Wing42 · Read the source ↗Read the original documentation from the people who created it. Manuals open on their publisher’s website.
manufacturer, operator, museum or archive primary source
Boeing 247-D | National Air and Space MuseumSmithsonian National Air and Space Museum · Variant-specific Smithsonian collection record.Product
The Wing42 Boeing 247 – Wing42Wing42 · Product listing captured 2026-09-30; edition scope from the reviewed catalogueBuilt-in force-feedback profiles
Read the documentary basis, editable starting settings and remaining questions for the aircraft you fly. Each explanation refers to the exact profile revision shown.
Catalogue programme-20261022-v1 · 2 profile choices
Wing42 Boeing 247D
Wing42 · Free and Pro · Revision 2 · Inherited starting point
MSFS 2020
A 1930s airliner variant with controllable-pitch propellers and wing de-icer boots.
Boeing 247D
Free and Pro · Revision 1 · Partial review
MSFS 2020 · MSFS 2024 · X-Plane 12
A 1930s airliner variant with controllable-pitch propellers and wing de-icer boots.
Wing42 Boeing 247D
A 1930s airliner variant with controllable-pitch propellers and wing de-icer boots.
Aircraft and simulator scope
- Wing42 Boeing 247D · Wing42 · MSFS 2020 · Add-on starting point
The simulator model and controls
Wing42 Boeing 247D is the selected Wing42 configuration.
How this profile feels
Spring resistance builds with the selected airspeed response. A separate aerodynamic term adds speed-dependent control load.
Valid trim provides the configured pressure relief. Autopilot following is off.
Aircraft and configuration
The Boeing 247 was an all-metal, low-wing airliner with retractable landing gear. The Smithsonian identifies the 247-D as a later version that introduced controllable-pitch propellers and wing de-icer boots; its preserved example also flew in the 1934 MacRobertson Race.
About the values
Strengths are normalized hardware-feel settings. They set the effect balance; hand force depends on the device and its limits. The IAS reference is a tuning value.
Documentary review and sources
These decisions describe the documentary basis and remaining gaps for this revision. Aircraft documentation and a starting setting describe different kinds of evidence.
Aircraft and variant
InheritedWing42 Boeing 247D is the selected Wing42 configuration.
Flight controls
InheritedA 1930s airliner variant with controllable-pitch propellers and wing de-icer boots.
Trim
InheritedThe profile uses the trim behaviour configured below. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.16.
Autopilot and stability
InheritedAutopilot following is off; the configured spring and load retain the hardware feel.
Equipment
InheritedThe Boeing 247 was an all-metal, low-wing airliner with retractable landing gear. The Smithsonian identifies the 247-D as a later version that introduced controllable-pitch propellers and wing de-icer boots; its preserved example also flew in the 1934 MacRobertson Race.
Speeds and limits
InheritedThe indicated-speed references set the profile response scale; they are separate from aircraft operating limits.
Simulator integration
InheritedThe profile targets msfs2020. Add-on-specific controls use only the supported references configured by this profile.
Force-feedback settings
InheritedThe settings define the profile’s effect balance. Device output limits affect physical hand force.
Starting settings and their rationale
These configured values are starting estimates. The explanations describe what each setting controls; physical validation appears separately below.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0.74 | What it controls and whyThis profile uses reversible-control loading for Boeing 247-D. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 45 KIAS. |
| Master force gain | Starting value0.85 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| Profile force gain | Starting value0.8 | What it controls and whyThe aerodynamic-load gain is 0.8 with an indicated-speed reference of 150 KIAS. This supplies speed-dependent loading alongside the spring. |
| Force tuning speed/reference | Starting value150 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Spring response reference speed | Starting value45 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Aileron force scale | Starting value0.72 | What it controls and whyRoll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value1.0 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Trim feel | Starting valueDisabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueEnabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
All 44 starting settings and their rationale
The settings define the profile’s effect balance. Device output limits affect physical hand force.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0.74 | What it controls and whyThis profile uses reversible-control loading for Boeing 247-D. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 45 KIAS. |
| Spring deadband | Starting value0.04 | What it controls and whySets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Profile force gain | Starting value0.8 | What it controls and whyThe aerodynamic-load gain is 0.8 with an indicated-speed reference of 150 KIAS. This supplies speed-dependent loading alongside the spring. |
| Master force gain | Starting value0.85 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| QBlend Enabled | Starting valueEnabled | What it controls and whyAllows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| QSpring Minimum Factor | Starting value0.55 | What it controls and whySets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| QSpring Start Knots | Starting value10 kt | What it controls and whySets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring response reference speed | Starting value45 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Force tuning speed/reference | Starting value150 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening gain | Starting value0.15 | What it controls and whyThe high-speed spring-stiffening gain is 0.15. It strengthens the permitted spring response above 45 KIAS, with the squared-speed ratio capped at 5. |
| Airspeed spring stiffening limit | Starting value5 | What it controls and whyLimits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | Starting value0.72 | What it controls and whyRoll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value1.0 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
| Trim feel | Starting valueDisabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueEnabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Elevator Authority | Starting value0.3 | What it controls and whyThe profile uses the trim behaviour configured below. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.16. |
| Aileron Authority | Starting value0.16 | What it controls and whyScales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| Force Trim Enabled | Starting valueDisabled | What it controls and whyEnables local force trim, separate from aircraft-owned trim and add-on integration qualification. |
| GLoad Enabled | Starting valueEnabled | What it controls and whyAllows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| Rate Damping Enabled | Starting valueEnabled | What it controls and whyEnables rate damping with the configured coefficients and control law. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot follow authority | Starting value0.1 | What it controls and whySets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot neutral hold strength | Starting value0.6 | What it controls and whySets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Gain | Starting value0.35 | What it controls and whySets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Gain | Starting value0 | What it controls and whySets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Gain | Starting value0 | What it controls and whySets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Maximum flap index | Starting value3 | What it controls and whySets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Minimum flap index | Starting value2 | What it controls and whySets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Gain | Starting value0 | What it controls and whySets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Shaker Enabled | Starting valueDisabled | What it controls and whyPermits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Stick shaker amplitude | Starting value0.5 | What it controls and whySets triggered shaker strength; inactive while the shaker feature is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables ground effects; each still needs its own strength and contact or motion telemetry. |
| Gain | Starting value0.4 | What it controls and whySets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Gain | Starting value0.25 | What it controls and whySets gear-bump texture during ground motion, separate from touchdown impact. |
| Gain | Starting value0.65 | What it controls and whySets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Gain | Starting value0 | What it controls and whySets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Enabled | Starting valueEnabled | What it controls and whyEnables engine cues with nonzero settings and valid running-engine telemetry. |
| Gain | Starting value0.12 | What it controls and whySets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Enabled | Starting valueEnabled | What it controls and whyEnables accessory cues with configured strengths and observed accessory movement. |
| Gain | Starting value0 | What it controls and whySets texture from observed flap movement; a command without movement does not establish the cue. |
| Gain | Starting value0.025 | What it controls and whySets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Limits and open questions
- No autopilot is fitted. Custom Prop-o-Tronic failures are independent of MSFS default failures; no inferred failure-force events. Gear cue uses actual position changes, never lever state. Published mph figures are not KIAS force calibration.
- Physical and installed-aircraft acceptance deferred. Force values and indicated-speed reference are estimates.
- No unqualified AP following, dynamic configuration recognition, trim-actuator demand or add-on failure integration.
Physical validation
No physical force validation is recorded in this public catalogue for this revision. Documentary review and software checks do not establish how a particular device feels.
Discuss this aircraft (0)
Questions, observations and useful sources from the community.
No published discussions yet. Bring a question or share a useful source.
Open aircraft discussions →Content expanded · What’s new
Something missing or a source that needs attention?
Suggest a correction ↗