PZL WARSZAWA-OKĘCIE / GENERAL AVIATION

PZL-104 Wilga

A Polish utility aircraft designed for short takeoffs and landings.

+ Compare aircraft
Type designatorsPZ04Models & sources ↓

Choose the version you fly to narrow the edition-specific reading.

Simulator ecosystemsMSFS · X-Plane
YOUR AIRCRAFT COMPANION

Start here

A few places to begin, from the aircraft’s story to the people who fly it.

Introduction

Meet the aircraft

PZL Warszawa-Okęcie developed the Wilga for civil utility and short-field work. The manufacturer later became part of EADS. Versions differ in engines and equipment; the simulator products also have separate X-Plane generation support.

Aircraft background

Wikipedia contributors · Read more ↗
Pilot account

Two consecutive assignments leave very different memories

Reviewing his logbooks reminded Haines that some aircraft stood out without any prompting from the written entries. A hot, humid assignment in North Carolina was one of those occasions. Flying the Wilga meant working substantial control surfaces through a large stick, then trying to hold formation with the photographic aircraft in hazy conditions. The following Ercoupe assignment made the difference especially memorable.

AOPA · August 1997 retrospective. North Carolina flights on 10–11 July 1990: a radial-powered Wilga followed by an Ercoupe. Haines’s September 1990 Wilga report identifies the 80 variant.

AOPA · Read more ↗
Simulator systems

DynaFeel adjusts simulated control response

The developer describes DynaFeel sliders changing control heaviness and response with airspeed. This describes the add-on’s flight-control modelling; the source does not document physical force-feedback output.

PZL-104 Wilga · Thranda · Thranda · X-Plane 12 · X-Plane 11

Thranda · Read more ↗
WATCH & EXPLORE

Into the cockpit

YouTube
Flight video

TouchingCloud · 20 min ·

PZL-104 Wilga towing L-13 Blanik glider - cockpit view [RL]

A Wilga tows a Blaník glider, filmed from the towplane cockpit.

Real aircraft · PZL-104 Wilga

Watch on YouTube ↗

Preview images are served by AirframeDB. Videos open on YouTube only when you choose to watch.

THE AIRCRAFT

Meet PZL-104 Wilga

PZL Warszawa-Okęcie developed the Wilga for civil utility and short-field work. The manufacturer later became part of EADS. Versions differ in engines and equipment; the simulator products also have separate X-Plane generation support.

Research-based aircraft backgroundWikipedia contributors · PZL-104 Wilga ↗
FAMILY, MODELS & VARIANTS

PZL-104 Wilga

PZL Warszawa-Okęcie → · Explore the family →

AIRCRAFT IDENTITY

Aircraft type designators

Use the code for the model you are flying. The linked authority lists the applicable aircraft.

HOW IT CAME TO BE

History & design

A Polish utility aircraft enters the American market

Haines’s 1990 report describes Wilga 80s being assembled and test-flown in Poland, then dismantled for shipment and reassembly in the United States. Melex’s North Carolina operation formed part of that introduction to American customers.

AOPA Pilot · Wilga 80: Pretty as a Pickle ↗

Historical import arrangements described in September 1990

FROM THE COCKPIT

Pilot accounts

Two consecutive assignments leave very different memories

Thomas B. Haines

Reviewing his logbooks reminded Haines that some aircraft stood out without any prompting from the written entries. A hot, humid assignment in North Carolina was one of those occasions. Flying the Wilga meant working substantial control surfaces through a large stick, then trying to hold formation with the photographic aircraft in hazy conditions.

The following Ercoupe assignment made the difference especially memorable. Its small yoke and gentle responses felt far removed from the Wilga’s demanding controls. Haines used the two flights to explain why apparently ordinary logbook entries could preserve such distinct experiences. The photographic difficulty of making a silver Ercoupe visible belonged to that second aircraft; the Wilga supplied the more physically demanding part of the comparison.

AOPA · August 1997 retrospective. North Carolina flights on 10–11 July 1990: a radial-powered Wilga followed by an Ercoupe. Haines’s September 1990 Wilga report identifies the 80 variant.

Read the full account · AOPA ↗

An exchange flight becomes a candid accident account

Dennis Weatherald

Weatherald traded his Cessna 210 for a Wilga and initially liked the new aircraft’s comfortable cockpit and view. The journey soon became much harder than expected. Strong winds slowed his progress, turbulence disrupted equipment and his fuel calculations grew increasingly worrying as he approached Sault Ste. Marie.

He recounts the engine stopping before he reached the airport, followed by an emergency landing into trees and snow. He escaped with minor injuries and met people walking nearby while emergency services approached. EAA published the story as a learning account, and its difficult ending is central to it. The report captures both an owner’s early enthusiasm and the decisions and circumstances he described after a deeply unsuccessful first journey.

EAA · April 2022. First journey in a Continental-powered Wilga 104-32 acquired in northern Ontario. The preceding day’s Cessna 210 flight is a separate leg; accident details are Weatherald’s recollection.

Read the full account · EAA Inspire ↗
VIRTUAL VERSIONS

In your simulator

Systems, equipment and documentation for each developer’s aircraft.

Compare simulator versions →
X-Plane 12 · X-Plane 11

PZL-104 Wilga · Thranda

Thranda · Released

X-Plane 12 · X-Plane 11Third-party add-on

Aircraft

Products and variants
ProductSimulatorProduct type
Wilga PZL 104 Dynamic Generation Series XP12 ↗ReleasedX-Plane 12 Aircraft
Wilga PZL 104 Dynamic Generation Series XP11 ↗ReleasedX-Plane 11 Aircraft

The X-Plane 11 edition has its own panel options

The earlier product lists three supplied panel presets and configurable instrument positions. It documents GNS430/530 swapping with an aircraft restart.

Thranda · Wilga PZL 104 Dynamic Generation Series XP11 ↗

Thranda Wilga X-Plane 11 product description

The earlier package offers adjustable realism and an electric tug

The X-Plane 11 listing includes simplified or realistic engine and tailwheel settings, checklist popups, and a controllable electric tug for moving the aircraft.

Thranda · Wilga PZL 104 Dynamic Generation Series XP11 ↗

X-Plane 11 Wilga feature list

The X-Plane 12 release replaces the earlier popup with an EFB

Thranda lists a tablet interface with persistent settings, a weight-and-balance manager, embedded checklists and separate livery editors.

Thranda · Wilga PZL 104 Dynamic Generation Series XP12 ↗

X-Plane 12 Wilga product description

Panel presets can be rearranged and saved

The X-Plane 12 product supplies six panel presets, including a G1000 layout, with movable instruments and saved custom arrangements. Third-party GTN support depends on the relevant separate plugin.

Thranda · Wilga PZL 104 Dynamic Generation Series XP12 ↗

X-Plane 12 Wilga panel features

DynaFeel adjusts simulated control response

The developer describes DynaFeel sliders changing control heaviness and response with airspeed. This describes the add-on’s flight-control modelling; the source does not document physical force-feedback output.

Thranda · Wilga PZL 104 Dynamic Generation Series XP12 ↗

Thranda Wilga X-Plane 12 feature list

MSFS 2020 · MSFS 2024

Wilga 35/80 Series

Got Friends · Released

MSFS 2020 · MSFS 2024Third-party add-on

Aircraft

Products and variants
ProductSimulatorProduct type
Wilga 35/80 Series ↗ReleasedMSFS 2020 · MSFS 2024 Aircraft
THE NUMBERS

Aircraft specifications

Published figures for the named real-aircraft variant. Simulator equipment and performance can differ.

Specifications (Wilga 35A)PZL-104 Wilga · Specifications (Wilga 35A) · real aircraft; source units retained
SpecificationPublished value
Length8.10 m (26 ft 6 in)
Wingspan11.12 m (36 ft 5 in)
Height2.96 m (9 ft 6 in)
Wing area15.50 m² (166.85 sq ft)
Empty weight900 kg (1,984 lb)
Gross weight1,300 kg (2,868 lb)
Powerplant1 × Ivchenko AI-14 RA air-cooled 9-cylinder radial piston engine , 194 kW (260 hp)
Maximum speed195 km/h (121 mph, 105 kn)
Range670 km (416 mi, 361 nmi)
Service ceiling4,040 m (13,250 ft)
Rate of climb5.5 m/s (1,082 ft/min)
Wikipedia contributors · PZL-104 Wilga ↗
GO TO THE SOURCE

Manuals & resources

Find your next read

Choose a topic for a short introduction and a link to the original source. Simulator references identify the developer and edition they cover.

Simulator documentation

DynaFeel adjusts simulated control responsePZL-104 Wilga · Thranda · Thranda · X-Plane 12 · X-Plane 11

The developer describes DynaFeel sliders changing control heaviness and response with airspeed. This describes the add-on’s flight-control modelling; the source does not document physical force-feedback output.

Thranda Wilga X-Plane 12 feature list

Thranda · Read the source ↗
The X-Plane 11 edition has its own panel optionsPZL-104 Wilga · Thranda · Thranda · X-Plane 12 · X-Plane 11

The earlier product lists three supplied panel presets and configurable instrument positions. It documents GNS430/530 swapping with an aircraft restart.

Thranda Wilga X-Plane 11 product description

Thranda · Read the source ↗
The earlier package offers adjustable realism and an electric tugPZL-104 Wilga · Thranda · Thranda · X-Plane 12 · X-Plane 11

The X-Plane 11 listing includes simplified or realistic engine and tailwheel settings, checklist popups, and a controllable electric tug for moving the aircraft.

X-Plane 11 Wilga feature list

Thranda · Read the source ↗
The X-Plane 12 release replaces the earlier popup with an EFBPZL-104 Wilga · Thranda · Thranda · X-Plane 12 · X-Plane 11

Thranda lists a tablet interface with persistent settings, a weight-and-balance manager, embedded checklists and separate livery editors.

X-Plane 12 Wilga product description

Thranda · Read the source ↗
Panel presets can be rearranged and savedPZL-104 Wilga · Thranda · Thranda · X-Plane 12 · X-Plane 11

The X-Plane 12 product supplies six panel presets, including a G1000 layout, with movable instruments and saved custom arrangements. Third-party GTN support depends on the relevant separate plugin.

X-Plane 12 Wilga panel features

Thranda · Read the source ↗

Pilot account

Two consecutive assignments leave very different memoriesAOPA · August 1997 retrospective. North Carolina flights on 10–11 July 1990: a radial-powered Wilga followed by an Ercoupe. Haines’s September 1990 Wilga report identifies the 80 variant.

Reviewing his logbooks reminded Haines that some aircraft stood out without any prompting from the written entries. A hot, humid assignment in North Carolina was one of those occasions. Flying the Wilga meant working substantial control surfaces through a large stick, then trying to hold formation with the photographic aircraft in hazy conditions. The following Ercoupe assignment made the difference especially memorable.

Thomas B. Haines

AOPA · Read the source ↗
An exchange flight becomes a candid accident accountEAA · April 2022. First journey in a Continental-powered Wilga 104-32 acquired in northern Ontario. The preceding day’s Cessna 210 flight is a separate leg; accident details are Weatherald’s recollection.

Weatherald traded his Cessna 210 for a Wilga and initially liked the new aircraft’s comfortable cockpit and view. The journey soon became much harder than expected. Strong winds slowed his progress, turbulence disrupted equipment and his fuel calculations grew increasingly worrying as he approached Sault Ste. Marie. He recounts the engine stopping before he reached the airport, followed by an emergency landing into trees and snow.

Dennis Weatherald

EAA Inspire · Read the source ↗

Developer documentation

Wilga 35/80 Series — product listingWilga 35/80 Series · MSFS 2020 · MSFS 2024

Product listing captured 2026-09-30; edition scope from the reviewed catalogue

Got Friends · Read the source ↗

Read the original documentation from the people who created it. Manuals open on their publisher’s website.

Aircraft background

↗PZL-104 WilgaWikipedia contributors · Research background · retrieved 2026-09-12 ↗Wilga 80: Pretty as a PickleAOPA Pilot · Thomas B. Haines · September 1990; archived magazine reprint

Product

↗Wilga PZL 104 Dynamic Generation Series XP12Thranda · Official developer / designated store catalogue · checked 2026-09-12 ↗Wilga PZL 104 Dynamic Generation Series XP11Thranda · Official developer / designated store catalogue · checked 2026-09-12 ↗Wilga 35/80 Series – Got FriendsGot Friends · Product listing captured 2026-09-30; edition scope from the reviewed catalogue

Type designator

↗ICAO Doc 8643 — aircraft type designatorsInternational Civil Aviation Organization · Public search data retrieved 2026-09-14; authority update 2026-09-03
AIRCRAFT AND FEEL

Built-in force-feedback profiles

Read the documentary basis, editable starting settings and remaining questions for the aircraft you fly. Each explanation refers to the exact profile revision shown.

Catalogue programme-20261022-v1 · 11 profile choices

FFB-BRIDGE BUILT-IN PROFILE

Got Friends Wilga 80 Wheels

Free and ProRevision 5Inherited starting point

Got Friends Wilga 80 Wheels: The selected response supplies utility-aircraft stick loading.

Aircraft and simulator scope

  • Got Friends Wilga 80 Wheels · Got Friends · MSFS 2020 · Add-on starting point
  • Got Friends Wilga 80 Wheels · Got Friends · MSFS 2024 · Add-on starting point

The simulator model and controls

PZL Warszawa-Okęcie developed the Wilga for civil utility and short-field work. The manufacturer later became part of EADS. Versions differ in engines and equipment; the simulator products also have separate X-Plane generation support.

This profile selects Got Friends Wilga 80 Wheels for MSFS 2020, MSFS 2024.

How this profile feels

The selected response supplies utility-aircraft stick loading. Spring resistance builds with the selected airspeed response. A separate aerodynamic term adds speed-dependent control load.

Pitch relief remains separate from engine choice and wheel/float equipment. Valid trim provides the configured pressure relief. Autopilot following is off.

Controls and trim

Wilga models use different radial or opposed-piston engines and surface fits. The 35/80 wheel and ski configurations, fixed-float H and modified P/X models retain their own equipment. The IO-540-powered Wilga 2000 is a separately identified development.

The selected implementation

The 35/80, P, H and X models have different engines, tyres or floats. The ski kit belongs to the 35A/80 configurations.

About the values

The gains are normalized profile settings. They describe the chosen effect balance; hand force depends on the device and its output limits. IAS references are tuning values rather than operating limits. Physical acceptance of this revision remains pending.

Documentary review and sources

These decisions describe the documentary basis and remaining gaps for this revision. Aircraft documentation and a starting setting describe different kinds of evidence.

Aircraft and variant
Inherited

This profile selects Got Friends Wilga 80 Wheels for MSFS 2020, MSFS 2024.

Flight controls
Inherited

Wilga models use different radial or opposed-piston engines and surface fits. The 35/80 wheel and ski configurations, fixed-float H and modified P/X models retain their own equipment. The IO-540-powered Wilga 2000 is a separately identified development.

Trim
Inherited

Pitch relief remains separate from engine choice and wheel/float equipment. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.

Autopilot and stability
Inherited

Autopilot following is off; the configured spring and load retain the hardware feel.

Equipment
Inherited

The 35/80, P, H and X models have different engines, tyres or floats. The ski kit belongs to the 35A/80 configurations.

Speeds and limits
Inherited

The indicated-speed references set the profile response scale; they are separate from aircraft operating limits.

Simulator integration
Inherited

The profile targets msfs2020, msfs2024. Add-on-specific controls use only the supported references configured by this profile.

Force-feedback settings
Inherited

The settings define the profile’s effect balance. Device output limits affect physical hand force.

Starting settings and their rationale

These configured values are starting estimates. The explanations describe what each setting controls; physical validation appears separately below.

Estimated starting settings · revision 5
SettingStarting valueWhat it controls and why
Spring strengthStarting value0.74 What it controls and whyThe selected response supplies utility-aircraft stick loading. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 55 KIAS.
Master force gainStarting value0.85 What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits.
Profile force gainStarting value0.8 What it controls and whyThe aerodynamic-load gain is 0.8 with an indicated-speed reference of 95 KIAS. This supplies speed-dependent loading alongside the spring.
Force tuning speed/referenceStarting value95 ktWhat it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Spring response reference speedStarting value55 ktWhat it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Aileron force scaleStarting value0.82 What it controls and whyRoll and pitch aerodynamic scales are 0.82 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.
Elevator force scaleStarting value1 What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Trim feelStarting valueDisabled What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
Trim reliefStarting valueEnabled What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
Autopilot followStarting valueDisabled What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel.
Autopilot neutral holdStarting valueDisabled What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target.
Output force limitStarting value0.55 What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate.
All 44 starting settings and their rationale

The settings define the profile’s effect balance. Device output limits affect physical hand force.

Estimated starting settings · revision 5
SettingStarting valueWhat it controls and why
Spring strengthStarting value0.74 What it controls and whyThe selected response supplies utility-aircraft stick loading. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 55 KIAS.
Spring deadbandStarting value0.04 What it controls and whySets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Profile force gainStarting value0.8 What it controls and whyThe aerodynamic-load gain is 0.8 with an indicated-speed reference of 95 KIAS. This supplies speed-dependent loading alongside the spring.
Master force gainStarting value0.85 What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits.
QBlend EnabledStarting valueEnabled What it controls and whyAllows baseline spring strength to rise with indicated airspeed where the control law permits it.
QSpring Minimum FactorStarting value0.55 What it controls and whySets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
QSpring Start KnotsStarting value20 ktWhat it controls and whySets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
Spring response reference speedStarting value55 ktWhat it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Force tuning speed/referenceStarting value95 ktWhat it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Airspeed spring stiffening gainStarting value0.15 What it controls and whyThe high-speed spring-stiffening gain is 0.15. It strengthens the permitted spring response above 55 KIAS, with the squared-speed ratio capped at 5.
Airspeed spring stiffening limitStarting value5 What it controls and whyLimits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Aileron force scaleStarting value0.82 What it controls and whyRoll and pitch aerodynamic scales are 0.82 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.
Elevator force scaleStarting value1 What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Output force limitStarting value0.55 What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate.
Trim feelStarting valueDisabled What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
Trim reliefStarting valueEnabled What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
Elevator AuthorityStarting value0.3 What it controls and whyPitch relief remains separate from engine choice and wheel/float equipment. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.
Aileron AuthorityStarting value0 What it controls and whyScales supported roll-trim relief and permitted centre movement. Zero removes roll response.
Force Trim EnabledStarting valueDisabled What it controls and whyEnables local force trim, separate from aircraft-owned trim and add-on integration qualification.
GLoad EnabledStarting valueEnabled What it controls and whyAllows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
Rate Damping EnabledStarting valueEnabled What it controls and whyEnables rate damping with the configured coefficients and control law.
Autopilot followStarting valueDisabled What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel.
Autopilot follow authorityStarting value0.1 What it controls and whySets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Autopilot neutral holdStarting valueDisabled What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target.
Autopilot neutral hold strengthStarting value0.6 What it controls and whySets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
EnabledStarting valueEnabled What it controls and whyEnables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
GainStarting value0.35 What it controls and whySets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
GainStarting value0 What it controls and whySets high-Mach buffet strength; onset and full-strength thresholds are separate.
GainStarting value0 What it controls and whySets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Maximum flap indexStarting value3 What it controls and whySets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Minimum flap indexStarting value2 What it controls and whySets the first flap detent that admits buffet; this is a handle index, not degrees.
GainStarting value0 What it controls and whySets gear aerodynamic buffet; movement and ground-contact cues are separate.
Shaker EnabledStarting valueDisabled What it controls and whyPermits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Stick shaker amplitudeStarting value0.5 What it controls and whySets triggered shaker strength; inactive while the shaker feature is disabled.
EnabledStarting valueEnabled What it controls and whyEnables ground effects; each still needs its own strength and contact or motion telemetry.
GainStarting value0.4 What it controls and whySets rolling texture strength, modified by speed, surface and undercarriage configuration.
GainStarting value0.25 What it controls and whySets gear-bump texture during ground motion, separate from touchdown impact.
GainStarting value0.65 What it controls and whySets landing-impact strength; landing telemetry and response shape determine the pulse.
GainStarting value0 What it controls and whySets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
EnabledStarting valueEnabled What it controls and whyEnables engine cues with nonzero settings and valid running-engine telemetry.
GainStarting value0.12 What it controls and whySets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
EnabledStarting valueEnabled What it controls and whyEnables accessory cues with configured strengths and observed accessory movement.
GainStarting value0.12 What it controls and whySets texture from observed flap movement; a command without movement does not establish the cue.
GainStarting value0 What it controls and whySets texture from observed gear movement, separate from aerodynamic and touchdown effects.
Limits and open questions
  • Force settings are engineering estimates, not measured grip forces. Installed-product and physical acceptance remain deferred.
  • AP follow and neutral hold are disabled pending a verified servo/trim contract.
  • Select the ski/float profile for fitted equipment; live fit switching, gust-lock and paddle interactions remain unqualified.

Physical validation

No physical force validation is recorded in this public catalogue for this revision. Documentary review and software checks do not establish how a particular device feels.

FFB-Bridge maintains this profile’s revisions and tuning discussion.

Revision 5 and download availability in FFB-Bridge ↗
Exact profile identity
Profile
addon-gotfriends-wilga-80
Artifact SHA-256
7fdf54e02b1ee100fdadc28212ed7acd827fbd14f3821b834a2ff30552e9a1dd
Bytes
13014
Spring strength
Forces.SpringStrength
Spring deadband
Forces.SpringDeadband
Profile force gain
Forces.ForceGain
Master force gain
Forces.MasterGain
QBlend Enabled
Forces.QBlendEnabled
QSpring Minimum Factor
Forces.QSpringMinimumFactor
QSpring Start Knots
Forces.QSpringStartKnots
Spring response reference speed
Forces.QSpringFullKnots
Force tuning speed/reference
Forces.CruiseSpeedRefKnots
Airspeed spring stiffening gain
Forces.SpringAirspeedStiffenGain
Airspeed spring stiffening limit
Forces.SpringAirspeedStiffenCap
Aileron force scale
Forces.AileronForceScale
Elevator force scale
Forces.ElevatorForceScale
Output force limit
Forces.MaxOutputForce
Trim feel
StickFeel.TrimFeelEnabled
Trim relief
StickFeel.TrimReliefEnabled
Elevator Authority
StickFeel.TrimRelief.ElevatorAuthority
Aileron Authority
StickFeel.TrimRelief.AileronAuthority
Force Trim Enabled
StickFeel.ForceTrimEnabled
GLoad Enabled
StickFeel.GLoadEnabled
Rate Damping Enabled
StickFeel.RateDampingEnabled
Autopilot follow
Autopilot.FollowEnabled
Autopilot follow authority
Autopilot.FollowAuthority
Autopilot neutral hold
Autopilot.NeutralHoldEnabled
Autopilot neutral hold strength
Autopilot.NeutralHoldStrength
Enabled
Aero.Enabled
Gain
Aero.Stall.Gain
Gain
Aero.Mach.Gain
Gain
Aero.Flap.Gain
Maximum flap index
Aero.Flap.MaxFlapIndex
Minimum flap index
Aero.Flap.MinFlapIndex
Gain
Aero.Gear.Gain
Shaker Enabled
Aero.ShakerEnabled
Stick shaker amplitude
Aero.Shaker.Amplitude
Enabled
Ground.Enabled
Gain
Ground.Rumble.Gain
Gain
Ground.Bumps.Gain
Gain
Ground.Thump.Gain
Gain
Ground.Reverse.Gain
Enabled
Engine.Enabled
Gain
Engine.Rumble.Gain
Enabled
Mechanical.Enabled
Gain
Mechanical.FlapMotion.Gain
Gain
Mechanical.GearMotion.Gain
Explore all built-in profile references →

Content expanded · What’s new

Something missing or a source that needs attention?

Suggest a correction ↗