LOCKHEED MARTIN / MILITARY JET

Lockheed Martin F-35 Lightning II

The F-35B is the short-takeoff and vertical-landing variant of the F-35 Lightning II.

+ Compare aircraft

Choose the version you fly to narrow the edition-specific reading.

EnginePratt & Whitney F135-PW-100
Thrust43,000 lbf
Wingspan35 ft
Length51 ft
Maximum takeoff weight70,000 lb class
Internal fuel18,498 lb
Maximum speedMach 1.6
Simulator ecosystemsX-Plane
YOUR AIRCRAFT COMPANION

Start here

A few places to begin, from the aircraft’s story to the people who fly it.

THE AIRCRAFT

Meet Lockheed Martin F-35 Lightning II

The F-35B is the short-takeoff and vertical-landing variant of the F-35 Lightning II.

FAMILY, MODELS & VARIANTS

Lockheed Martin F-35 Lightning II

Lockheed Martin → · Explore the family →

Aircraft type designators

No type designator selected for this reference.

HOW IT CAME TO BE

History & design

The B demonstrates vertical landing

Graham Tomlinson made the F-35B’s first vertical landing at Patuxent River on 18 March 2010. Shipboard vertical landings followed in October 2011, extending testing to the variant’s intended operating environment.

Lockheed Martin · F-35B history ↗

F-35B milestones

The vertical-landing test milestone

Lockheed Martin’s account follows Graham Tomlinson’s March 2010 test through a sustained hover at 150 feet and a touchdown at Patuxent River. That event demonstrated the B-model’s vertical-landing configuration after earlier flight testing, rather than describing a capability shared by all F-35s. The subsequent shipboard work brought the aircraft into a different test environment. These steps explain why the B deserves a separate operating description from the conventional-takeoff A and carrier C.

Lockheed Martin · F-35B history ↗

Manufacturer F-35B development account

UNDER THE SKIN

Systems & details

Vertical landing belongs to the B

The B variant redirects engine thrust and uses its lift system for short takeoff and vertical landing. That capability is variant-specific: the A-model dimensions and fuel figures above do not establish B-model hover performance.

STOVL variant scope
Lockheed Martin · F-35B history ↗
VIRTUAL VERSIONS

In your simulator

Systems, equipment and documentation for each developer’s aircraft.

X-Plane 12

F-35B Lightning II

AOA Simulations · Released

X-Plane 12Third-party add-on

Aircraft

Products and variants
ProductSimulatorProduct type
F-35B Lightning II ↗ReleasedX-Plane 12 Aircraft
GO TO THE SOURCE

Manuals & resources

Find your next read

Choose a topic for a short introduction and a link to the original source. Simulator references identify the developer and edition they cover.

Manufacturer, developer or authorized-product aircraft context

Lockheed Martin F-35 Lightning II — aircraft backgroundLockheed Martin F-35 Lightning II

Background on the F-35 Lightning II family; this aircraft entry represents the short-takeoff and vertical-landing F-35B.

Aircraft-context passage, preserved text line 295; reviewed 2026-09-29

www.lockheedmartin.com · Read the source ↗

Developer documentation

F-35B Lightning II — product listingF-35B Lightning II · X-Plane 12

Individual product listing and edition passage reviewed 2026-09-29

store.x-plane.org · Read the source ↗

Read the original documentation from the people who created it. Manuals open on their publisher’s website.

Manufacturer, developer or authorized-product aircraft context

↗Lockheed Martin F-35 Lightning II — aircraft backgroundwww.lockheedmartin.com · Aircraft-context passage, preserved text line 295; reviewed 2026-09-29

Product

↗F-35B Lightning IIstore.x-plane.org · Individual product listing and edition passage reviewed 2026-09-29

Aircraft reference

↗F-35A Lightning II fact sheetUS Air Force Air Combat Command · Air Combat Command F-35A fact sheet; conventional-takeoff variant
AIRCRAFT AND FEEL

Built-in force-feedback profiles

Read the documentary basis, editable starting settings and remaining questions for the aircraft you fly. Each explanation refers to the exact profile revision shown.

Catalogue programme-20261022-v1 · 4 profile choices

FFB-BRIDGE BUILT-IN PROFILE

IndiaFoxtEcho F-35A Lightning II

Free and ProRevision 1Inherited starting point

The F-35B is the short-takeoff and vertical-landing variant of the F-35 Lightning II.

Aircraft and simulator scope

  • IndiaFoxtEcho F-35A Lightning II · IndiaFoxtEcho · MSFS 2020 · Add-on starting point
  • IndiaFoxtEcho F-35A Lightning II · IndiaFoxtEcho · MSFS 2024 · Add-on starting point

The simulator model and controls

IndiaFoxtEcho F-35A Lightning II is the selected IndiaFoxtEcho configuration.

How this profile feels

The spring stays independent of airspeed. Directed aerodynamic loading is omitted.

Pitch-trim relief is off. Autopilot following is off.

Aircraft and configuration

The F-35B is the short-takeoff and vertical-landing variant of the F-35 Lightning II.

About the values

Strengths are normalized hardware-feel settings. They set the effect balance; hand force depends on the device and its limits. The IAS reference is a tuning value.

Documentary review and sources

These decisions describe the documentary basis and remaining gaps for this revision. Aircraft documentation and a starting setting describe different kinds of evidence.

Aircraft and variant
Inherited

IndiaFoxtEcho F-35A Lightning II is the selected IndiaFoxtEcho configuration.

Flight controls
Inherited

The F-35B is the short-takeoff and vertical-landing variant of the F-35 Lightning II.

Trim
Inherited

The profile uses the trim behaviour configured below. Pitch relief is off, with stored authority 0; roll authority is 0.

Autopilot and stability
Inherited

Autopilot following is off; the configured spring and load retain the hardware feel.

Equipment
Inherited

The F-35B is the short-takeoff and vertical-landing variant of the F-35 Lightning II.

Speeds and limits
Inherited

The indicated-speed references set the profile response scale; they are separate from aircraft operating limits.

Simulator integration
Inherited

The profile targets msfs2020, msfs2024. Add-on-specific controls use only the supported references configured by this profile.

Force-feedback settings
Inherited

The settings define the profile’s effect balance. Device output limits affect physical hand force.

Starting settings and their rationale

These configured values are starting estimates. The explanations describe what each setting controls; physical validation appears separately below.

Estimated starting settings · revision 1
SettingStarting valueWhat it controls and why
Spring strengthStarting value0.51 What it controls and whyThis profile uses electronic-control centering for Lockheed Martin F-35 Lightning II. The baseline spring is 0.51. Low-speed spring blending is off.
Master force gainStarting value0.85 What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits.
Profile force gainStarting value0.46 What it controls and whyThe stored 0.46 aerodynamic-load gain is inactive under the fixed-centre control law.
Force tuning speed/referenceStarting value300 ktWhat it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Spring response reference speedStarting value70 ktWhat it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Aileron force scaleStarting value0.72 What it controls and whyRoll and pitch aerodynamic scales are 0.72 and 0.86, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. No custom spring-travel curve is enabled.
Elevator force scaleStarting value0.86 What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Trim feelStarting valueDisabled What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
Trim reliefStarting valueDisabled What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
Autopilot followStarting valueDisabled What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel.
Autopilot neutral holdStarting valueDisabled What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target.
Output force limitStarting value0.55 What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate.
All 44 starting settings and their rationale

The settings define the profile’s effect balance. Device output limits affect physical hand force.

Estimated starting settings · revision 1
SettingStarting valueWhat it controls and why
Spring strengthStarting value0.51 What it controls and whyThis profile uses electronic-control centering for Lockheed Martin F-35 Lightning II. The baseline spring is 0.51. Low-speed spring blending is off.
Spring deadbandStarting value0.04 What it controls and whySets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Profile force gainStarting value0.46 What it controls and whyThe stored 0.46 aerodynamic-load gain is inactive under the fixed-centre control law.
Master force gainStarting value0.85 What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits.
QBlend EnabledStarting valueDisabled What it controls and whyAllows baseline spring strength to rise with indicated airspeed where the control law permits it.
QSpring Minimum FactorStarting value0.55 What it controls and whySets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
QSpring Start KnotsStarting value20 ktWhat it controls and whySets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
Spring response reference speedStarting value70 ktWhat it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Force tuning speed/referenceStarting value300 ktWhat it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Airspeed spring stiffening gainStarting value0 What it controls and whyAdds permitted spring resistance above the full-blend speed. Zero removes this high-speed increase.
Airspeed spring stiffening limitStarting value2 What it controls and whyLimits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Aileron force scaleStarting value0.72 What it controls and whyRoll and pitch aerodynamic scales are 0.72 and 0.86, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. No custom spring-travel curve is enabled.
Elevator force scaleStarting value0.86 What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Output force limitStarting value0.55 What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate.
Trim feelStarting valueDisabled What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
Trim reliefStarting valueDisabled What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
Elevator AuthorityStarting value0 What it controls and whyThe profile uses the trim behaviour configured below. Pitch relief is off, with stored authority 0; roll authority is 0.
Aileron AuthorityStarting value0 What it controls and whyScales supported roll-trim relief and permitted centre movement. Zero removes roll response.
Force Trim EnabledStarting valueDisabled What it controls and whyEnables local force trim, separate from aircraft-owned trim and add-on integration qualification.
GLoad EnabledStarting valueDisabled What it controls and whyAllows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
Rate Damping EnabledStarting valueEnabled What it controls and whyEnables rate damping with the configured coefficients and control law.
Autopilot followStarting valueDisabled What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel.
Autopilot follow authorityStarting value0.1 What it controls and whySets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Autopilot neutral holdStarting valueDisabled What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target.
Autopilot neutral hold strengthStarting value0.6 What it controls and whySets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
EnabledStarting valueEnabled What it controls and whyEnables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
GainStarting value0.1 What it controls and whySets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
GainStarting value0 What it controls and whySets high-Mach buffet strength; onset and full-strength thresholds are separate.
GainStarting value0 What it controls and whySets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Maximum flap indexStarting value2 What it controls and whySets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Minimum flap indexStarting value2 What it controls and whySets the first flap detent that admits buffet; this is a handle index, not degrees.
GainStarting value0 What it controls and whySets gear aerodynamic buffet; movement and ground-contact cues are separate.
Shaker EnabledStarting valueDisabled What it controls and whyPermits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Stick shaker amplitudeStarting value0.5 What it controls and whySets triggered shaker strength; inactive while the shaker feature is disabled.
EnabledStarting valueEnabled What it controls and whyEnables ground effects; each still needs its own strength and contact or motion telemetry.
GainStarting value0.24 What it controls and whySets rolling texture strength, modified by speed, surface and undercarriage configuration.
GainStarting value0.18 What it controls and whySets gear-bump texture during ground motion, separate from touchdown impact.
GainStarting value0.32 What it controls and whySets landing-impact strength; landing telemetry and response shape determine the pulse.
GainStarting value0 What it controls and whySets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
EnabledStarting valueEnabled What it controls and whyEnables engine cues with nonzero settings and valid running-engine telemetry.
GainStarting value0.02 What it controls and whySets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
EnabledStarting valueEnabled What it controls and whyEnables accessory cues with configured strengths and observed accessory movement.
GainStarting value0 What it controls and whySets texture from observed flap movement; a command without movement does not establish the cue.
GainStarting value0.035 What it controls and whySets texture from observed gear movement, separate from aerodynamic and touchdown effects.
Limits and open questions
  • Developer discloses low-speed/high-AoA limitations and approximate performance. AP uses default MSFS logic with optional FCS-reset behavior. No external control-law, hover or servo state is qualified; gear alone cannot infer mode. B18fps custom hover is not a rotorcraft force law.
  • Force magnitudes, response shaping and IAS references are estimates. Installed telemetry and physical acceptance remain deferred.
  • Shared-axis spring scheduling does not model exact gearing or force gradients. No qualified AP-follow contract.

Physical validation

No physical force validation is recorded in this public catalogue for this revision. Documentary review and software checks do not establish how a particular device feels.

FFB-Bridge maintains this profile’s revisions and tuning discussion.

Revision 1 and download availability in FFB-Bridge ↗
Exact profile identity
Profile
addon-indiafoxtecho-f35a
Artifact SHA-256
9316c574b13bc75bbe9e6b974e6cc0886123f4ed034f96fc7608eecd09849924
Bytes
12790
Spring strength
Forces.SpringStrength
Spring deadband
Forces.SpringDeadband
Profile force gain
Forces.ForceGain
Master force gain
Forces.MasterGain
QBlend Enabled
Forces.QBlendEnabled
QSpring Minimum Factor
Forces.QSpringMinimumFactor
QSpring Start Knots
Forces.QSpringStartKnots
Spring response reference speed
Forces.QSpringFullKnots
Force tuning speed/reference
Forces.CruiseSpeedRefKnots
Airspeed spring stiffening gain
Forces.SpringAirspeedStiffenGain
Airspeed spring stiffening limit
Forces.SpringAirspeedStiffenCap
Aileron force scale
Forces.AileronForceScale
Elevator force scale
Forces.ElevatorForceScale
Output force limit
Forces.MaxOutputForce
Trim feel
StickFeel.TrimFeelEnabled
Trim relief
StickFeel.TrimReliefEnabled
Elevator Authority
StickFeel.TrimRelief.ElevatorAuthority
Aileron Authority
StickFeel.TrimRelief.AileronAuthority
Force Trim Enabled
StickFeel.ForceTrimEnabled
GLoad Enabled
StickFeel.GLoadEnabled
Rate Damping Enabled
StickFeel.RateDampingEnabled
Autopilot follow
Autopilot.FollowEnabled
Autopilot follow authority
Autopilot.FollowAuthority
Autopilot neutral hold
Autopilot.NeutralHoldEnabled
Autopilot neutral hold strength
Autopilot.NeutralHoldStrength
Enabled
Aero.Enabled
Gain
Aero.Stall.Gain
Gain
Aero.Mach.Gain
Gain
Aero.Flap.Gain
Maximum flap index
Aero.Flap.MaxFlapIndex
Minimum flap index
Aero.Flap.MinFlapIndex
Gain
Aero.Gear.Gain
Shaker Enabled
Aero.ShakerEnabled
Stick shaker amplitude
Aero.Shaker.Amplitude
Enabled
Ground.Enabled
Gain
Ground.Rumble.Gain
Gain
Ground.Bumps.Gain
Gain
Ground.Thump.Gain
Gain
Ground.Reverse.Gain
Enabled
Engine.Enabled
Gain
Engine.Rumble.Gain
Enabled
Mechanical.Enabled
Gain
Mechanical.FlapMotion.Gain
Gain
Mechanical.GearMotion.Gain
Explore all built-in profile references →

Content expanded · What’s new

Something missing or a source that needs attention?

Suggest a correction ↗