Start here
A few places to begin, from the aircraft’s story to the people who fly it.
Meet the aircraft
The Dassault Falcon 50 is a three-engine business jet that first flew in 1976.
Dassault Falcon 50
contrail.shop · Read more ↗Meet Dassault Falcon 50
The Dassault Falcon 50 is a three-engine business jet that first flew in 1976.
Dassault Falcon 50
Dassault → · Explore the family →
Dassault Falcon 50
contrail.shop · Dassault Falcon 50 — aircraft background ↗Aircraft type designators
No type designator selected for this reference.
History & design
Designed for longer crossings
Dassault began design work in 1974 in response to demand for longer-range business travel. The prototype first flew on 7 November 1976; certification followed on 27 February 1979.
Dassault Aviation · Falcon 50 and 50EX history and datasheets ↗Manufacturer history
The later 50EX
Announced in 1995 and first flown in 1996, the 50EX introduced TFE731-40 engines and Collins Pro Line 4 avionics. Its specifications should not be substituted for the original 50.
Dassault Aviation · Falcon 50 and 50EX history and datasheets ↗Variant development
Systems & details
A wing with a lasting influence
The prototype flew with its revised supercritical wing in May 1977. Dassault subsequently adapted that wing for the Falcon 900 and 2000, making the 50 an important aerodynamic ancestor of later Falcons.
A separately documented modern simulation
The Contrail FA50 product describes custom navigation and automatic-flight functions, including VNAV, parallel-course options and an autothrottle with climb and cruise modes. Its developer also distinguishes the MSFS 2024 edition’s expanded EFB and walk-around features from the lighter EFB supplied for MSFS 2020. These are features of that rendition. They should not be imported into a historical Falcon 50 or 50EX equipment description, or assumed to describe a different developer’s Falcon.
In your simulator
Systems, equipment and documentation for each developer’s aircraft.
MSFS 2020 · MSFS 2024FA50
Contrail · Released
FA50
Contrail · Released
Manuals & resources
Find your next read
Choose a topic for a short introduction and a link to the original source. Simulator references identify the developer and edition they cover.
Manufacturer, developer or authorized-product aircraft context
Dassault Falcon 50 — aircraft backgroundDassault Falcon 50
The three-engine Falcon 50 business jet first flew in 1976.
Aircraft-context passage, preserved text line 77; reviewed 2026-09-29
contrail.shop · Read the source ↗Developer documentation
FA50 — product listingFA50 · MSFS 2020 · MSFS 2024
Individual product listing and edition passage reviewed 2026-09-29
contrail.shop · Read the source ↗Read the original documentation from the people who created it. Manuals open on their publisher’s website.
Manufacturer, developer or authorized-product aircraft context
Dassault Falcon 50 — aircraft backgroundcontrail.shop · Aircraft-context passage, preserved text line 77; reviewed 2026-09-29Aircraft reference
Falcon 50 and 50EX history and datasheetsDassault Aviation · Manufacturer historical account; separate Falcon 50 and 50EX datasheetsBuilt-in force-feedback profiles
Read the documentary basis, editable starting settings and remaining questions for the aircraft you fly. Each explanation refers to the exact profile revision shown.
Catalogue programme-20261022-v1 · 2 profile choices
Carenado Falcon 50
Carenado · Free and Pro · Revision 1 · Partial review
X-Plane 11
The Dassault Falcon 50 is a three-engine business jet that first flew in 1976.
Contrail FA50
Contrail · Free and Pro · Revision 1 · Inherited starting point
MSFS 2020 · MSFS 2024
The Dassault Falcon 50 is a three-engine business jet that first flew in 1976.
Contrail FA50
The Dassault Falcon 50 is a three-engine business jet that first flew in 1976.
Aircraft and simulator scope
- Contrail FA50 · Contrail · MSFS 2020 · Add-on starting point
- Contrail FA50 · Contrail · MSFS 2024 · Add-on starting point
The simulator model and controls
Contrail FA50 is the selected Contrail configuration.
How this profile feels
Spring resistance builds with the selected airspeed response. A separate aerodynamic term adds speed-dependent control load.
Valid trim provides the configured pressure relief. Autopilot following is off.
Aircraft and configuration
The Dassault Falcon 50 is a three-engine business jet that first flew in 1976.
About the values
Strengths are normalized hardware-feel settings. They set the effect balance; hand force depends on the device and its limits. The IAS reference is a tuning value.
Documentary review and sources
These decisions describe the documentary basis and remaining gaps for this revision. Aircraft documentation and a starting setting describe different kinds of evidence.
Aircraft and variant
InheritedContrail FA50 is the selected Contrail configuration.
Flight controls
InheritedThe Dassault Falcon 50 is a three-engine business jet that first flew in 1976.
Trim
InheritedThe profile uses the trim behaviour configured below. Pitch authority 0.15 relieves permitted loading; hydraulic centre movement is off. Roll authority is 0.08.
Autopilot and stability
InheritedAutopilot following is off; the configured spring and load retain the hardware feel.
Equipment
InheritedThe Dassault Falcon 50 is a three-engine business jet that first flew in 1976.
Speeds and limits
InheritedThe indicated-speed references set the profile response scale; they are separate from aircraft operating limits.
Simulator integration
InheritedThe profile targets msfs2020, msfs2024. Add-on-specific controls use only the supported references configured by this profile.
Force-feedback settings
InheritedThe settings define the profile’s effect balance. Device output limits affect physical hand force.
Starting settings and their rationale
These configured values are starting estimates. The explanations describe what each setting controls; physical validation appears separately below.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0.72 | What it controls and whyThis profile uses powered-control feel for Dassault Falcon 50. The baseline spring is 0.72. Its low-speed blend reaches baseline strength at 100 KIAS. |
| Master force gain | Starting value0.85 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| Profile force gain | Starting value0.46 | What it controls and whyThe aerodynamic-load gain is 0.46 with an indicated-speed reference of 260 KIAS. The hydraulic-load factor of 0.35 scales that modeled term; it is a selected artificial-feel approximation. |
| Force tuning speed/reference | Starting value260 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Spring response reference speed | Starting value100 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Aileron force scale | Starting value0.7 | What it controls and whyRoll and pitch aerodynamic scales are 0.7 and 0.75, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value0.75 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Trim feel | Starting valueEnabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueEnabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
All 44 starting settings and their rationale
The settings define the profile’s effect balance. Device output limits affect physical hand force.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0.72 | What it controls and whyThis profile uses powered-control feel for Dassault Falcon 50. The baseline spring is 0.72. Its low-speed blend reaches baseline strength at 100 KIAS. |
| Spring deadband | Starting value0.035 | What it controls and whySets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Profile force gain | Starting value0.46 | What it controls and whyThe aerodynamic-load gain is 0.46 with an indicated-speed reference of 260 KIAS. The hydraulic-load factor of 0.35 scales that modeled term; it is a selected artificial-feel approximation. |
| Master force gain | Starting value0.85 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| QBlend Enabled | Starting valueEnabled | What it controls and whyAllows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| QSpring Minimum Factor | Starting value0.55 | What it controls and whySets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| QSpring Start Knots | Starting value30 kt | What it controls and whySets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring response reference speed | Starting value100 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Force tuning speed/reference | Starting value260 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening gain | Starting value0.05 | What it controls and whyThe high-speed spring-stiffening gain is 0.05. It strengthens the permitted spring response above 100 KIAS, with the squared-speed ratio capped at 5. |
| Airspeed spring stiffening limit | Starting value5 | What it controls and whyLimits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | Starting value0.7 | What it controls and whyRoll and pitch aerodynamic scales are 0.7 and 0.75, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value0.75 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
| Trim feel | Starting valueEnabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueEnabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Elevator Authority | Starting value0.15 | What it controls and whyThe profile uses the trim behaviour configured below. Pitch authority 0.15 relieves permitted loading; hydraulic centre movement is off. Roll authority is 0.08. |
| Aileron Authority | Starting value0.08 | What it controls and whyScales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| Force Trim Enabled | Starting valueDisabled | What it controls and whyEnables local force trim, separate from aircraft-owned trim and add-on integration qualification. |
| GLoad Enabled | Starting valueEnabled | What it controls and whyAllows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| Rate Damping Enabled | Starting valueEnabled | What it controls and whyEnables rate damping with the configured coefficients and control law. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot follow authority | Starting value0.1 | What it controls and whySets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot neutral hold strength | Starting value0.6 | What it controls and whySets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Gain | Starting value0.23 | What it controls and whySets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Gain | Starting value0 | What it controls and whySets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Gain | Starting value0 | What it controls and whySets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Maximum flap index | Starting value3 | What it controls and whySets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Minimum flap index | Starting value2 | What it controls and whySets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Gain | Starting value0.045 | What it controls and whySets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Shaker Enabled | Starting valueDisabled | What it controls and whyPermits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Stick shaker amplitude | Starting value0.9 | What it controls and whySets triggered shaker strength; inactive while the shaker feature is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables ground effects; each still needs its own strength and contact or motion telemetry. |
| Gain | Starting value0.26 | What it controls and whySets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Gain | Starting value0.18 | What it controls and whySets gear-bump texture during ground motion, separate from touchdown impact. |
| Gain | Starting value0.38 | What it controls and whySets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Gain | Starting value0.08 | What it controls and whySets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Enabled | Starting valueEnabled | What it controls and whyEnables engine cues with nonzero settings and valid running-engine telemetry. |
| Gain | Starting value0.045 | What it controls and whySets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Enabled | Starting valueEnabled | What it controls and whyEnables accessory cues with configured strengths and observed accessory movement. |
| Gain | Starting value0.045 | What it controls and whySets texture from observed flap movement; a command without movement does not establish the cue. |
| Gain | Starting value0.05 | What it controls and whySets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Limits and open questions
- Force curves, gains and cue magnitudes are engineering estimates, not measured hand forces. Installed and physical acceptance remain deferred.
- AP follow and neutral hold remain off. No undocumented servo target, custom failure, control lock or maintenance-state channel is inferred.
- Historical Flysimware documentation corroborates airframe hydraulics only; it does not establish Contrail events, AP behavior or equipment implementation.
- Two-system hydraulic/ArthurQ failure response and ground elevator droop need qualified pressure/state telemetry and supervised hardware acceptance. Surface-follow and gravity drop remain off.
- No engine-specific reverse-force channel or slat/shaker protection contract is claimed; aggregate reverse texture is modest and generic spoiler effects are off.
Physical validation
No physical force validation is recorded in this public catalogue for this revision. Documentary review and software checks do not establish how a particular device feels.
Discuss this aircraft (0)
Questions, observations and useful sources from the community.
No published discussions yet. Bring a question or share a useful source.
Open aircraft discussions →Content expanded · What’s new
Something missing or a source that needs attention?
Suggest a correction ↗