RANS / LIGHT SPORT

RANS S-6S Coyote II

The RANS S-6S is a high-wing, two-seat light aircraft.

+ Compare aircraft

Choose the version you fly to narrow the edition-specific reading.

Wingspan30 ft 4 in
Length20 ft 9 in
SeatsTwo
Fuel capacity18 US gal
Maximum mass1,320 lb
EnginesRotax 912 UL 80 hp / 912 ULS 100 hp
Simulator ecosystemsMSFS
YOUR AIRCRAFT COMPANION

Start here

A few places to begin, from the aircraft’s story to the people who fly it.

THE AIRCRAFT

Meet RANS S-6S Coyote II

The RANS S-6S is a high-wing, two-seat light aircraft.

FAMILY, MODELS & VARIANTS

RANS S-6S Coyote II

RANS → · Explore the family →

Aircraft type designators

No type designator selected for this reference.

HOW IT CAME TO BE

History & design

A Coyote with several operating configurations

The S-6S specification sheet offers both tailwheel and tricycle undercarriages and two Rotax power options. It describes a light two-seat aircraft whose equipment can be selected for different kinds of recreational operation. Those choices are part of the aircraft identity, not interchangeable performance figures.

RANS Designs, via RMK distributor · RANS S-6S specification sheet, 10 October 2018 ↗

RANS S-6S specification sheet, 10 October 2018; standard landplane.

The MSFS recreation

FlyBoy expanded the recreation into a native MSFS 2024 release listed from April 2025, with tricycle, bush-wheel, tailwheel and amphibious versions. Its 100 hp 912 ULS fit and simulated wear systems describe that package, rather than every owner-built S-6S.

contrail.shop · Rans S6S — separate-native-2024-listing ↗

FlyBoy simulator release and configuration.

UNDER THE SKIN

Systems & details

Keep the engine and undercarriage scope

The manufacturer publishes separate climb and cruise figures for the 80 hp and 100 hp engines, and different overall heights for the two wheel arrangements. The base dimensions and weights here come from the 2018 landplane sheet; they do not establish an amphibian weight or water performance.

RANS S-6S specification sheet, 10 October 2018; standard landplane.
RANS Designs, via RMK distributor · RANS S-6S specification sheet, 10 October 2018 ↗
VIRTUAL VERSIONS

In your simulator

Systems, equipment and documentation for each developer’s aircraft.

MSFS 2020 · MSFS 2024

Rans S6S

FlyBoy Simulations · Released

MSFS 2020 · MSFS 2024Third-party add-on

Aircraft

Products and variants
ProductSimulatorProduct type
Rans S6S — MSFS 2020 legacy ↗ReleasedMSFS 2020 Legacy and native MSFS 2024 listings are separate products; an upgrade mention is not a shared purchase.Aircraft
Rans S6S — MSFS 2024 native ↗ReleasedMSFS 2024 Legacy and native MSFS 2024 listings are separate products; an upgrade mention is not a shared purchase.Aircraft

Legacy and native MSFS 2024 listings are separate products; an upgrade mention is not a shared purchase.

GO TO THE SOURCE

Manuals & resources

Find your next read

Choose a topic for a short introduction and a link to the original source. Simulator references identify the developer and edition they cover.

Manufacturer, developer or authorized-product aircraft context

RANS S-6S Coyote II — aircraft backgroundRANS S-6S Coyote II

Background on the high-wing, two-seat RANS S-6S Coyote II.

Aircraft-context passage, preserved text line 81; reviewed 2026-09-29

contrail.shop · Read the source ↗

Developer documentation

Rans S6S — product listingRans S6S · MSFS 2020 · MSFS 2024

Separate product listing; preserved source text line 139; reviewed 2026-09-29

contrail.shop · Read the source ↗
Rans S6S — product listingRans S6S · MSFS 2020 · MSFS 2024

Separate product listing; preserved source text line 65; reviewed 2026-09-29

contrail.shop · Read the source ↗

Read the original documentation from the people who created it. Manuals open on their publisher’s website.

Manufacturer, developer or authorized-product aircraft context

↗RANS S-6S Coyote II — aircraft backgroundcontrail.shop · Aircraft-context passage, preserved text line 81; reviewed 2026-09-29

Product

↗Rans S6S — legacy-2020-listingcontrail.shop · Separate product listing; preserved source text line 139; reviewed 2026-09-29

Aircraft documentation

↗RANS S-6S specification sheet, 10 October 2018RANS Designs, via RMK distributor · RANS S-6S specification sheet, 10 October 2018; standard landplane.
AIRCRAFT AND FEEL

Built-in force-feedback profiles

Read the documentary basis, editable starting settings and remaining questions for the aircraft you fly. Each explanation refers to the exact profile revision shown.

Catalogue programme-20261022-v1 · 4 profile choices

FFB-BRIDGE BUILT-IN PROFILE

FlyBoy RANS S6S Coyote II

Free and ProRevision 3Inherited starting point

The RANS S-6S is a high-wing, two-seat light aircraft.

Aircraft and simulator scope

  • FlyBoy RANS S6S Coyote II · FlyBoy Simulations · MSFS 2020 · Add-on starting point
  • FlyBoy RANS S6S Coyote II · FlyBoy Simulations · MSFS 2024 · Add-on starting point

The simulator model and controls

FlyBoy RANS S6S Coyote II is the selected FlyBoy Simulations configuration.

How this profile feels

Spring resistance builds with the selected airspeed response. A separate aerodynamic term adds speed-dependent control load.

Valid trim provides the configured pressure relief. Autopilot following is off.

Aircraft and configuration

The RANS S-6S is a high-wing, two-seat light aircraft.

About the values

Strengths are normalized hardware-feel settings. They set the effect balance; hand force depends on the device and its limits. The IAS reference is a tuning value.

Documentary review and sources

These decisions describe the documentary basis and remaining gaps for this revision. Aircraft documentation and a starting setting describe different kinds of evidence.

Aircraft and variant
Inherited

FlyBoy RANS S6S Coyote II is the selected FlyBoy Simulations configuration.

Flight controls
Inherited

The RANS S-6S is a high-wing, two-seat light aircraft.

Trim
Inherited

The profile uses the trim behaviour configured below. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.

Autopilot and stability
Inherited

Autopilot following is off; the configured spring and load retain the hardware feel.

Equipment
Inherited

The RANS S-6S is a high-wing, two-seat light aircraft.

Speeds and limits
Inherited

The indicated-speed references set the profile response scale; they are separate from aircraft operating limits.

Simulator integration
Inherited

The profile targets msfs2020, msfs2024. Add-on-specific controls use only the supported references configured by this profile.

Force-feedback settings
Inherited

The settings define the profile’s effect balance. Device output limits affect physical hand force.

Starting settings and their rationale

These configured values are starting estimates. The explanations describe what each setting controls; physical validation appears separately below.

Estimated starting settings · revision 3
SettingStarting valueWhat it controls and why
Spring strengthStarting value0.74 What it controls and whyThis profile uses reversible-control loading for RANS S-6S Coyote II. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 42.5 KIAS.
Master force gainStarting value0.85 What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits.
Profile force gainStarting value0.8 What it controls and whyThe aerodynamic-load gain is 0.8 with an indicated-speed reference of 85 KIAS. This supplies speed-dependent loading alongside the spring.
Force tuning speed/referenceStarting value85 ktWhat it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Spring response reference speedStarting value42.5 ktWhat it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Aileron force scaleStarting value0.68 What it controls and whyRoll and pitch aerodynamic scales are 0.68 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.
Elevator force scaleStarting value1 What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Trim feelStarting valueDisabled What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
Trim reliefStarting valueEnabled What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
Autopilot followStarting valueDisabled What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel.
Autopilot neutral holdStarting valueDisabled What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target.
Output force limitStarting value0.55 What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate.
All 44 starting settings and their rationale

The settings define the profile’s effect balance. Device output limits affect physical hand force.

Estimated starting settings · revision 3
SettingStarting valueWhat it controls and why
Spring strengthStarting value0.74 What it controls and whyThis profile uses reversible-control loading for RANS S-6S Coyote II. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 42.5 KIAS.
Spring deadbandStarting value0.045 What it controls and whySets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Profile force gainStarting value0.8 What it controls and whyThe aerodynamic-load gain is 0.8 with an indicated-speed reference of 85 KIAS. This supplies speed-dependent loading alongside the spring.
Master force gainStarting value0.85 What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits.
QBlend EnabledStarting valueEnabled What it controls and whyAllows baseline spring strength to rise with indicated airspeed where the control law permits it.
QSpring Minimum FactorStarting value0.5 What it controls and whySets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
QSpring Start KnotsStarting value8 ktWhat it controls and whySets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
Spring response reference speedStarting value42.5 ktWhat it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Force tuning speed/referenceStarting value85 ktWhat it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Airspeed spring stiffening gainStarting value0.15 What it controls and whyThe high-speed spring-stiffening gain is 0.15. It strengthens the permitted spring response above 42.5 KIAS, with the squared-speed ratio capped at 5.
Airspeed spring stiffening limitStarting value5 What it controls and whyLimits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Aileron force scaleStarting value0.68 What it controls and whyRoll and pitch aerodynamic scales are 0.68 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.
Elevator force scaleStarting value1 What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Output force limitStarting value0.55 What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate.
Trim feelStarting valueDisabled What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
Trim reliefStarting valueEnabled What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
Elevator AuthorityStarting value0.3 What it controls and whyThe profile uses the trim behaviour configured below. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.
Aileron AuthorityStarting value0 What it controls and whyScales supported roll-trim relief and permitted centre movement. Zero removes roll response.
Force Trim EnabledStarting valueDisabled What it controls and whyEnables local force trim, separate from aircraft-owned trim and add-on integration qualification.
GLoad EnabledStarting valueEnabled What it controls and whyAllows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
Rate Damping EnabledStarting valueEnabled What it controls and whyEnables rate damping with the configured coefficients and control law.
Autopilot followStarting valueDisabled What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel.
Autopilot follow authorityStarting value0.1 What it controls and whySets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Autopilot neutral holdStarting valueDisabled What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target.
Autopilot neutral hold strengthStarting value0.6 What it controls and whySets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
EnabledStarting valueEnabled What it controls and whyEnables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
GainStarting value0.35 What it controls and whySets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
GainStarting value0 What it controls and whySets high-Mach buffet strength; onset and full-strength thresholds are separate.
GainStarting value0 What it controls and whySets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Maximum flap indexStarting value3 What it controls and whySets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Minimum flap indexStarting value2 What it controls and whySets the first flap detent that admits buffet; this is a handle index, not degrees.
GainStarting value0 What it controls and whySets gear aerodynamic buffet; movement and ground-contact cues are separate.
Shaker EnabledStarting valueDisabled What it controls and whyPermits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Stick shaker amplitudeStarting value0.5 What it controls and whySets triggered shaker strength; inactive while the shaker feature is disabled.
EnabledStarting valueEnabled What it controls and whyEnables ground effects; each still needs its own strength and contact or motion telemetry.
GainStarting value0.4 What it controls and whySets rolling texture strength, modified by speed, surface and undercarriage configuration.
GainStarting value0.25 What it controls and whySets gear-bump texture during ground motion, separate from touchdown impact.
GainStarting value0.65 What it controls and whySets landing-impact strength; landing telemetry and response shape determine the pulse.
GainStarting value0 What it controls and whySets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
EnabledStarting valueEnabled What it controls and whyEnables engine cues with nonzero settings and valid running-engine telemetry.
GainStarting value0.12 What it controls and whySets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
EnabledStarting valueEnabled What it controls and whyEnables accessory cues with configured strengths and observed accessory movement.
GainStarting value0.12 What it controls and whySets texture from observed flap movement; a command without movement does not establish the cue.
GainStarting value0 What it controls and whySets texture from observed gear movement, separate from aerodynamic and touchdown effects.
Limits and open questions
  • FlyBoy RANS S6S Coyote II; msfs2020, msfs2024. Previously observed titles and implementation identifiers are retained; installed matching remains deferred.
  • Manual light-sport stick with low spring and IAS loading. Separate wheel arrangements do not imply measured stick-force differences.
  • Pitch trim relationship remains an estimate; no invented aileron trim or automatic simulator input compensation.
  • Developer documents autopilot functionality but no calibrated servo output. Navigation choice does not qualify physical following. AP servo-follow and neutral hold remain disabled; engagement indicators are not force-demand signals.
  • Rotax912ULS piston with fixed wheel baseline and flaps; trike/taildragger/bush-wheel configurations share this control profile. The2024 amphibian requires a separate water-contact preset.
  • 85 KIAS is an estimated feel reference, not cruise TAS or a certified limit. No invented Mach, VNE or weight scheduling.
  • Read-only native telemetry for aircraft motion and accessory positions. Custom switches, display animations and mode lamps are not calibrated servo targets. No unverified LVars/datarefs or simulator writes.
  • Spring 0.74; lateral scale 0.68; trim authorities 0.3/0; per-axis output cap 0.55. Editable engineering estimates, not measured hand forces. No body-rate torque, surface following or fabricated hydraulic-failure loads.
  • New physical and installed-product checks deferred by owner. Existing separately recorded acceptance retains its original device, simulator, add-on and version limits. Source review does not broaden custom telemetry acceptance.
  • Only actual accessory position changes drive movement texture; static drag and command-triggered kicks are disabled. Select and save an aircraft default when telemetry lacks a discriminating developer/configuration identity.

Physical validation

No physical force validation is recorded in this public catalogue for this revision. Documentary review and software checks do not establish how a particular device feels.

FFB-Bridge maintains this profile’s revisions and tuning discussion.

Revision 3 and download availability in FFB-Bridge ↗
Exact profile identity
Profile
addon-flyboy-rans
Artifact SHA-256
24281b5b814b7a46a0c29dc49055b4fc3b4ff5dc4ae53e5f37cd487afd5e7724
Bytes
14358
Spring strength
Forces.SpringStrength
Spring deadband
Forces.SpringDeadband
Profile force gain
Forces.ForceGain
Master force gain
Forces.MasterGain
QBlend Enabled
Forces.QBlendEnabled
QSpring Minimum Factor
Forces.QSpringMinimumFactor
QSpring Start Knots
Forces.QSpringStartKnots
Spring response reference speed
Forces.QSpringFullKnots
Force tuning speed/reference
Forces.CruiseSpeedRefKnots
Airspeed spring stiffening gain
Forces.SpringAirspeedStiffenGain
Airspeed spring stiffening limit
Forces.SpringAirspeedStiffenCap
Aileron force scale
Forces.AileronForceScale
Elevator force scale
Forces.ElevatorForceScale
Output force limit
Forces.MaxOutputForce
Trim feel
StickFeel.TrimFeelEnabled
Trim relief
StickFeel.TrimReliefEnabled
Elevator Authority
StickFeel.TrimRelief.ElevatorAuthority
Aileron Authority
StickFeel.TrimRelief.AileronAuthority
Force Trim Enabled
StickFeel.ForceTrimEnabled
GLoad Enabled
StickFeel.GLoadEnabled
Rate Damping Enabled
StickFeel.RateDampingEnabled
Autopilot follow
Autopilot.FollowEnabled
Autopilot follow authority
Autopilot.FollowAuthority
Autopilot neutral hold
Autopilot.NeutralHoldEnabled
Autopilot neutral hold strength
Autopilot.NeutralHoldStrength
Enabled
Aero.Enabled
Gain
Aero.Stall.Gain
Gain
Aero.Mach.Gain
Gain
Aero.Flap.Gain
Maximum flap index
Aero.Flap.MaxFlapIndex
Minimum flap index
Aero.Flap.MinFlapIndex
Gain
Aero.Gear.Gain
Shaker Enabled
Aero.ShakerEnabled
Stick shaker amplitude
Aero.Shaker.Amplitude
Enabled
Ground.Enabled
Gain
Ground.Rumble.Gain
Gain
Ground.Bumps.Gain
Gain
Ground.Thump.Gain
Gain
Ground.Reverse.Gain
Enabled
Engine.Enabled
Gain
Engine.Rumble.Gain
Enabled
Mechanical.Enabled
Gain
Mechanical.FlapMotion.Gain
Gain
Mechanical.GearMotion.Gain
Explore all built-in profile references →

Content expanded · What’s new

Something missing or a source that needs attention?

Suggest a correction ↗