MCDONNELL DOUGLAS / AIRLINER

McDonnell Douglas DC-9

Douglas developed the DC-9 as a short-range jet in the 1960s, with engines mounted at the rear of the fuselage.

+ Compare aircraft

Choose the version you fly to narrow the edition-specific reading.

Length104 ft
Wingspan89 ft
Height27 ft
Maximum takeoff mass91,500 lb
Delta seating65 passengers
EnginesTwo Pratt & Whitney JT8D-1
Simulator ecosystemsMSFS
YOUR AIRCRAFT COMPANION

Start here

A few places to begin, from the aircraft’s story to the people who fly it.

Aircraft history

Meet the aircraft

Douglas introduced the DC-9 in 1965 to serve short routes. Its rear-mounted twin-engine layout and two-crew flight deck helped make the many DC-9 versions economical for airlines. The simulator products below cover different members of that family and have their own edition details.

McDonnell Douglas DC-9

Smithsonian National Air and Space Museum · Read more ↗
THE AIRCRAFT

Meet McDonnell Douglas DC-9

Douglas introduced the DC-9 in 1965 for short-range routes. Its rear-mounted twin engines and two-crew flight deck supported economical airline operation. The family developed through numerous versions, several of which appear in separate simulator products.

FAMILY, MODELS & VARIANTS

McDonnell Douglas DC-9

McDonnell Douglas → · Explore the family →

Aircraft type designators

No type designator selected for this reference.

HOW IT CAME TO BE

History & design

Jet service for shorter routes

Delta introduced daily scheduled DC-9 service in December 1965, bringing jet transport to routes previously served by propeller aircraft. The short original DC-9 filled a different role from the airline’s larger DC-8 and Convair 880.

Delta Flight Museum · Douglas DC-9 1965-1993, 2008-2014 ↗

Delta Flight Museum: family history and DC-9-14 technical summary

The stretched nine

Delta received its first DC-9-32 in April 1967. Its fuselage was fifteen feet longer than the original model. The figures here are explicitly the earlier DC-9-14 reference; they do not describe the longer -32, -41 or -51.

Delta Flight Museum · Douglas DC-9 1965-1993, 2008-2014 ↗

Delta Flight Museum: family history and DC-9-14 technical summary

UNDER THE SKIN

Systems & details

Retirement was not the end of Delta’s story

The airline retired its early DC-9 fleet in 1993, then acquired more through the 2008 Northwest merger. Ceremonial farewell flights took place in January 2014, followed by a final service flight later that month. The MD-80, MD-90 and 717 continued the design’s broader lineage.

Delta Flight Museum: family history and DC-9-14 technical summary
Delta Flight Museum · Douglas DC-9 1965-1993, 2008-2014 ↗
VIRTUAL VERSIONS

In your simulator

Systems, equipment and documentation for each developer’s aircraft.

Compare simulator versions →
MSFS 2020 · MSFS 2024

DC-9-10 / -30 Passenger and Freighter

Sky Simulations · Released

MSFS 2020 · MSFS 2024Third-party add-on

Aircraft

Products and variants
ProductSimulatorProduct type
DC-9-10 / -30 Passenger and Freighter ↗ReleasedMSFS 2020 · MSFS 2024 Aircraft

Product and edition scope

Sky Simulations lists DC-9-10 / -30 Passenger and Freighter for MSFS 2020 · MSFS 2024. The linked listing was captured 28 September 2026.

Sky Simulations / Just Flight · Sky Simulations McDonnell Douglas DC-9 ↗

Product listing captured 28 September 2026; DC-9-10/30, MSFS 2020 and 2024

Control tabs and autoflight

The -10/30 listing describes aerodynamic elevator and aileron tabs and autoflight modes.

Sky Simulations / Just Flight · Sky Simulations McDonnell Douglas DC-9 ↗

Product page · aircraft, compatibility and autoflight

Different update tracks

Sky Simulations' release notes identify later DC-9 changes for MSFS 2024 only; the MSFS 2020 edition remains on an earlier version.

Sky Simulations / Just Flight · Sky Simulations DC-9 release changes ↗

Release notes captured 28 September 2026; v3.2.5 and v3.3.0

MSFS 2024

DC-9-21 / -41 / -51

Sky Simulations · Released

MSFS 2024Third-party add-on

Aircraft

Products and variants
ProductSimulatorProduct type
DC-9-21 / -41 / -51 ↗ReleasedMSFS 2024 Aircraft

Product and edition scope

Sky Simulations lists DC-9-21 / -41 / -51 for MSFS 2024. The linked listing was captured 28 September 2026.

Sky Simulations / Just Flight · Sky Simulations DC-9 Series 21, 41 and 51 ↗

Separate product listing captured 28 September 2026; MSFS 2024

Documented product features

This is a separate Sky Simulations purchase for the -21, -41 and -51 models. The listing names MSFS 2024 and describes aerodynamic control tabs and multiple autoflight modes. This listing covers MSFS 2024; the -10/30 package has separate edition support.

Sky Simulations / Just Flight · Sky Simulations DC-9 Series 21, 41 and 51 ↗

Separate product page · compatibility, aircraft and autoflight

GO TO THE SOURCE

Manuals & resources

Find your next read

Choose a topic for a short introduction and a link to the original source. Simulator references identify the developer and edition they cover.

Developer documentation

Sky Simulations McDonnell Douglas DC-9DC-9-10 / -30 Passenger and Freighter · MSFS 2020 · MSFS 2024

Read the developer document for this specific product and simulator edition.

Product listing captured 28 September 2026; DC-9-10/30, MSFS 2020 and 2024

Sky Simulations / Just Flight · Read the source ↗
Sky Simulations DC-9 release changesDC-9-10 / -30 Passenger and Freighter · MSFS 2020 · MSFS 2024

Read the developer document for this specific product and simulator edition.

Release notes captured 28 September 2026; v3.2.5 and v3.3.0

Sky Simulations / Just Flight · Read the source ↗
Sky Simulations DC-9 Series 21, 41 and 51DC-9-21 / -41 / -51 · MSFS 2024

Read the developer document for this specific product and simulator edition.

Separate product listing captured 28 September 2026; MSFS 2024

Sky Simulations / Just Flight · Read the source ↗

Read the original documentation from the people who created it. Manuals open on their publisher’s website.

Museum aircraft history

↗Trans-Texas Airlines Douglas DC-9Smithsonian National Air and Space Museum · Museum aircraft-history caption captured 29 September 2026; Douglas DC-9 design and 1965 introduction

Developer documentation

↗Sky Simulations McDonnell Douglas DC-9Sky Simulations / Just Flight · Product listing captured 28 September 2026; DC-9-10/30, MSFS 2020 and 2024 ↗Sky Simulations DC-9 release changesSky Simulations / Just Flight · Release notes captured 28 September 2026; v3.2.5 and v3.3.0 ↗Sky Simulations DC-9 Series 21, 41 and 51Sky Simulations / Just Flight · Separate product listing captured 28 September 2026; MSFS 2024

Aircraft reference

↗Douglas DC-9 1965-1993, 2008-2014Delta Flight Museum · Delta Flight Museum: family history and DC-9-14 technical summary
AIRCRAFT AND FEEL

Built-in force-feedback profiles

Read the documentary basis, editable starting settings and remaining questions for the aircraft you fly. Each explanation refers to the exact profile revision shown.

Catalogue programme-20261022-v1 · 2 profile choices

FFB-BRIDGE BUILT-IN PROFILE

Sky Simulations DC-9-21 / DC-9-41 / DC-9-51

Free and ProRevision 2Inherited starting point

Douglas developed the DC-9 as a short-range jet in the 1960s, with engines mounted at the rear of the fuselage.

Aircraft and simulator scope

  • Sky Simulations DC-9-21 / DC-9-41 / DC-9-51 · Sky Simulations · MSFS 2024 · Add-on starting point

The simulator model and controls

Sky Simulations DC-9-21 / DC-9-41 / DC-9-51 is the selected Sky Simulations configuration.

How this profile feels

Spring resistance builds with the selected airspeed response. A separate aerodynamic term adds speed-dependent control load.

Pitch-trim relief is off. Autopilot following is off.

Aircraft and configuration

Douglas introduced the DC-9 in 1965 for short-range routes. Its rear-mounted twin engines and two-crew flight deck supported economical airline operation. The family developed through numerous versions, several of which appear in separate simulator products.

About the values

Strengths are normalized hardware-feel settings. They set the effect balance; hand force depends on the device and its limits. The IAS reference is a tuning value.

Documentary review and sources

These decisions describe the documentary basis and remaining gaps for this revision. Aircraft documentation and a starting setting describe different kinds of evidence.

Aircraft and variant
Inherited

Sky Simulations DC-9-21 / DC-9-41 / DC-9-51 is the selected Sky Simulations configuration.

Flight controls
Inherited

Douglas developed the DC-9 as a short-range jet in the 1960s, with engines mounted at the rear of the fuselage.

Trim
Inherited

The profile uses the trim behaviour configured below. Pitch relief is off, with stored authority 0; roll authority is 0.

Autopilot and stability
Inherited

Autopilot following is off; the configured spring and load retain the hardware feel.

Equipment
Inherited

Douglas introduced the DC-9 in 1965 for short-range routes. Its rear-mounted twin engines and two-crew flight deck supported economical airline operation. The family developed through numerous versions, several of which appear in separate simulator products.

Speeds and limits
Inherited

The indicated-speed references set the profile response scale; they are separate from aircraft operating limits.

Simulator integration
Inherited

The profile targets msfs2024. Add-on-specific controls use only the supported references configured by this profile.

Force-feedback settings
Inherited

The settings define the profile’s effect balance. Device output limits affect physical hand force.

Starting settings and their rationale

These configured values are starting estimates. The explanations describe what each setting controls; physical validation appears separately below.

Estimated starting settings · revision 2
SettingStarting valueWhat it controls and why
Spring strengthStarting value0.55 What it controls and whyThis profile uses reversible-control loading for McDonnell Douglas DC-9. The baseline spring is 0.55. Its low-speed blend reaches baseline strength at 65 KIAS.
Master force gainStarting value0.85 What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits.
Profile force gainStarting value0.3 What it controls and whyThe aerodynamic-load gain is 0.3 with an indicated-speed reference of 250 KIAS. This supplies speed-dependent loading alongside the spring.
Force tuning speed/referenceStarting value250 ktWhat it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Spring response reference speedStarting value65 ktWhat it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Aileron force scaleStarting value0.8 What it controls and whyRoll and pitch aerodynamic scales are 0.8 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.
Elevator force scaleStarting value1 What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Trim feelStarting valueDisabled What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
Trim reliefStarting valueDisabled What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
Autopilot followStarting valueDisabled What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel.
Autopilot neutral holdStarting valueDisabled What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target.
Output force limitStarting value0.55 What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate.
All 44 starting settings and their rationale

The settings define the profile’s effect balance. Device output limits affect physical hand force.

Estimated starting settings · revision 2
SettingStarting valueWhat it controls and why
Spring strengthStarting value0.55 What it controls and whyThis profile uses reversible-control loading for McDonnell Douglas DC-9. The baseline spring is 0.55. Its low-speed blend reaches baseline strength at 65 KIAS.
Spring deadbandStarting value0.035 What it controls and whySets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Profile force gainStarting value0.3 What it controls and whyThe aerodynamic-load gain is 0.3 with an indicated-speed reference of 250 KIAS. This supplies speed-dependent loading alongside the spring.
Master force gainStarting value0.85 What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits.
QBlend EnabledStarting valueEnabled What it controls and whyAllows baseline spring strength to rise with indicated airspeed where the control law permits it.
QSpring Minimum FactorStarting value0.55 What it controls and whySets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
QSpring Start KnotsStarting value8 ktWhat it controls and whySets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
Spring response reference speedStarting value65 ktWhat it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Force tuning speed/referenceStarting value250 ktWhat it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Airspeed spring stiffening gainStarting value0.12 What it controls and whyThe high-speed spring-stiffening gain is 0.12. It strengthens the permitted spring response above 65 KIAS, with the squared-speed ratio capped at 5.
Airspeed spring stiffening limitStarting value5 What it controls and whyLimits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Aileron force scaleStarting value0.8 What it controls and whyRoll and pitch aerodynamic scales are 0.8 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.
Elevator force scaleStarting value1 What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Output force limitStarting value0.55 What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate.
Trim feelStarting valueDisabled What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
Trim reliefStarting valueDisabled What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
Elevator AuthorityStarting value0 What it controls and whyThe profile uses the trim behaviour configured below. Pitch relief is off, with stored authority 0; roll authority is 0.
Aileron AuthorityStarting value0 What it controls and whyScales supported roll-trim relief and permitted centre movement. Zero removes roll response.
Force Trim EnabledStarting valueDisabled What it controls and whyEnables local force trim, separate from aircraft-owned trim and add-on integration qualification.
GLoad EnabledStarting valueDisabled What it controls and whyAllows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
Rate Damping EnabledStarting valueDisabled What it controls and whyEnables rate damping with the configured coefficients and control law.
Autopilot followStarting valueDisabled What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel.
Autopilot follow authorityStarting value0.1 What it controls and whySets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Autopilot neutral holdStarting valueDisabled What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target.
Autopilot neutral hold strengthStarting value0.6 What it controls and whySets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
EnabledStarting valueEnabled What it controls and whyEnables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
GainStarting value0 What it controls and whySets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
GainStarting value0 What it controls and whySets high-Mach buffet strength; onset and full-strength thresholds are separate.
GainStarting value0 What it controls and whySets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Maximum flap indexStarting value0 What it controls and whySets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Minimum flap indexStarting value2 What it controls and whySets the first flap detent that admits buffet; this is a handle index, not degrees.
GainStarting value0 What it controls and whySets gear aerodynamic buffet; movement and ground-contact cues are separate.
Shaker EnabledStarting valueDisabled What it controls and whyPermits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Stick shaker amplitudeStarting value0.9 What it controls and whySets triggered shaker strength; inactive while the shaker feature is disabled.
EnabledStarting valueEnabled What it controls and whyEnables ground effects; each still needs its own strength and contact or motion telemetry.
GainStarting value0.16 What it controls and whySets rolling texture strength, modified by speed, surface and undercarriage configuration.
GainStarting value0.12 What it controls and whySets gear-bump texture during ground motion, separate from touchdown impact.
GainStarting value0.3 What it controls and whySets landing-impact strength; landing telemetry and response shape determine the pulse.
GainStarting value0 What it controls and whySets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
EnabledStarting valueEnabled What it controls and whyEnables engine cues with nonzero settings and valid running-engine telemetry.
GainStarting value0.06 What it controls and whySets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
EnabledStarting valueEnabled What it controls and whyEnables accessory cues with configured strengths and observed accessory movement.
GainStarting value0.12 What it controls and whySets texture from observed flap movement; a command without movement does not establish the cue.
GainStarting value0.12 What it controls and whySets texture from observed gear movement, separate from aerodynamic and touchdown effects.
Limits and open questions
  • Documentary starting point; installed-title capture and physical force acceptance are pending.
  • Force amplitudes, damping and speed response are editable engineering estimates, not measured hand forces.
  • No verified custom servo-target, trim geometry or hydraulic-failure interface. Autopilot follow, neutral hold, trim relief and hydraulic-loss forces remain off.
  • Developer-qualified matching is based on documented product names. Save an aircraft default if live telemetry omits the developer.
  • MSFS 2020 is not documented for this package. No separate calibration is implied for 21, 41 and 51 variants.
  • Included operations and speeds PDFs were not acquired; control-tab gearing and trim geometry remain unqualified.
  • Inherited force magnitudes remain editable estimates; aircraft-specific settings for speed response, controls, trim, autopilot and enabled effects are retained. New physical feel acceptance is pending.

Physical validation

No physical force validation is recorded in this public catalogue for this revision. Documentary review and software checks do not establish how a particular device feels.

FFB-Bridge maintains this profile’s revisions and tuning discussion.

Revision 2 and download availability in FFB-Bridge ↗
Exact profile identity
Profile
addon-skysim-dc9-21-41-51
Artifact SHA-256
5fdf63e44e94111152b7844b3f836fcb4aa0221665a5f7a231c0f07fc53b098e
Bytes
13522
Spring strength
Forces.SpringStrength
Spring deadband
Forces.SpringDeadband
Profile force gain
Forces.ForceGain
Master force gain
Forces.MasterGain
QBlend Enabled
Forces.QBlendEnabled
QSpring Minimum Factor
Forces.QSpringMinimumFactor
QSpring Start Knots
Forces.QSpringStartKnots
Spring response reference speed
Forces.QSpringFullKnots
Force tuning speed/reference
Forces.CruiseSpeedRefKnots
Airspeed spring stiffening gain
Forces.SpringAirspeedStiffenGain
Airspeed spring stiffening limit
Forces.SpringAirspeedStiffenCap
Aileron force scale
Forces.AileronForceScale
Elevator force scale
Forces.ElevatorForceScale
Output force limit
Forces.MaxOutputForce
Trim feel
StickFeel.TrimFeelEnabled
Trim relief
StickFeel.TrimReliefEnabled
Elevator Authority
StickFeel.TrimRelief.ElevatorAuthority
Aileron Authority
StickFeel.TrimRelief.AileronAuthority
Force Trim Enabled
StickFeel.ForceTrimEnabled
GLoad Enabled
StickFeel.GLoadEnabled
Rate Damping Enabled
StickFeel.RateDampingEnabled
Autopilot follow
Autopilot.FollowEnabled
Autopilot follow authority
Autopilot.FollowAuthority
Autopilot neutral hold
Autopilot.NeutralHoldEnabled
Autopilot neutral hold strength
Autopilot.NeutralHoldStrength
Enabled
Aero.Enabled
Gain
Aero.Stall.Gain
Gain
Aero.Mach.Gain
Gain
Aero.Flap.Gain
Maximum flap index
Aero.Flap.MaxFlapIndex
Minimum flap index
Aero.Flap.MinFlapIndex
Gain
Aero.Gear.Gain
Shaker Enabled
Aero.ShakerEnabled
Stick shaker amplitude
Aero.Shaker.Amplitude
Enabled
Ground.Enabled
Gain
Ground.Rumble.Gain
Gain
Ground.Bumps.Gain
Gain
Ground.Thump.Gain
Gain
Ground.Reverse.Gain
Enabled
Engine.Enabled
Gain
Engine.Rumble.Gain
Enabled
Mechanical.Enabled
Gain
Mechanical.FlapMotion.Gain
Gain
Mechanical.GearMotion.Gain
Explore all built-in profile references →

Content expanded · What’s new

Something missing or a source that needs attention?

Suggest a correction ↗