Start here
A few places to begin, from the aircraft’s story to the people who fly it.
Meet the aircraft
The Typhoon grew from a UK, German, Italian and Spanish programme. Airbus describes its swing-role design as able to move between air-to-air and air-to-surface tasks within one mission. CJ Simulations represents the aircraft in its MSFS package.
Eurofighter Typhoon
Airbus · Read more ↗Meet Eurofighter Typhoon
The Typhoon grew from a UK, German, Italian and Spanish programme. Airbus describes its swing-role design as able to move between air-to-air and air-to-surface tasks within one mission. CJ Simulations represents the aircraft in its MSFS package.
Eurofighter Typhoon
Eurofighter → · Explore the family →
Eurofighter Typhoon
Airbus · Eurofighter Typhoon ↗Aircraft type designators
No type designator selected for this reference.
History & design
A four-nation development programme
Prototype construction began in 1989 within a partnership between Britain, Germany, Italy and Spain. Testing expanded through the 1990s, and the aircraft entered the four partner air forces between 2003 and 2005.
Eurofighter GmbH · Eurofighter programme milestones ↗Programme chronology
Capability continued to change
Export deliveries began with Austria in 2007 and Saudi Arabia in 2008. Subsequent enhancement programmes integrated new sensors and weapons, so the tranche and upgrade standard matter when identifying an aircraft.
Eurofighter GmbH · Eurofighter programme milestones ↗Historical deliveries and upgrades
Systems & details
Digital controls are part of the airframe
Airbus describes a deliberately unstable design managed by a digital flight-control system. Agility therefore depends on that integrated control system, rather than behaving like a conventionally stable aircraft with direct mechanical controls.
A configuration for each mission
Typhoon can combine air-to-air and air-to-surface roles, with stores distributed across thirteen stations. The payload arrangement is part of the aircraft configuration being compared, not a detail that can be ignored when describing performance.
In your simulator
Systems, equipment and documentation for each developer’s aircraft.
MSFS 2020 · MSFS 2024Eurofighter Typhoon
CJ Simulations · Released
Eurofighter Typhoon
CJ Simulations · Released
Manuals & resources
Find your next read
Choose a topic for a short introduction and a link to the original source. Simulator references identify the developer and edition they cover.
Developer documentation
CJ Simulations Eurofighter TyphoonEurofighter Typhoon · MSFS 2020 · MSFS 2024
CJ Simulations lists its Eurofighter Typhoon for MSFS 2020 and MSFS 2024.
Product listing captured 28 September 2026; MSFS 2020 and 2024
CJ Simulations / Just Flight · Read the source ↗Manual
CJ Simulations Eurofighter Typhoon manualEurofighter Typhoon · MSFS 2020 · MSFS 2024
The Typhoon manual describes fly-by-wire controls, automatic slats and flaps, and airspeed-dependent automatic trim, with manual trim during landing.
Manual captured 28 September 2026; fly-by-wire, slats/flaps and trim
CJ Simulations / Just Flight · Read the source ↗Read the original documentation from the people who created it. Manuals open on their publisher’s website.
Manual
CJ Simulations Eurofighter Typhoon manualCJ Simulations / Just Flight · Manual captured 28 September 2026; fly-by-wire, slats/flaps and trimManufacturer aircraft history
Eurofighter TyphoonAirbus · Manufacturer programme overview captured 29 September 2026; multinational design and swing roleDeveloper documentation
CJ Simulations Eurofighter TyphoonCJ Simulations / Just Flight · Product listing captured 28 September 2026; MSFS 2020 and 2024Aircraft reference
Eurofighter aircraft performanceEurofighter GmbH · Consortium headline performance figures Eurofighter programme milestonesEurofighter GmbH · Consortium programme chronologyBuilt-in force-feedback profiles
Read the documentary basis, editable starting settings and remaining questions for the aircraft you fly. Each explanation refers to the exact profile revision shown.
Catalogue programme-20261022-v1 · 2 profile choices
CJ Simulations Eurofighter Typhoon
CJ Simulations · Free and Pro · Revision 1 · Inherited starting point
MSFS 2020 · MSFS 2024
A multinational twin-engine fighter designed for air-to-air and air-to-surface missions.
IndiaFoxtEcho EF-2000 Typhoon
IndiaFoxtEcho · Free and Pro · Revision 1 · Inherited starting point
MSFS 2020 · MSFS 2024
A multinational twin-engine fighter designed for air-to-air and air-to-surface missions.
CJ Simulations Eurofighter Typhoon
A multinational twin-engine fighter designed for air-to-air and air-to-surface missions.
Aircraft and simulator scope
- CJ Simulations Eurofighter Typhoon · CJ Simulations · MSFS 2020 · Add-on starting point
- CJ Simulations Eurofighter Typhoon · CJ Simulations · MSFS 2024 · Add-on starting point
The simulator model and controls
CJ Simulations Eurofighter Typhoon is the selected CJ Simulations configuration.
How this profile feels
The spring stays independent of airspeed. Directed aerodynamic loading is omitted.
Pitch-trim relief is off. Autopilot following is off.
Aircraft and configuration
The Typhoon grew from a UK, German, Italian and Spanish programme. Airbus describes its swing-role design as able to move between air-to-air and air-to-surface tasks within one mission. CJ Simulations represents the aircraft in its MSFS package.
About the values
Strengths are normalized hardware-feel settings. They set the effect balance; hand force depends on the device and its limits. The IAS reference is a tuning value.
Documentary review and sources
These decisions describe the documentary basis and remaining gaps for this revision. Aircraft documentation and a starting setting describe different kinds of evidence.
Aircraft and variant
InheritedCJ Simulations Eurofighter Typhoon is the selected CJ Simulations configuration.
Flight controls
InheritedA multinational twin-engine fighter designed for air-to-air and air-to-surface missions.
Trim
InheritedThe profile uses the trim behaviour configured below. Pitch relief is off, with stored authority 0; roll authority is 0.
Autopilot and stability
InheritedAutopilot following is off; the configured spring and load retain the hardware feel.
Equipment
InheritedThe Typhoon grew from a UK, German, Italian and Spanish programme. Airbus describes its swing-role design as able to move between air-to-air and air-to-surface tasks within one mission. CJ Simulations represents the aircraft in its MSFS package.
Speeds and limits
InheritedThe indicated-speed references set the profile response scale; they are separate from aircraft operating limits.
Simulator integration
InheritedThe profile targets msfs2020, msfs2024. Add-on-specific controls use only the supported references configured by this profile.
Force-feedback settings
InheritedThe settings define the profile’s effect balance. Device output limits affect physical hand force.
Starting settings and their rationale
These configured values are starting estimates. The explanations describe what each setting controls; physical validation appears separately below.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0.5 | What it controls and whyThis profile uses electronic-control centering for Eurofighter Typhoon. The baseline spring is 0.5. Low-speed spring blending is off. |
| Master force gain | Starting value0.8 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| Profile force gain | Starting value0 | What it controls and whyThe stored 0 aerodynamic-load gain is inactive under the fixed-centre control law. |
| Force tuning speed/reference | Starting value250 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Spring response reference speed | Starting value65 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Aileron force scale | Starting value0.7 | What it controls and whyRoll and pitch aerodynamic scales are 0.7 and 0.86, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value0.86 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Trim feel | Starting valueDisabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueDisabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
All 44 starting settings and their rationale
The settings define the profile’s effect balance. Device output limits affect physical hand force.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0.5 | What it controls and whyThis profile uses electronic-control centering for Eurofighter Typhoon. The baseline spring is 0.5. Low-speed spring blending is off. |
| Spring deadband | Starting value0.04 | What it controls and whySets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Profile force gain | Starting value0 | What it controls and whyThe stored 0 aerodynamic-load gain is inactive under the fixed-centre control law. |
| Master force gain | Starting value0.8 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| QBlend Enabled | Starting valueDisabled | What it controls and whyAllows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| QSpring Minimum Factor | Starting value0.55 | What it controls and whySets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| QSpring Start Knots | Starting value8 kt | What it controls and whySets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring response reference speed | Starting value65 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Force tuning speed/reference | Starting value250 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening gain | Starting value0 | What it controls and whyAdds permitted spring resistance above the full-blend speed. Zero removes this high-speed increase. |
| Airspeed spring stiffening limit | Starting value2 | What it controls and whyLimits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | Starting value0.7 | What it controls and whyRoll and pitch aerodynamic scales are 0.7 and 0.86, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value0.86 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
| Trim feel | Starting valueDisabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueDisabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Elevator Authority | Starting value0 | What it controls and whyThe profile uses the trim behaviour configured below. Pitch relief is off, with stored authority 0; roll authority is 0. |
| Aileron Authority | Starting value0 | What it controls and whyScales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| Force Trim Enabled | Starting valueDisabled | What it controls and whyEnables local force trim, separate from aircraft-owned trim and add-on integration qualification. |
| GLoad Enabled | Starting valueDisabled | What it controls and whyAllows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| Rate Damping Enabled | Starting valueDisabled | What it controls and whyEnables rate damping with the configured coefficients and control law. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot follow authority | Starting value0.1 | What it controls and whySets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot neutral hold strength | Starting value0.6 | What it controls and whySets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Gain | Starting value0 | What it controls and whySets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Gain | Starting value0 | What it controls and whySets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Gain | Starting value0 | What it controls and whySets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Maximum flap index | Starting value3 | What it controls and whySets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Minimum flap index | Starting value2 | What it controls and whySets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Gain | Starting value0 | What it controls and whySets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Shaker Enabled | Starting valueDisabled | What it controls and whyPermits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Stick shaker amplitude | Starting value0.5 | What it controls and whySets triggered shaker strength; inactive while the shaker feature is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables ground effects; each still needs its own strength and contact or motion telemetry. |
| Gain | Starting value0.24 | What it controls and whySets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Gain | Starting value0.18 | What it controls and whySets gear-bump texture during ground motion, separate from touchdown impact. |
| Gain | Starting value0.32 | What it controls and whySets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Gain | Starting value0 | What it controls and whySets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Enabled | Starting valueDisabled | What it controls and whyEnables engine cues with nonzero settings and valid running-engine telemetry. |
| Gain | Starting value0 | What it controls and whySets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Enabled | Starting valueEnabled | What it controls and whyEnables accessory cues with configured strengths and observed accessory movement. |
| Gain | Starting value0 | What it controls and whySets texture from observed flap movement; a command without movement does not establish the cue. |
| Gain | Starting value0.025 | What it controls and whySets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Limits and open questions
- Documentary starting point; installed-title capture and physical force acceptance are pending.
- Force amplitudes and tuning references are engineering estimates, not measured hand forces.
- No verified add-on servo-target or hydraulic-failure interface; autopilot following and hydraulic-loss forces remain off.
- Manufacturer/developer-qualified title matching is proposed from product identity; unidentified titles do not claim this edition.
- The retained manual predates the current native MSFS 2024 edition; control-policy compatibility needs installed acceptance.
- Automatic slat/flap and low-speed manual-trim transitions are not tracked by a dedicated adapter.
Physical validation
No physical force validation is recorded in this public catalogue for this revision. Documentary review and software checks do not establish how a particular device feels.
Discuss this aircraft (0)
Questions, observations and useful sources from the community.
No published discussions yet. Bring a question or share a useful source.
Open aircraft discussions →Content expanded · What’s new
Something missing or a source that needs attention?
Suggest a correction ↗