ZENITH AIRCRAFT / LIGHT SPORT

Zenith CH 701

The Zenith CH 701 is an all-metal light aircraft designed for short takeoffs and landings.

+ Compare aircraft

Choose the version you fly to narrow the edition-specific reading.

Wingspan27 ft
Length20 ft 11 in
Wing area122 sq ft
Empty weight580 lb
Gross weight1,100 lb
Useful load520 lb
Fuel capacity20 US gal
Simulator ecosystemsMSFS
YOUR AIRCRAFT COMPANION

Start here

A few places to begin, from the aircraft’s story to the people who fly it.

Aircraft history

Meet the aircraft

The Zenith CH 701 is an all-metal light aircraft designed for short takeoffs and landings.

Zenith CH 701

contrail.shop · Read more ↗
THE AIRCRAFT

Meet Zenith CH 701

The Zenith CH 701 is an all-metal light aircraft designed for short takeoffs and landings.

FAMILY, MODELS & VARIANTS

Zenith CH 701

Zenith Aircraft → · Explore the family →

Aircraft type designators

No type designator selected for this reference.

HOW IT CAME TO BE

History & design

An off-airport kit aircraft

Chris Heintz’s CH 701 was introduced in 1986 for short-field operation and home construction. Its design combined fixed leading-edge slats, full-span flaperons and an all-moving rudder in an all-metal aircraft.

Zenith Aircraft · Introducing the STOL CH 701 ↗

Original design

Improving the kit while retaining the concept

Zenith describes later changes as improvements in useful load, kit construction and instructions while retaining the underlying design. The aircraft’s appearance follows its short-field purpose rather than a conventional streamlined touring-aircraft shape.

Zenith Aircraft · Introducing the STOL CH 701 ↗

Manufacturer development account

UNDER THE SKIN

Systems & details

Full-span flaperons do two jobs

The trailing-edge surfaces combine flap and aileron functions. The sample manual shows a central Y-shaped dual control stick, electrically operated elevator trim and rudder pedals linked to a steerable nosewheel. These details explain the cockpit layout without implying every builder has identical equipment.

CH 701 sample manual, section 7
Zenith Aircraft · STOL CH 701 operating manual sample ↗
VIRTUAL VERSIONS

In your simulator

Systems, equipment and documentation for each developer’s aircraft.

MSFS 2020 · MSFS 2024

Zenith CH701 STOL

SimWorks Studios · Released

MSFS 2020 · MSFS 2024Third-party add-on

Aircraft

Products and variants
ProductSimulatorProduct type
Zenith CH701 STOL ↗ReleasedMSFS 2020 · MSFS 2024 One listed product covers the stated simulator editions; no separate native purchase is inferred.Aircraft

One listed product covers the stated simulator editions; no separate native purchase is inferred.

GO TO THE SOURCE

Manuals & resources

Find your next read

Choose a topic for a short introduction and a link to the original source. Simulator references identify the developer and edition they cover.

Manufacturer, developer or authorized-product aircraft context

Zenith CH 701 — aircraft backgroundZenith CH 701

Background on the all-metal Zenith CH 701 and its short-takeoff-and-landing design.

Aircraft-context passage, preserved text line 66; reviewed 2026-09-29

contrail.shop · Read the source ↗

Developer documentation

Zenith CH701 STOL — product listingZenith CH701 STOL · MSFS 2020 · MSFS 2024

Individual product listing and edition passage reviewed 2026-09-29

contrail.shop · Read the source ↗

Read the original documentation from the people who created it. Manuals open on their publisher’s website.

Manufacturer, developer or authorized-product aircraft context

↗Zenith CH 701 — aircraft backgroundcontrail.shop · Aircraft-context passage, preserved text line 66; reviewed 2026-09-29

Manufacturer aircraft information

↗STOL CH 701 specificationsZenith Aircraft · STOL CH 701: Zenith 1,100 lb gross-weight configuration ↗Introducing the STOL CH 701Zenith Aircraft · Manufacturer design history ↗STOL CH 701 operating manual sampleZenith Aircraft · Sample operating manual, section 7
AIRCRAFT AND FEEL

Built-in force-feedback profiles

Read the documentary basis, editable starting settings and remaining questions for the aircraft you fly. Each explanation refers to the exact profile revision shown.

Catalogue programme-20261022-v1 · 6 profile choices

FFB-BRIDGE BUILT-IN PROFILE

Zenith CH701 Skis

Free and ProRevision 1Partial review

The Zenith CH 701 is an all-metal light aircraft designed for short takeoffs and landings.

Aircraft and simulator scope

  • Zenith CH701 Skis · MSFS 2020 · Variant starting point
  • Zenith CH701 Skis · MSFS 2024 · Variant starting point
  • Zenith CH701 Skis · X-Plane 12 · Variant starting point

Universal named airframe/configuration; intended MSFS2020/MSFS2024/XP12 starting point, not add-on or edition acceptance. · Physical facts and prior documentary review are reused from their archived dated sources; new market availability is not inferred.

The simulator model and controls

The Zenith CH 701 is an all-metal light aircraft designed for short takeoffs and landings.

How this profile feels

Spring resistance builds with the selected airspeed response. A separate aerodynamic term adds speed-dependent control load.

Valid trim provides the configured pressure relief. Autopilot following is off.

Aircraft and configuration

Fixed slats, full-span Junkers flaperons and the documented ski configuration. The SimWorks simulator guide describes flap positions of 0/15/37/55 degrees; this is the simulator schedule, not a universal CH701 schedule.

About the values

Strengths are normalized hardware-feel settings. They set the effect balance; hand force depends on the device and its limits. The IAS reference is a tuning value.

What the documentation establishes

Zenith CH701 Skis: Fixed slats, full-span Junkers flaperons and the documented ski configuration. The SimWorks simulator guide describes flap positions of 0/15/37/55 degrees; this is the simulator schedule, not a universal CH701 schedule.

Documentary review and sources

These decisions describe the documentary basis and remaining gaps for this revision. Aircraft documentation and a starting setting describe different kinds of evidence.

Equipment
Inherited

Fixed slats, full-span Junkers flaperons and the documented ski configuration. The SimWorks simulator guide describes flap positions of 0/15/37/55 degrees; this is the simulator schedule, not a universal CH701 schedule.

Starting settings and their rationale

These configured values are starting estimates. The explanations describe what each setting controls; physical validation appears separately below.

Estimated starting settings · revision 1
SettingStarting valueWhat it controls and why
Spring strengthStarting value0.74 What it controls and whyThis profile uses reversible-control loading for Zenith CH 701. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 35 KIAS.
Master force gainStarting value0.85 What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits.
Profile force gainStarting value0.8 What it controls and whyThe aerodynamic-load gain is 0.8 with an indicated-speed reference of 65 KIAS. This supplies speed-dependent loading alongside the spring.
Force tuning speed/referenceStarting value65 ktWhat it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Spring response reference speedStarting value35 ktWhat it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Aileron force scaleStarting value0.72 What it controls and whyRoll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.
Elevator force scaleStarting value1.0 What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Trim feelStarting valueEnabled What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
Trim reliefStarting valueEnabled What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
Autopilot followStarting valueDisabled What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel.
Autopilot neutral holdStarting valueDisabled What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target.
Output force limitStarting value0.55 What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate.
All 44 starting settings and their rationale

The settings define the profile’s effect balance. Device output limits affect physical hand force.

Estimated starting settings · revision 1
SettingStarting valueWhat it controls and why
Spring strengthStarting value0.74 What it controls and whyThis profile uses reversible-control loading for Zenith CH 701. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 35 KIAS.
Profile force gainStarting value0.8 What it controls and whyThe aerodynamic-load gain is 0.8 with an indicated-speed reference of 65 KIAS. This supplies speed-dependent loading alongside the spring.
Elevator force scaleStarting value1.0 What it controls and whyScales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Aileron force scaleStarting value0.72 What it controls and whyRoll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.
Output force limitStarting value0.55 What it controls and whyCaps directed-force output. Native spring effects and device limits remain separate.

Zenith CH701 Skis: Electric elevator trim only. Developer removed aileron/rudder trim; roll authority zero. Manual flaperons and intended high-flap nose-down remain simulator-owned; no force-bias cancellation or trim command. Manufacturer sample is architectural evidence,notexact80/110hpspeedcalibration. Estimated pitch/roll trim authorities 0.3/0; exact add-on sign, travel, units and build-specific neutral remain unqualified. Rudder trim never substitutes for roll trim.

Estimated starting settings · revision 1
SettingStarting valueWhat it controls and why
Elevator AuthorityStarting value0.3 What it controls and whyThe profile uses the trim behaviour configured below. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.
Aileron AuthorityStarting value0 What it controls and whyScales supported roll-trim relief and permitted centre movement. Zero removes roll response.

Zenith CH701 Skis: 65 KIAS is the retained estimated tuning reference. It is not published cruise TAS, VNE, a new flight limit or a measured force threshold. Source-specific operating quantities remain attached to their original configuration and conditions.

Estimated starting settings · revision 1
SettingStarting valueWhat it controls and why
Force tuning speed/referenceStarting value65 ktWhat it controls and whySets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.

Flap movement texture is an estimate. A position schedule does not establish motor torque or a persistent flap force.

Estimated starting settings · revision 1
SettingStarting valueWhat it controls and why
GainStarting value0.12 What it controls and whyFlap movement texture is an estimate. A position schedule does not establish motor torque or a persistent flap force.
GainStarting value0 What it controls and whyFlap movement texture is an estimate. A position schedule does not establish motor torque or a persistent flap force.

Exact configured values with software explanations. Force magnitudes remain editable estimates; disabled features retain inactive values.

Estimated starting settings · revision 1
SettingStarting valueWhat it controls and why
Spring deadbandStarting value0.045 What it controls and whySets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Master force gainStarting value0.85 What it controls and whyScales overall profile strength while preserving effect balance, subject to device and output limits.
QBlend EnabledStarting valueEnabled What it controls and whyAllows baseline spring strength to rise with indicated airspeed where the control law permits it.
QSpring Minimum FactorStarting value0.5 What it controls and whySets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
QSpring Start KnotsStarting value10 ktWhat it controls and whySets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
Spring response reference speedStarting value35 ktWhat it controls and whySets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Airspeed spring stiffening gainStarting value0.15 What it controls and whyThe high-speed spring-stiffening gain is 0.15. It strengthens the permitted spring response above 35 KIAS, with the squared-speed ratio capped at 5.
Airspeed spring stiffening limitStarting value5 What it controls and whyLimits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Trim feelStarting valueEnabled What it controls and whyRetained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
Trim reliefStarting valueEnabled What it controls and whyAllows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
Force Trim EnabledStarting valueDisabled What it controls and whyEnables local force trim, separate from aircraft-owned trim and add-on integration qualification.
GLoad EnabledStarting valueEnabled What it controls and whyAllows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
Rate Damping EnabledStarting valueEnabled What it controls and whyEnables rate damping with the configured coefficients and control law.
Autopilot followStarting valueDisabled What it controls and whyAutopilot following is off; the configured spring and load retain the hardware feel.
Autopilot follow authorityStarting value0.1 What it controls and whySets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Autopilot neutral holdStarting valueDisabled What it controls and whyPermits centering hold during a supported AP state, separate from following a moving target.
Autopilot neutral hold strengthStarting value0.6 What it controls and whySets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
EnabledStarting valueEnabled What it controls and whyEnables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
GainStarting value0.35 What it controls and whySets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
GainStarting value0 What it controls and whySets high-Mach buffet strength; onset and full-strength thresholds are separate.
Maximum flap indexStarting value3 What it controls and whySets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Minimum flap indexStarting value2 What it controls and whySets the first flap detent that admits buffet; this is a handle index, not degrees.
GainStarting value0 What it controls and whySets gear aerodynamic buffet; movement and ground-contact cues are separate.
Shaker EnabledStarting valueDisabled What it controls and whyPermits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Stick shaker amplitudeStarting value0.5 What it controls and whySets triggered shaker strength; inactive while the shaker feature is disabled.
EnabledStarting valueEnabled What it controls and whyEnables ground effects; each still needs its own strength and contact or motion telemetry.
GainStarting value0.15 What it controls and whySets rolling texture strength, modified by speed, surface and undercarriage configuration.
GainStarting value0.1 What it controls and whySets gear-bump texture during ground motion, separate from touchdown impact.
GainStarting value0.35 What it controls and whySets landing-impact strength; landing telemetry and response shape determine the pulse.
GainStarting value0 What it controls and whySets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
EnabledStarting valueEnabled What it controls and whyEnables engine cues with nonzero settings and valid running-engine telemetry.
GainStarting value0.12 What it controls and whySets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
EnabledStarting valueEnabled What it controls and whyEnables accessory cues with configured strengths and observed accessory movement.
GainStarting value0 What it controls and whySets texture from observed gear movement, separate from aerodynamic and touchdown effects.
Limits and open questions
  • Zenith CH701 Skis is a universal starting point; exact add-on matching, edition operation and physical hand-force calibration remain unqualified.
  • Autopilot movement and unknown custom trim, failure or force-input signals are disabled. Confirm the selected equipment fit and trim direction for the implementation in use.
  • Force magnitudes and speed tuning are editable inherited estimates. Owner physical and installed-aircraft acceptance remain pending.

Physical validation

No physical force validation is recorded in this public catalogue for this revision. Documentary review and software checks do not establish how a particular device feels.

FFB-Bridge maintains this profile’s revisions and tuning discussion.

Revision 1 and download availability in FFB-Bridge ↗
Exact profile identity
Profile
airframe-zenith-ch701-skis
Artifact SHA-256
1224eddda8b42fd552783525785fe85f6850099fd0261759826f4502afea0808
Bytes
14864
Spring strength
Forces.SpringStrength
Profile force gain
Forces.ForceGain
Elevator force scale
Forces.ElevatorForceScale
Aileron force scale
Forces.AileronForceScale
Output force limit
Forces.MaxOutputForce
Elevator Authority
StickFeel.TrimRelief.ElevatorAuthority
Aileron Authority
StickFeel.TrimRelief.AileronAuthority
Force tuning speed/reference
Forces.CruiseSpeedRefKnots
Gain
Mechanical.FlapMotion.Gain
Gain
Aero.Flap.Gain
Spring deadband
Forces.SpringDeadband
Master force gain
Forces.MasterGain
QBlend Enabled
Forces.QBlendEnabled
QSpring Minimum Factor
Forces.QSpringMinimumFactor
QSpring Start Knots
Forces.QSpringStartKnots
Spring response reference speed
Forces.QSpringFullKnots
Airspeed spring stiffening gain
Forces.SpringAirspeedStiffenGain
Airspeed spring stiffening limit
Forces.SpringAirspeedStiffenCap
Trim feel
StickFeel.TrimFeelEnabled
Trim relief
StickFeel.TrimReliefEnabled
Force Trim Enabled
StickFeel.ForceTrimEnabled
GLoad Enabled
StickFeel.GLoadEnabled
Rate Damping Enabled
StickFeel.RateDampingEnabled
Autopilot follow
Autopilot.FollowEnabled
Autopilot follow authority
Autopilot.FollowAuthority
Autopilot neutral hold
Autopilot.NeutralHoldEnabled
Autopilot neutral hold strength
Autopilot.NeutralHoldStrength
Enabled
Aero.Enabled
Gain
Aero.Stall.Gain
Gain
Aero.Mach.Gain
Maximum flap index
Aero.Flap.MaxFlapIndex
Minimum flap index
Aero.Flap.MinFlapIndex
Gain
Aero.Gear.Gain
Shaker Enabled
Aero.ShakerEnabled
Stick shaker amplitude
Aero.Shaker.Amplitude
Enabled
Ground.Enabled
Gain
Ground.Rumble.Gain
Gain
Ground.Bumps.Gain
Gain
Ground.Thump.Gain
Gain
Ground.Reverse.Gain
Enabled
Engine.Enabled
Gain
Engine.Rumble.Gain
Enabled
Mechanical.Enabled
Gain
Mechanical.GearMotion.Gain
Explore all built-in profile references →

Content expanded · What’s new

Something missing or a source that needs attention?

Suggest a correction ↗