Start here
A few places to begin, from the aircraft’s story to the people who fly it.
Meet the aircraft
Northrop's F-5 family combined a compact supersonic fighter design with relatively low operating costs. Northrop Grumman describes a shift from front-line fighter duties toward lead-in training, while the U.S. Navy has used F-5E/F aircraft in adversary squadrons. The SC Designs add-on below specifically represents an F-5E.
Northrop F-5E Tiger II
Northrop Grumman · Read more ↗Meet Northrop F-5E Tiger II
Northrop developed the compact supersonic F-5 around relatively low operating costs. Northrop Grumman describes its later use in lead-in training, and the U.S. Navy employs F-5E/F aircraft in adversary squadrons. SC Designs represents the F-5E.
Northrop F-5E Tiger II
Northrop → · Explore the family →
Northrop F-5E Tiger II
Northrop Grumman · F-5 Tiger Fighter Jet ↗Aircraft type designators
No type designator selected for this reference.
History & design
An export fighter with a trainer relative
Northrop developed the F-5 alongside the T-38 as a private venture. The United States selected the fighter for its Military Assistance Program in 1962, establishing the export role of the early F-5 family.
Pima Air and Space Museum · Northrop F-5E Tiger II ↗Pima Air and Space Museum: F-5E Tiger II
The Tiger II follows the Freedom Fighter
A 1970 replacement competition led to an improved design with stronger engines, upgraded avionics, a longer fuselage and larger wings. The single-seat version became the F-5E and the two-seat aircraft the F-5F, both named Tiger II.
Pima Air and Space Museum · Northrop F-5E Tiger II ↗Pima Air and Space Museum: F-5E Tiger II
Systems & details
An aircraft used to teach fighter tactics
American Air Force, Navy and Marine Corps units used Tiger IIs as adversaries in air-combat training. Pima displays its F-5E in VFC-13 markings from Fallon, representing that later training role.
Distinguish the E from earlier F-5s
The wing and propulsion changes are part of the Tiger II’s identity. An F-5A reference does not automatically describe the F-5E, even though their overall shapes are closely related.
In your simulator
Systems, equipment and documentation for each developer’s aircraft.
MSFS 2020 · MSFS 2024F-5E Tiger II
SC Designs · Released
F-5E Tiger II
SC Designs · Released
Manuals & resources
Find your next read
Choose a topic for a short introduction and a link to the original source. Simulator references identify the developer and edition they cover.
Developer documentation
SC Designs F-5E Tiger IIF-5E Tiger II · MSFS 2020 · MSFS 2024
Read the developer document for this specific product and simulator edition.
Product listing captured 28 September 2026; MSFS 2020 and 2024
SC Designs / Just Flight · Read the source ↗Manual
SC Designs F-5E Tiger II manualF-5E Tiger II · MSFS 2020 · MSFS 2024
Read the developer document for this specific product and simulator edition.
Manual captured 28 September 2026; PDF pp. 6, 12, 14
SC Designs / Just Flight · Read the source ↗Read the original documentation from the people who created it. Manuals open on their publisher’s website.
Manual
SC Designs F-5E Tiger II manualSC Designs / Just Flight · Manual captured 28 September 2026; PDF pp. 6, 12, 14Manufacturer aircraft history
F-5 Tiger Fighter JetNorthrop Grumman · Manufacturer programme overview captured 29 September 2026; F-5 family and adversary trainingDeveloper documentation
SC Designs F-5E Tiger IISC Designs / Just Flight · Product listing captured 28 September 2026; MSFS 2020 and 2024Aircraft documentation
Northrop F-5E Tiger IIPima Air and Space Museum · Pima Air and Space Museum: F-5E Tiger IIBuilt-in force-feedback profiles
Read the documentary basis, editable starting settings and remaining questions for the aircraft you fly. Each explanation refers to the exact profile revision shown.
Catalogue programme-20261022-v1 · 1 profile choice
SC Designs F-5E Tiger II
SC Designs · Free and Pro · Revision 2 · Inherited starting point
MSFS 2020 · MSFS 2024
An agile Northrop fighter whose long service also includes training and adversary roles.
SC Designs F-5E Tiger II
An agile Northrop fighter whose long service also includes training and adversary roles.
Aircraft and simulator scope
- SC Designs F-5E Tiger II · SC Designs · MSFS 2020 · Add-on starting point
- SC Designs F-5E Tiger II · SC Designs · MSFS 2024 · Add-on starting point
The simulator model and controls
SC Designs F-5E Tiger II is the selected SC Designs configuration.
How this profile feels
The spring stays independent of airspeed. Directed aerodynamic loading is omitted.
Pitch-trim relief is off. Autopilot following is off.
Aircraft and configuration
Northrop developed the compact supersonic F-5 around relatively low operating costs. Northrop Grumman describes its later use in lead-in training, and the U.S. Navy employs F-5E/F aircraft in adversary squadrons. SC Designs represents the F-5E.
About the values
Strengths are normalized hardware-feel settings. They set the effect balance; hand force depends on the device and its limits. The IAS reference is a tuning value.
Documentary review and sources
These decisions describe the documentary basis and remaining gaps for this revision. Aircraft documentation and a starting setting describe different kinds of evidence.
Aircraft and variant
InheritedSC Designs F-5E Tiger II is the selected SC Designs configuration.
Flight controls
InheritedAn agile Northrop fighter whose long service also includes training and adversary roles.
Trim
InheritedThe profile uses the trim behaviour configured below. Pitch relief is off, with stored authority 0; roll authority is 0.
Autopilot and stability
InheritedAutopilot following is off; the configured spring and load retain the hardware feel.
Equipment
InheritedNorthrop developed the compact supersonic F-5 around relatively low operating costs. Northrop Grumman describes its later use in lead-in training, and the U.S. Navy employs F-5E/F aircraft in adversary squadrons. SC Designs represents the F-5E.
Speeds and limits
InheritedThe indicated-speed references set the profile response scale; they are separate from aircraft operating limits.
Simulator integration
InheritedThe profile targets msfs2020, msfs2024. Add-on-specific controls use only the supported references configured by this profile.
Force-feedback settings
InheritedThe settings define the profile’s effect balance. Device output limits affect physical hand force.
Starting settings and their rationale
These configured values are starting estimates. The explanations describe what each setting controls; physical validation appears separately below.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0.44 | What it controls and whyThis profile uses powered-control feel for Northrop F-5E Tiger II. The baseline spring is 0.44. Low-speed spring blending is off. |
| Master force gain | Starting value0.85 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| Profile force gain | Starting value0.25 | What it controls and whyThe stored 0.25 aerodynamic-load gain is inactive under the zero hydraulic-load factor. |
| Force tuning speed/reference | Starting value250 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Spring response reference speed | Starting value65 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Aileron force scale | Starting value0.72 | What it controls and whyRoll and pitch aerodynamic scales are 0.72 and 1, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value1 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Trim feel | Starting valueDisabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueDisabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
All 44 starting settings and their rationale
The settings define the profile’s effect balance. Device output limits affect physical hand force.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0.44 | What it controls and whyThis profile uses powered-control feel for Northrop F-5E Tiger II. The baseline spring is 0.44. Low-speed spring blending is off. |
| Spring deadband | Starting value0.04 | What it controls and whySets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Profile force gain | Starting value0.25 | What it controls and whyThe stored 0.25 aerodynamic-load gain is inactive under the zero hydraulic-load factor. |
| Master force gain | Starting value0.85 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| QBlend Enabled | Starting valueDisabled | What it controls and whyAllows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| QSpring Minimum Factor | Starting value0.55 | What it controls and whySets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| QSpring Start Knots | Starting value8 kt | What it controls and whySets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring response reference speed | Starting value65 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Force tuning speed/reference | Starting value250 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening gain | Starting value0 | What it controls and whyThe high-speed spring-stiffening gain is 0. No additional speed-driven stiffening is added; this does not disable independent aerodynamic loading. |
| Airspeed spring stiffening limit | Starting value2 | What it controls and whyLimits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | Starting value0.72 | What it controls and whyRoll and pitch aerodynamic scales are 0.72 and 1, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value1 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
| Trim feel | Starting valueDisabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueDisabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Elevator Authority | Starting value0 | What it controls and whyThe profile uses the trim behaviour configured below. Pitch relief is off, with stored authority 0; roll authority is 0. |
| Aileron Authority | Starting value0 | What it controls and whyScales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| Force Trim Enabled | Starting valueDisabled | What it controls and whyEnables local force trim, separate from aircraft-owned trim and add-on integration qualification. |
| GLoad Enabled | Starting valueDisabled | What it controls and whyAllows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| Rate Damping Enabled | Starting valueDisabled | What it controls and whyEnables rate damping with the configured coefficients and control law. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot follow authority | Starting value0.1 | What it controls and whySets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot neutral hold strength | Starting value0.6 | What it controls and whySets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Gain | Starting value0 | What it controls and whySets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Gain | Starting value0 | What it controls and whySets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Gain | Starting value0 | What it controls and whySets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Maximum flap index | Starting value3 | What it controls and whySets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Minimum flap index | Starting value2 | What it controls and whySets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Gain | Starting value0 | What it controls and whySets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Shaker Enabled | Starting valueDisabled | What it controls and whyPermits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Stick shaker amplitude | Starting value0.5 | What it controls and whySets triggered shaker strength; inactive while the shaker feature is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables ground effects; each still needs its own strength and contact or motion telemetry. |
| Gain | Starting value0.4 | What it controls and whySets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Gain | Starting value0.25 | What it controls and whySets gear-bump texture during ground motion, separate from touchdown impact. |
| Gain | Starting value0.65 | What it controls and whySets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Gain | Starting value0 | What it controls and whySets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Enabled | Starting valueDisabled | What it controls and whyEnables engine cues with nonzero settings and valid running-engine telemetry. |
| Gain | Starting value0 | What it controls and whySets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Enabled | Starting valueEnabled | What it controls and whyEnables accessory cues with configured strengths and observed accessory movement. |
| Gain | Starting value0.018 | What it controls and whySets texture from observed flap movement; a command without movement does not establish the cue. |
| Gain | Starting value0.025 | What it controls and whySets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Limits and open questions
- Documentary starting point; installed-title capture and physical force acceptance are pending.
- Force amplitudes and tuning references are engineering estimates, not measured hand forces.
- No verified add-on servo-target or hydraulic-failure interface; autopilot following and hydraulic-loss forces remain off.
- Manufacturer/developer-qualified title matching is proposed from product identity; unidentified titles do not claim this edition.
- The fixed artificial-feel model is a conservative engineering choice, not a measured F-5 control-system model.
- Inherited force magnitudes remain editable estimates; aircraft-specific settings for speed response, controls, trim, autopilot and enabled effects are retained. New physical feel acceptance is pending.
Physical validation
No physical force validation is recorded in this public catalogue for this revision. Documentary review and software checks do not establish how a particular device feels.
Discuss this aircraft (0)
Questions, observations and useful sources from the community.
No published discussions yet. Bring a question or share a useful source.
Open aircraft discussions →Content expanded · What’s new
Something missing or a source that needs attention?
Suggest a correction ↗