BOEING / AIRLINER

Boeing 247-D

A 1930s airliner variant with controllable-pitch propellers and wing de-icer boots.

+ Compare aircraft

Choose the version you fly to narrow the edition-specific reading.

Engines2 Pratt & Whitney Wasp S1H1-G, 550 hp each
Wingspan22.6 m
Length15.7 m
Gross weight6,192 kg
Empty weight4,055 kg
Top speed322 km/h
Simulator ecosystemsMSFS
YOUR AIRCRAFT COMPANION

Start here

A few places to begin, from the aircraft’s story to the people who fly it.

Aircraft history

Meet the aircraft

The Boeing 247 was an all-metal, low-wing airliner with retractable landing gear. The Smithsonian identifies the 247-D as a later version that introduced controllable-pitch propellers and wing de-icer boots; its preserved example also flew in the 1934 MacRobertson Race.

Boeing 247-D

Smithsonian National Air and Space Museum · Read more ↗
THE AIRCRAFT

Meet Boeing 247-D

The Boeing 247 was an all-metal, low-wing airliner with retractable landing gear. The Smithsonian identifies the 247-D as a later version that introduced controllable-pitch propellers and wing de-icer boots; its preserved example also flew in the 1934 MacRobertson Race.

FAMILY, MODELS & VARIANTS

Boeing 247-D

Boeing → · Explore the family →

Aircraft type designators

No type designator selected for this reference.

HOW IT CAME TO BE

History & design

From race aircraft to experimental transport

After the MacRobertson Race, the museum’s 247-D returned to United service. The Smithsonian records its sale in 1937 for use as an executive transport, followed by a 1939 transfer to the Department of Commerce Air Safety Board. Fourteen years of experimental work earned it the nickname Adaptable Annie before its 1953 museum donation. Its display combines racing markings on one side with United markings on the other, reflecting two stages of that working life.

Smithsonian National Air and Space Museum · Boeing 247-D collection record ↗

Smithsonian history of the preserved 247-D

UNDER THE SKIN

Systems & details

The D model adds useful distinctions

The 247-D introduced controllable-pitch propellers and wing de-icing boots. These are model-specific systems to look for in the chosen simulator. Propeller, icing and landing-gear cues should follow that implementation’s telemetry; the museum specification does not calibrate their joystick amplitudes.

Museum systems description; profile implication is editorial
Smithsonian National Air and Space Museum · Boeing 247-D collection record ↗
VIRTUAL VERSIONS

In your simulator

Systems, equipment and documentation for each developer’s aircraft.

MSFS 2020

Boeing 247D

Wing42 · Released

MSFS 2020Third-party add-on

Aircraft

Products and variants
ProductSimulatorProduct type
Boeing 247D ↗ReleasedMSFS 2020 Aircraft
GO TO THE SOURCE

Manuals & resources

Find your next read

Choose a topic for a short introduction and a link to the original source. Simulator references identify the developer and edition they cover.

manufacturer, operator, museum or archive primary source

Boeing 247-D | National Air and Space MuseumBoeing 247-D

The Smithsonian describes the 247-D's controllable-pitch propellers, wing de-icer boots and 1934 MacRobertson Race flight.

Variant-specific Smithsonian collection record.

Smithsonian National Air and Space Museum · Read the source ↗

Developer documentation

Boeing 247D — product listingBoeing 247D · MSFS 2020

Product listing captured 2026-09-30; edition scope from the reviewed catalogue

Wing42 · Read the source ↗

Read the original documentation from the people who created it. Manuals open on their publisher’s website.

manufacturer, operator, museum or archive primary source

↗Boeing 247-D | National Air and Space MuseumSmithsonian National Air and Space Museum · Variant-specific Smithsonian collection record.

Product

↗The Wing42 Boeing 247 – Wing42Wing42 · Product listing captured 2026-09-30; edition scope from the reviewed catalogue
AIRCRAFT AND FEEL

Built-in force-feedback profiles

Read the documentary basis, editable starting settings and remaining questions for the aircraft you fly. Each explanation refers to the exact profile revision shown.

Catalogue programme-20261022-v1 · 2 profile choices

FFB-BRIDGE BUILT-IN PROFILE

Boeing 247D

Free and ProRevision 1Partial review

A 1930s airliner variant with controllable-pitch propellers and wing de-icer boots.

Aircraft and simulator scope

  • Boeing 247D · MSFS 2020 · Variant starting point
  • Boeing 247D · MSFS 2024 · Variant starting point
  • Boeing 247D · X-Plane 12 · Variant starting point

Universal named airframe/configuration; intended MSFS2020/MSFS2024/XP12 starting point, not add-on or edition acceptance. · Physical facts and prior documentary review are reused from their archived dated sources; new market availability is not inferred.

The simulator model and controls

A 1930s airliner variant with controllable-pitch propellers and wing de-icer boots.

How this profile feels

Spring resistance builds with the selected airspeed response. A separate aerodynamic term adds speed-dependent control load.

Valid trim provides the configured pressure relief. Autopilot following is off.

Aircraft and configuration

Two Wasp radials with geared three-blade feathering propellers. Electric retractable mains use raise/neutral/lower positions and an emergency ratchet; the tailwheel is free-castering. No wing-flap system is documented in the selected manual.

About the values

Strengths are normalized hardware-feel settings. They set the effect balance; hand force depends on the device and its limits. The IAS reference is a tuning value.

What the documentation establishes

Boeing 247D: Two Wasp radials with geared three-blade feathering propellers. Electric retractable mains use raise/neutral/lower positions and an emergency ratchet; the tailwheel is free-castering. No wing-flap system is documented in the selected manual.

Documentary review and sources

These decisions describe the documentary basis and remaining gaps for this revision. Aircraft documentation and a starting setting describe different kinds of evidence.

Aircraft and variant
Reviewed

A 1930s airliner variant with controllable-pitch propellers and wing de-icer boots.

Flight controls
Inherited

A 1930s airliner variant with controllable-pitch propellers and wing de-icer boots.

Trim
Inherited

The profile uses the trim behaviour configured below. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.16.

Autopilot and stability
Reviewed

Autopilot following is off; the configured spring and load retain the hardware feel.

Equipment
Inherited

Two Wasp radials with geared three-blade feathering propellers. Electric retractable mains use raise/neutral/lower positions and an emergency ratchet; the tailwheel is free-castering. No wing-flap system is documented in the selected manual.

Speeds and limits
Inherited

The indicated-speed references set the profile response scale; they are separate from aircraft operating limits.

Simulator integration
Reviewed

The profile targets msfs2020, msfs2024, xplane12. Add-on-specific controls use only the supported references configured by this profile.

Force-feedback settings
Inherited

The settings define the profile’s effect balance. Device output limits affect physical hand force.

Starting settings and their rationale

These configured values are starting estimates. The explanations describe what each setting controls; physical validation appears separately below.

Estimated starting settings · revision 1
SettingStarting valueWhat it controls and why
Spring strengthStarting value0.74 What it controls and whyThis profile uses reversible-control loading for Boeing 247-D. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 45 KIAS.
Master force gainStarting value0.85 What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits.
Profile force gainStarting value0.8 What it controls and whyThe aerodynamic-load gain is 0.8 with an indicated-speed reference of 150 KIAS. This supplies speed-dependent loading alongside the spring.
Force tuning speed/referenceStarting value150 ktWhat it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Spring response reference speedStarting value45 ktWhat it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Aileron force scaleStarting value0.72 What it controls and whyRoll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.
Elevator force scaleStarting value1.0 What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Trim feelStarting valueDisabled What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
Trim reliefStarting valueEnabled What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
Autopilot followStarting valueDisabled What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel.
Autopilot neutral holdStarting valueDisabled What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target.
Output force limitStarting value0.55 What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate.
All 44 starting settings and their rationale

The settings define the profile’s effect balance. Device output limits affect physical hand force.

Estimated starting settings · revision 1
SettingStarting valueWhat it controls and why
Spring strengthStarting value0.74 What it controls and whyThis profile uses reversible-control loading for Boeing 247-D. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 45 KIAS.
Profile force gainStarting value0.8 What it controls and whyThe aerodynamic-load gain is 0.8 with an indicated-speed reference of 150 KIAS. This supplies speed-dependent loading alongside the spring.
Elevator force scaleStarting value1.0 What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Aileron force scaleStarting value0.72 What it controls and whyRoll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.
Output force limitStarting value0.55 What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate.

Boeing 247D: Pilot-adjustable elevator, aileron and rudder trim tabs relieve control pressure. Pitch and roll neutral relief use normalized simulator trim only. Estimated pitch/roll trim authorities 0.3/0.16; exact add-on sign, travel, units and build-specific neutral remain unqualified. Rudder trim never substitutes for roll trim.

Estimated starting settings · revision 1
SettingStarting valueWhat it controls and why
Elevator AuthorityStarting value0.3 What it controls and whyThe profile uses the trim behaviour configured below. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.16.
Aileron AuthorityStarting value0.16 What it controls and whyScales supported roll-trim relief and permitted centre movement. Zero removes roll response.

Boeing 247D: 150 KIAS is the retained estimated tuning reference. It is not published cruise TAS, VNE, a new flight limit or a measured force threshold. Source-specific operating quantities remain attached to their original configuration and conditions.

Estimated starting settings · revision 1
SettingStarting valueWhat it controls and why
Force tuning speed/referenceStarting value150 ktWhat it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.

Flap cues remain disabled. Engine and gear-motion scaling are estimates; the electrical gear system does not establish powered primary flight controls.

Estimated starting settings · revision 1
SettingStarting valueWhat it controls and why
GainStarting value0 What it controls and whyFlap cues remain disabled. Engine and gear-motion scaling are estimates; the electrical gear system does not establish powered primary flight controls.
GainStarting value0.025 What it controls and whyFlap cues remain disabled. Engine and gear-motion scaling are estimates; the electrical gear system does not establish powered primary flight controls.
GainStarting value0.12 What it controls and whyFlap cues remain disabled. Engine and gear-motion scaling are estimates; the electrical gear system does not establish powered primary flight controls.
GainStarting value0 What it controls and whyFlap cues remain disabled. Engine and gear-motion scaling are estimates; the electrical gear system does not establish powered primary flight controls.

Exact configured values with software explanations. Force magnitudes remain editable estimates; disabled features retain inactive values.

Estimated starting settings · revision 1
SettingStarting valueWhat it controls and why
Spring deadbandStarting value0.04 What it controls and whySets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Master force gainStarting value0.85 What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits.
QBlend EnabledStarting valueEnabled What it controls and whyAllows baseline spring strength to rise with indicated airspeed where the control law permits it.
QSpring Minimum FactorStarting value0.55 What it controls and whySets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
QSpring Start KnotsStarting value10 ktWhat it controls and whySets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
Spring response reference speedStarting value45 ktWhat it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Airspeed spring stiffening gainStarting value0.15 What it controls and whyThe high-speed spring-stiffening gain is 0.15. It strengthens the permitted spring response above 45 KIAS, with the squared-speed ratio capped at 5.
Airspeed spring stiffening limitStarting value5 What it controls and whyLimits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Trim feelStarting valueDisabled What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
Trim reliefStarting valueEnabled What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
Force Trim EnabledStarting valueDisabled What it controls and whyEnables local force trim, separate from aircraft-owned trim and add-on integration qualification.
GLoad EnabledStarting valueEnabled What it controls and whyAllows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
Rate Damping EnabledStarting valueEnabled What it controls and whyEnables rate damping with the configured coefficients and control law.
Autopilot followStarting valueDisabled What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel.
Autopilot follow authorityStarting value0.1 What it controls and whySets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Autopilot neutral holdStarting valueDisabled What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target.
Autopilot neutral hold strengthStarting value0.6 What it controls and whySets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
EnabledStarting valueEnabled What it controls and whyEnables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
GainStarting value0.35 What it controls and whySets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
GainStarting value0 What it controls and whySets high-Mach buffet strength; onset and full-strength thresholds are separate.
Maximum flap indexStarting value3 What it controls and whySets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Minimum flap indexStarting value2 What it controls and whySets the first flap detent that admits buffet; this is a handle index, not degrees.
GainStarting value0 What it controls and whySets gear aerodynamic buffet; movement and ground-contact cues are separate.
Shaker EnabledStarting valueDisabled What it controls and whyPermits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Stick shaker amplitudeStarting value0.5 What it controls and whySets triggered shaker strength; inactive while the shaker feature is disabled.
EnabledStarting valueEnabled What it controls and whyEnables ground effects; each still needs its own strength and contact or motion telemetry.
GainStarting value0.4 What it controls and whySets rolling texture strength, modified by speed, surface and undercarriage configuration.
GainStarting value0.25 What it controls and whySets gear-bump texture during ground motion, separate from touchdown impact.
GainStarting value0.65 What it controls and whySets landing-impact strength; landing telemetry and response shape determine the pulse.
GainStarting value0 What it controls and whySets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
EnabledStarting valueEnabled What it controls and whyEnables engine cues with nonzero settings and valid running-engine telemetry.
EnabledStarting valueEnabled What it controls and whyEnables accessory cues with configured strengths and observed accessory movement.
Limits and open questions
  • Boeing 247D is a universal starting point; exact add-on matching, edition operation and physical hand-force calibration remain unqualified.
  • Autopilot movement and unknown custom trim, failure or force-input signals are disabled. Confirm the selected equipment fit and trim direction for the implementation in use.
  • Force magnitudes and speed tuning are editable inherited estimates. Owner physical and installed-aircraft acceptance remain pending.

Physical validation

No physical force validation is recorded in this public catalogue for this revision. Documentary review and software checks do not establish how a particular device feels.

FFB-Bridge maintains this profile’s revisions and tuning discussion.

Revision 1 and download availability in FFB-Bridge ↗
Exact profile identity
Profile
airframe-boeing-247d
Artifact SHA-256
8a7f358f4fba07c15d3fedd681de4cf65ce5d197ca8d3a3bd5b3b51affc1ee34
Bytes
14011
Spring strength
Forces.SpringStrength
Profile force gain
Forces.ForceGain
Elevator force scale
Forces.ElevatorForceScale
Aileron force scale
Forces.AileronForceScale
Output force limit
Forces.MaxOutputForce
Elevator Authority
StickFeel.TrimRelief.ElevatorAuthority
Aileron Authority
StickFeel.TrimRelief.AileronAuthority
Force tuning speed/reference
Forces.CruiseSpeedRefKnots
Gain
Mechanical.FlapMotion.Gain
Gain
Mechanical.GearMotion.Gain
Gain
Engine.Rumble.Gain
Gain
Aero.Flap.Gain
Spring deadband
Forces.SpringDeadband
Master force gain
Forces.MasterGain
QBlend Enabled
Forces.QBlendEnabled
QSpring Minimum Factor
Forces.QSpringMinimumFactor
QSpring Start Knots
Forces.QSpringStartKnots
Spring response reference speed
Forces.QSpringFullKnots
Airspeed spring stiffening gain
Forces.SpringAirspeedStiffenGain
Airspeed spring stiffening limit
Forces.SpringAirspeedStiffenCap
Trim feel
StickFeel.TrimFeelEnabled
Trim relief
StickFeel.TrimReliefEnabled
Force Trim Enabled
StickFeel.ForceTrimEnabled
GLoad Enabled
StickFeel.GLoadEnabled
Rate Damping Enabled
StickFeel.RateDampingEnabled
Autopilot follow
Autopilot.FollowEnabled
Autopilot follow authority
Autopilot.FollowAuthority
Autopilot neutral hold
Autopilot.NeutralHoldEnabled
Autopilot neutral hold strength
Autopilot.NeutralHoldStrength
Enabled
Aero.Enabled
Gain
Aero.Stall.Gain
Gain
Aero.Mach.Gain
Maximum flap index
Aero.Flap.MaxFlapIndex
Minimum flap index
Aero.Flap.MinFlapIndex
Gain
Aero.Gear.Gain
Shaker Enabled
Aero.ShakerEnabled
Stick shaker amplitude
Aero.Shaker.Amplitude
Enabled
Ground.Enabled
Gain
Ground.Rumble.Gain
Gain
Ground.Bumps.Gain
Gain
Ground.Thump.Gain
Gain
Ground.Reverse.Gain
Enabled
Engine.Enabled
Enabled
Mechanical.Enabled
Explore all built-in profile references →

Content expanded · What’s new

Something missing or a source that needs attention?

Suggest a correction ↗