Start here
A few places to begin, from the aircraft’s story to the people who fly it.
Meet the aircraft
A compact electric vertical-takeoff aircraft with an open single-seat cockpit. Microsoft lists Jetson One in the Standard tier. Aviator includes the lower edition tiers. The simulator edition is recorded separately from the real aircraft’s development or certification status.
Jetson ONE
Microsoft · Read more ↗Meet Jetson ONE
Jetson One is a compact electric vertical-takeoff aircraft with an open single-seat cockpit. Microsoft includes it in the MSFS 2024 Standard roster and the higher edition tiers, including Aviator.
Jetson ONE
Aircraft type designators
No type code selected for this entry yet.
History & design
From a prototype to a personal aircraft
Jetson began developing its prototype in late 2017 and reports its first crewed flight on 28 February 2018. The project pursued a single-person electric aircraft with computer-assisted controls, rather than a conventional helicopter cockpit.
Jetson · Prototype development and first crewed flight ↗Jetson retrospective, 24 May 2022
Systems & details
One hand commands the flight computer
The four-axis joystick commands altitude and direction through an electronic control system. Jetson describes hands-free hover and radar-assisted automatic landing. These are functions of its flight-control system; the published description does not specify a mechanical stick-force law.
Compact, with a short endurance envelope
The aluminium spaceframe surrounds the pilot, with eight propellers supplying lift. Folding reduces the width for storage. The approximately twenty-minute flight time and software speed limit are manufacturer figures; they describe a compact recreational aircraft rather than the range of a travelling aeroplane.
In your simulator
Systems, equipment and documentation for each developer’s aircraft.
Compare simulator versions →MSFS 2024Jetson One
Microsoft Flight Simulator · Released
Jetson One
Microsoft Flight Simulator · Released
X-Plane 12Jetson ONE
NHAdrian · Released
Jetson ONE
NHAdrian · Released
Manuals & resources
Find your next read
Choose a topic for a short introduction and a link to the original source. Simulator references identify the developer and edition they cover.
Developer documentation
Jetson ONE — product listingJetson ONE · X-Plane 12
Product listing captured 2026-09-24; edition scope from the reviewed catalogue
X-Plane.org authorized store · Read the source ↗Read the original documentation from the people who created it. Manuals open on their publisher’s website.
Manual
Jetson ONE simulator manualMicrosoft / aircraft developer · Official catalogue reviewed 15 September 2026Resource
MSFS 2024 official aircraft rosterMicrosoft · Official catalogue reviewed 15 September 2026Product
Jetson ONE manned eVTOL exact product classificationX-Plane.org authorized store · Product listing captured 2026-09-24; edition scope from the reviewed catalogueManufacturer documentation
Jetson ONE specificationsJetson · Jetson ONE manufacturer specification, retrieved October 2026Aircraft history
Prototype development and first crewed flightJetson · Jetson retrospective, 24 May 2022Built-in force-feedback profiles
Read the documentary basis, editable starting settings and remaining questions for the aircraft you fly. Each explanation refers to the exact profile revision shown.
Catalogue programme-20261022-v1 · 2 profile choices
NHAdrian Jetson ONE
NHAdrian · Free and Pro · Revision 3 · Inherited starting point
X-Plane 12
NHAdrian Jetson ONE: The fixed-centre response accompanies an electronically stabilized aircraft.
Jetson ONE
Free and Pro · Revision 1 · Partial review
MSFS 2024
Jetson ONE: The fixed-centre response accompanies an electronically stabilized aircraft.
NHAdrian Jetson ONE
NHAdrian Jetson ONE: The fixed-centre response accompanies an electronically stabilized aircraft.
Aircraft and simulator scope
- NHAdrian Jetson ONE · NHAdrian · X-Plane 12 · Add-on starting point
The simulator model and controls
Jetson One is a compact electric vertical-takeoff aircraft with an open single-seat cockpit. Microsoft includes it in the MSFS 2024 Standard roster and the higher edition tiers, including Aviator.
This profile selects NHAdrian Jetson ONE for X-Plane 12.
How this profile feels
The fixed-centre response accompanies an electronically stabilized aircraft. The spring stays independent of airspeed. Directed aerodynamic loading is omitted. Cyclic damping adds resistance to hardware motion.
Trim response is independent of individual motor thrust and battery state. Local force trim is off. Autopilot following is off.
Controls and trim
The Jetson ONE implementation uses electronic stabilization with separately modelled electric motors, controllers and batteries. Its custom flight-controller and propeller behaviour form the control context of that XP12 rendition.
The selected implementation
NHAdrian’s Jetson ONE models electronic flight stabilization with separate motors, ESCs and batteries, plus a ballistic rescue system.
About the values
The gains are normalized profile settings. They describe the chosen effect balance; hand force depends on the device and its output limits. IAS references are tuning values rather than operating limits. Physical acceptance of this revision remains pending.
Documentary review and sources
These decisions describe the documentary basis and remaining gaps for this revision. Aircraft documentation and a starting setting describe different kinds of evidence.
Aircraft and variant
InheritedThis profile selects NHAdrian Jetson ONE for X-Plane 12.
Flight controls
InheritedThe Jetson ONE implementation uses electronic stabilization with separately modelled electric motors, controllers and batteries. Its custom flight-controller and propeller behaviour form the control context of that XP12 rendition.
Trim
InheritedTrim response is independent of individual motor thrust and battery state. Local force trim is off. Autopilot following is off.
Autopilot and stability
InheritedAutopilot following is off; the configured spring and load retain the hardware feel.
Equipment
InheritedNHAdrian’s Jetson ONE models electronic flight stabilization with separate motors, ESCs and batteries, plus a ballistic rescue system.
Speeds and limits
InheritedThe indicated-speed references set the profile response scale; they are separate from aircraft operating limits.
Simulator integration
InheritedThe profile targets xplane12. Add-on-specific controls use only the supported references configured by this profile.
Force-feedback settings
InheritedThe settings define the profile’s effect balance. Device output limits affect physical hand force.
Starting settings and their rationale
These configured values are starting estimates. The explanations describe what each setting controls; physical validation appears separately below.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0.35 | What it controls and whyThe fixed-centre response accompanies an electronically stabilized aircraft. The baseline spring is 0.35. Low-speed spring blending is off. |
| Master force gain | Starting value0.8 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| Profile force gain | Starting value0 | What it controls and whyThe 0 gain omits sustained directed airspeed loading. Spring resistance remains independent. |
| Force tuning speed/reference | Starting value60 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Spring response reference speed | Starting value30.0 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Aileron force scale | Starting value1 | What it controls and whyRoll and pitch aerodynamic scales are 1 and 1, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value1 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Trim feel | Starting valueDisabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueDisabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
All 44 starting settings and their rationale
The settings define the profile’s effect balance. Device output limits affect physical hand force.
| Setting | Starting value | What it controls and why |
|---|---|---|
| Spring strength | Starting value0.35 | What it controls and whyThe fixed-centre response accompanies an electronically stabilized aircraft. The baseline spring is 0.35. Low-speed spring blending is off. |
| Spring deadband | Starting value0.02 | What it controls and whySets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Profile force gain | Starting value0 | What it controls and whyThe 0 gain omits sustained directed airspeed loading. Spring resistance remains independent. |
| Master force gain | Starting value0.8 | What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits. |
| QBlend Enabled | Starting valueDisabled | What it controls and whyAllows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| QSpring Minimum Factor | Starting value0.5 | What it controls and whySets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| QSpring Start Knots | Starting value8 kt | What it controls and whySets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring response reference speed | Starting value30.0 kt | What it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Force tuning speed/reference | Starting value60 kt | What it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening gain | Starting value0 | What it controls and whyAdds permitted spring resistance above the full-blend speed. Zero removes this high-speed increase. |
| Airspeed spring stiffening limit | Starting value5 | What it controls and whyLimits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | Starting value1 | What it controls and whyRoll and pitch aerodynamic scales are 1 and 1, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. No custom spring-travel curve is enabled. |
| Elevator force scale | Starting value1 | What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Output force limit | Starting value0.55 | What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate. |
| Trim feel | Starting valueDisabled | What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| Trim relief | Starting valueDisabled | What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| Elevator Authority | Starting value0 | What it controls and whyScales supported pitch-trim relief and permitted centre movement. Zero removes pitch response. |
| Aileron Authority | Starting value0 | What it controls and whyScales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| Force Trim Enabled | Starting valueDisabled | What it controls and whyTrim response is independent of individual motor thrust and battery state. Local force trim is off. The stored latch parameters are inactive; the profile does not supply a local hold-where-left neutral. |
| GLoad Enabled | Starting valueDisabled | What it controls and whyAllows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| Rate Damping Enabled | Starting valueDisabled | What it controls and whyEnables rate damping with the configured coefficients and control law. |
| Autopilot follow | Starting valueDisabled | What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot follow authority | Starting value0.1 | What it controls and whySets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot neutral hold | Starting valueDisabled | What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot neutral hold strength | Starting value0.6 | What it controls and whySets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Gain | Starting value0 | What it controls and whySets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Gain | Starting value0 | What it controls and whySets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Gain | Starting value0 | What it controls and whySets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Maximum flap index | Starting value3 | What it controls and whySets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Minimum flap index | Starting value2 | What it controls and whySets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Gain | Starting value0 | What it controls and whySets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Shaker Enabled | Starting valueDisabled | What it controls and whyPermits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Stick shaker amplitude | Starting value0.5 | What it controls and whySets triggered shaker strength; inactive while the shaker feature is disabled. |
| Enabled | Starting valueEnabled | What it controls and whyEnables ground effects; each still needs its own strength and contact or motion telemetry. |
| Gain | Starting value0 | What it controls and whySets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Gain | Starting value0 | What it controls and whySets gear-bump texture during ground motion, separate from touchdown impact. |
| Gain | Starting value0.2 | What it controls and whySets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Gain | Starting value0 | What it controls and whySets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Enabled | Starting valueDisabled | What it controls and whyEnables engine cues with nonzero settings and valid running-engine telemetry. |
| Gain | Starting value0 | What it controls and whySets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Enabled | Starting valueEnabled | What it controls and whyEnables accessory cues with configured strengths and observed accessory movement. |
| Gain | Starting value0 | What it controls and whySets texture from observed flap movement; a command without movement does not establish the cue. |
| Gain | Starting value0 | What it controls and whySets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Limits and open questions
- Modest fixed centering for electronic inceptor. No manual aerodynamic loading, conventional helicopter rotor torque or invented propeller-frequency vibration.
- The aircraft flight controller owns stabilization. Bridge local FTR/beep trim and automatic neutral shift remain off.
- No calibrated AP servo target is published. AP-follow and neutral hold remain disabled; mode indicators are not servo demand.
- Read-only motion and accessory telemetry. No guessed custom servo outputs, input compensation or hardware writes outside the production Armed force path. Installed identity remains unobserved. Public source does not publish force-neutral or custom rotor RPM signals; no guessed datarefs.
- 60 KIAS is an estimated control-feel reference, not cruise TAS, V-speeds or an operating limit.
- Spring 0.35, lateral scale 1, trim relief 0/0; editable estimates, not measured hand forces.
- Physical and installed-aircraft checks are deferred. Save this profile as the aircraft default if telemetry omits its developer or configuration.
- Only actual accessory-position changes drive movement textures. No pressure-dependent failures, guessed servo outputs or input compensation.
Physical validation
No physical force validation is recorded in this public catalogue for this revision. Documentary review and software checks do not establish how a particular device feels.
Discuss this aircraft (0)
Questions, observations and useful sources from the community.
No published discussions yet. Bring a question or share a useful source.
Open aircraft discussions →Content expanded · What’s new
Something missing or a source that needs attention?
Suggest a correction ↗
